Sei sulla pagina 1di 10

(Questionnaire created by Engr.

Orpilla)

 
CE514 FINAL EXAM 1st semester S.Y. 2016-2017

1. That which is built or constructed, an edifice or building of any kind or any piece of work artificially built up, the parts joined
in some definite manner.
-structure

2. Number of cement bags used for 5.5m3 sand of class B plaster.

. .
.
.
.
3. Vertical wall stud.
‐Pilarete

4. Determine the height of a cylindrical water tank having a diameter of 1.80m if the red oxide primer paint (20m2/4Llters) used
was 10 liters.

.
∴ .

The volume of 4.5 board foot of wood.


.

5. The total cost of No. 16 GI tie wire used for the 45m2 CHB wall (having D10mm rebars at.40m OC BW), If one kilogram of
wire cost Php 70.00.
. .
.


. @
.

6. A window type that pivotes to open about a horizontal axis.


‐Horizontal Pivot Window

7. What is the area of CHB unplastered wall (using 4” CHB) If 25.8 bags of cement were used in its installation?
.

. .
.
.
.
. ∼ .

8. Union, Coupling, Elbows, Sheet Elbow, cross tee are examples of?
-Fittings

9. How many pieces of 2”x4”x16’ can be purchased with Php 14,600.00 if one BF costs Php 25.00.
, . "x4"x16'

10. What is the area of an excavated hole having a height of 1.50m if the total excavation cost amounted to Php 600.00 and the unit
excavation cost is Php 25.00 per m2?

 
(Questionnaire created by Engr. Orpilla)

 
. .

. .

∴ .

11. Total BF of 2”x2” ceiling joist at 0.40m OC BW for a 25m2 area.


. .
. ∼ .
"x2"x20.0244'
: .

12. The length of a riprap wall having a height of 4.8m and a width of 0.60m, If the riprap contractor ordered a volume of 55m3 of
boulders.
. . .

. . .
.

13. What is the normal height of commercially available doors?


-2.10m

14. Determine the length of an RC beam if the 2”x3” scaffolds used amounted to PHp 1940.00 and BF costs Php 28.00 (scaffold
factors: V=6, H=7)

∴ .

15. Solve for the height of the triangular masonry wall having a base of 60m, if the thinning agent used for the latex paint (30 m2 /4
Liters) to double coat the wall was 6L water?

∴ .

16. The number of 30cm x 60cm tiles installed if the total weight of the tile grout used is 24 kilograms.
.

. .

17. The generic term to specify the paint appropriate for wood surfaces.
-enamel

18. Determine the thickness of a 4m x6m concrete slab if the total cost of water used was Php 1430.0 and water cost Php 5.00 per
gallon.

, .


.
.

19. How many 2” x 8” x 14’ floor joists spaced at 0.25m OC were installed in a wood floor frame if the carpenters used 6.60 kg of
4” CWN (0.17kgs/m3)?

 
(Questionnaire created by Engr. Orpilla)

 
.

.
.
.
.

20. A gable roof used 13pcs of prefab gutter (eff. Length = 2.35m) and its sloping side measured 10ft Determine the total cost of
the GI roof sheet used if cost is Php 35.00 per foot.

∴ .

.
.

.
∴ . @
, .

21. If the total project cost is 3.5M where, the labor cost is 45% of the materials, contingency is 5% of the materials, contractor’s
profit is 12% of Labor and Materials, overhead is 2% of materials, how much is the contractor’s profit?
. . . . . .
∴ , , .
. . , , .
, .

22. Red lead, Red oxide and zinc chromate are examples of?
‐Primer Paints for Acrylic

23. The cost of ½ “ diameter GI pipe used for a total length of 63m water supply line, if one GI pipe cost Php 350.00

.
∴ " ′ @
.

24. Pipe that conveys the rainwater from the roof gutter to the catch basin.
-

25. The cost of water used to rough plaster (20mm thick) a CHB wall was P450. Determine the number of CHB installed if water
cost Php 5.00/ gal.

.
.

∴ .
.
∴ .
.
.

26. How many 4” diameter PVC pipe are to be used for the sanitary installation having a total length of 38m.

 
(Questionnaire created by Engr. Orpilla)

 
27. The cost of water used to install 20cm x 30cm wall tiles was Php 40.00 Determine the number of wall tiles installed.

.
.

∴ .

∴ .

. .

28. Determine the total cost of plywood (Php 300/pc) required for a wooden partition that used 18 pcs of 2” x 2” x 12’ wall studs
spaced at 0.60m 0c BW.

.

"x3"x12' 108BF
: . . . ∼ .
"x3"x17.102'
.

.
.
. .
@
.

, .

