Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Note:- M3 machine installation Bootable pend diver required please contact Zonal Application team
Open Pos bios settings F2 and do the necessary settings as it is in below picture.
After configuring the BIOS please press F4 and save the changed
Settings
Start the pos machine installation M3 bootable Pen drive
Read cdrom 9.0 configuration
0 == no
Select 0 and press Enter
Enter your own IP address
EX: 010.112.097.101
Enter your Subnet mask
EX: 255.255.240.000
Enter Your Gateway IP Address
EX: 010.112.097.001
Select LAN card
Select 35 (82567/e1000e)
Change the LANcard ?
Select 0 and press Enter
Enter nfs server IP address
EX: 010.112.097.100
Enter mount directory on nfs server
0 - /home/tplinux/linux/pos
1 - /home/tplinux/linux1
2 - /home/tplinux/linux2
3 - /home/tplinux/linux3
4 - /home/tplinux/linux4
5 - /home/tplinux/linux5
6 - /home/tplinux/linux6
7 - /mnt
0 – yes
1 - Go back [Enter installation source]
*************************************************
enter keyboard layout for the Operating System:
0 - GER
1 - US
2 - FRANCE
3 - BELGIUM
4 - DENMARK
5 - SPAIN
6 - FINLAND
7 - ITALY
8 - POLAND
9 - PORTUGAL
10 – OTHER
Continue installation ?
0 - yes
1 - Go back [Enter language configuration]
->0
Select 0 and press Enter
Continue installation?
0 – yes
*************************************************
Enter device configuration.
*************************************************
Select number of device configuration
file on nfs server/cd:
0 - config_0 (Example file.)
1 - config_1 - 1
2 - config_2 - 2
0 == no, 1 == yes
ask_devices_not_auto
Kbd:no/pc(0),Auto(1),ncr5932(2),Preh(3),Posiflex(4)NSJJKB01(5),dummy(6
)
6 (Select 6 and press Enter)
->0
ETurboTouch(Only CentOS): no(0), COMx: x = {1...20}
->0
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
->1
Select 1 and press enter
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
Select 5 and press Enter for (others for MSR & Pol Display configuration)
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
->1
Select 1 and press Enter
ok ? (1 == yes)
->1
Select 1 and press Enter.
Continue installation?
0 - yes
1 - Go back [Enter device configuration]
->0
Select 0 and press Enter.
Device configuration saved in ramfilesystem.
*************************************************
Enter harddisk configuration.
*************************************************
Continue installation?
0 - yes
1 - Go back [Enter harddisk configuration]
->0
Select 0 and press Enter
Continue installation !
ok ? (1 == yes)
->1
Select 1 and press Enter
It will take 35 Mints time installation
Remove the USB Drive and Press ENTER., the POS reboot automatically
*USB_SCANNER_GEN1=05e0:1300
:wq
Below Vanilla Screen came in Pos machine please Call Remote Application team Run Enable V2
command.
After reboot Pos machine store Bill screen came and check Pos Machine function testing.
Whenever run changeconfig command run copy touch file Server to Pos machine for M3 pos
cd /home/tplinux/linux/pos/pos/files/sg-files/XFpatch/
scp XF86Config root@p4:/etc/X11/
0 - end
1 - base (kbd, vga, touch, mouse)
2 - monitor 1
4 - printer
5 - others
6 - ibm
7 - usb
8 - MF devices
9 - transparent
10 - UDM/JavaPOS Printer
11 - UDM/JavaPOS Scanner
Press 5 other for (MG3200 & 9800i Scanner)
Scanner 1: no(0), COMx: x = {1...20}
->5
Select 5 and press Enter
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
->1
Select 1 and press Enter
->0
Select 0 and press Enter
0- end
1- base (kbd, vga, touch, mouse)
2- monitor 1
4- printer
5- others
6- ibm
7- usb
8- MF devices
9- transparent
10- UDM/JavaPOS Printer
11- UDM/JavaPOS Scanner
Press 0 – end and save the configuration.
Press 0 – continue – Yes
Once the changes are completed Reboot pos machine and Copy touch file
copy touch file Server to Pos machine for M3 pos
cd /home/tplinux/linux/pos/pos/files/sg-files/XFpatch/
scp XF86Config root@p4:/etc/X11/