ussR
BRANCH STANDARD
OIL TREATING PLANTS
PARAMETRIC SERIES
OST 39-061-78
OFFICIAL EDITIONDEVELOPED AND INTRODUCED by the State Institute for Designing and Research Works
in Oil Industry "“Giprovostokneft”
Director P.APaliy
Chief engineer K.S.Kasparyants
Head of standardization department, theme supervisor Yu.D.Viadimirov
Group leader A.\V.Mulyukina
Senior engineer M.A.Pospelova
by the All-Union Scientific-Research and Planning and Design Institute of Complex Automation of Oil
and Gas Industry "VNIIKAneftegas"
Director A\.Sinelnikov
Head of department, theme supervisor G.N.Vyazenkin
Head of laboratory 1.2. Yulmetyev
PREPARED FOR APPROVAL by the Technical Department of the Ministry of Oil Industry
Head of Department G.l.Grigorashenko
Head of standardization department V.M.Frolov
AGREED by the Department for development of machinery, technology and organization of
cil and gas production.
Deputy head of Department A.A Javadyan
Head of department of oil gathering and treating facilities N.M.Baykov
by the Department of capital construction
Deputy head of department - chief engineer B.N.Danaurov
by the All-Union Scientific-Research Institute of Organization and Economics of Gas and Oil Industry.
Director R.Sh.Mingareev
Head of standardization laboratory V.N.Tuchin
APPROVED by the Ministry of Oil Industry
PUT INTO EFFECT BY ORDER OF THE MINISTRY OF
OIL INDUSTRY No.413 of 20 August, 1978.BRANCH STANDARD
OIL TREATING PLANTS OST 39-061-78
Parametric series Put into effect for the first
time
By order of the Ministry of Oil Industry No.413 of 6 August, 1979,
Time of putting into effect is established
from 1 January, 1980
The present standard applies to oil treating plants (OTP) used in the oil industry complete
with unitized automated equipment (UAE) made as separate prefabricated monofunctional or multi-
functional process units (FPU) in order to industrialize the construction of the OTP.
The standard is binding for organizations dealing with the development of and putting into
production the functional process units of oil treating plants, as well as with designing both the new
and revamped OTP in unitized complete version.
The standard establishes:
414,
12
parametric series of OTP capacities;
main types and modifications of OTP;
range of main FPU;
parametric series of main FPU;
order of selection of OTP delivery completeness.
|, PARAMETRIC SERIES OF OTP CAPACITIES
The main parameter of tactical characteristics and specifications of the OTP is their
capacity measured in tons per day (24 hours) based on commodity oil.
The parametric series of OTP capacities on the basis of statistical and forecast data
assumed in accordance with GOST 8032-56 in R10 series, is presented in Table 1
. Table 1
Capacity of OTP, tons/day of commodity oil
“400
500 630 800 7000 | 1250] 1600 ] 2000 | 2500
‘3150
ao00 | 5000 | 46300 | 8000 | 10000 | 12500 | 16000 | 20000
13,
14,
‘The preferred (most frequently used) range of capacities in the parametric series is
within the limits of 3150 to 2000 tonsidays.
The series of main primary capacities subject to frequent use is marked in Table 1
with bold lines.