Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
A contour change between two linear entities often includes a blend arc. Blend arc is an arc that is tangent to the
two adjacent entities and has a known radius. It can be a defined functional radius, or just a corner break with a
small radius selected by the CNC programmer. In either case, the objective of this project is to calculate the two
XY points of a blend arc, when the arc is dimensioned to a sharp point.
Compare with project 53-07, which is similar, but the arc is dimensioned to its center.
1.625
P1
P2
R1.25
2.0
0.5
3.0