Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AUTO START
SWITCH
TUBE
STIFFENER 3
CHEMICAL
TUBING 3
WALL
DRAIN FLOOR DRAIN
Connect the drain pipe from scrap Connect dishmachine to hot water source Insert tube stiffener with chemical tubing
accumulator to floor or wall drain. recommended 140 temperature (120 into each corresponding chemical
minimum temperature required). dispensers.
PN: 10130.07 11-2016
Models AH, C, B, MODEL AH FRONT VIEW
CB and Scullery B
Quick Setup 5 PRIMER
SWITCHES
FILL/START
SWITCH 6
Instructions PERISTALTIC
DOOR
HANDLE 7
WARNING: Electrical and plumbing connections PUMP
need to be made by a licensed service person
and comply with all Federal, State and Local
Health, Electrical, Plumbing and Safety codes.
STEP
STEP
5 LLIF
ACCUMULATOR
Press and hold down the three Primer Toggle LEVELING
Switches for the chemical pumps until product LEGS 4
is discharging into the machine.
STEP STEP
6 7
FILL
Press and hold the Fill/Start Switch until the To start machine close the doors. The machine
water level is approximately 1/2" to 3/4" below will automatically start and run through its cycle.
the overflow hole in the PVC standpipe.
an Ali Group Company
11-2016