29. Determine the cost of D10mm x 6m RSB used for the lateral ties (spaced at 0.20m OC) of a 0.40m x 0.40m x 4.50m column.
.
.
.
.



.

 
(Questionnaire created by Engr. Orpilla)

CE 514 Midterm Exam Short Term 2018

1. Determine the height of a concrete column if the 2”x3” scaffolds used amounted to Php 3240.00 and one BF costs Php
35.00 (the scaffold factors: V:7,H:16,D:15)

∴ .
2. Determine the total BF of 2”x2” ceiling joists (spaced at .40m OC BW) used for a 27.35m2 of ceiling area.

. .

. ∼ .

"x2" . ′
: .

. .

. ~
3. Pilipino term for ceiling joists.
‐KOSTILYAHE

4. What is the area of CHB unplastered wall (using 4” CHB) If 30.8 bags of cement were used in its installation?

.
.

.
. .

∴ . ∼ .
5. If the total project cost is 7.55 Million; where the labor cost is 43% of the materials, contingency is 4% of the materials,
contractor’s profit is 11% of Labor and materials, overhead is 2% of materials; what is the labor cost?
. . . . . .

∴ , , .

∴ . , , .

, , .
6. From 5, how much is the contractor’s profit?

∴ . . , , .

, .
7. From 5, how much is the overhead cost?

, , . .
, .
8. A built up piece of wood made up of veneer glued together and usually laid with the wood grains of adjoining layers at
right angles.
‐PLYWOOD

9. Determine the length of an RC beam if the 2”x3” scaffolds used amounted to Php 3,730.00 and one BF costs Php 35.00
(Scaffolds factors: V=6,H=7)

.
.

∴ .

 
(Questionnaire created by Engr. Orpilla)

 
10. Number of cement bags used for a 7.5m3 of sand for class B plaster.

. .
. ~ .
.
.
11. Determine the total cost of plywood (Php 370/pc) required for a wooden partition that used 18pcs of 2”x3”x14’ wall studs
spaced at 0.60m OC BW.

. .

. ~ .
"x3" . ′
: .

x3

.
.
. .
. ~ @
.
∴ , .
12. Pilipino term for horizontal wall stud.
-Pabalagbag

13. The cost of water used to rough plaster (20mm thick) a CHB wall was Php 475.00. Determine the number of CHB
installed if water costs Php 5.00/gal.
. . . .
.
.
.

∴ . ~
14. The volume corresponding to 135 Board Foot of wood.

,
15. Determine the total cost of plywood (Php 495/pc) used as ‘forms’ for eight (8) grade beams having each a dimension of
0.30x0.40 and length of 6.90m.
. . . .
. .
. ~ @
.
∴ , .
16. From 15, what is the total cost of 2”x2” braces used if 1BF costs Php 35.00?
.
. . . ~ @
∴ , .
17. Determine the thickness of a 4.5mx7.5m concrete slab, if the total cost of water used was Php 2730.00, and water cost Php
5.00/gal.
.
. . . .
∴ .
18. What is the total cost of water used in concreting a 0.35x0.45x4.55 m beam, if water costs Php 5.00/gal?
. . . . .
. .
.
. @

∴ .

 
(Questionnaire created by Engr. Orpilla)

 
19. Pilipino term for the installation of CHB.
-ASINTADA

20. How many pieces of 2”x8”x16’ can be purchased with Php 33,100.00, if one board foot costs Php 35.00.
, . x8

.

∴ . ~

PROBLEM:
The wooden partition shown is constructed using the following materials;
a. " thick plywood, and
b. 2”x3” wall studs, with the vertical studs spaced at 0.40 m OC and the horizontal studs spaced at 0.60m OC.

DETERMINE:

____________ Pcs "x4’x8’ plywood


4.80m
____________ Pcs 2”x3”x10’ wall studs 8.50m

2.85m

SOLUTION:
1m 
a. . . . . .
.
0.4m 
.
. ~
 1m  .

b. . . . ~ .
0.6m  " " . ′
: .

. . . ~
0.4m  0.4m  0.2m 
" " ′

" "

 
(Questionnaire created by Engr. Orpilla)

 
CE514 Midterm Exam 1st semester S.Y. 2016-2017

1. Determine the height of a concrete column if the 2”x3” scaffolds used amounted to Php 3240.00 and one BF costs Php
30.00 (the scaffold factors: V:7,H:16,D:15)

∴ .
2. What is the total number of D10mm x 6m (spaced at 0.40m OC BW) for 35m2 of CHB wall?

1m 
0.2m 
: . .

0.4m  .
1m 

0.4m 

0.4m  0.4m  0.2m 

3. Determine the total BF of 2”x2” ceiling joists (spaced at 0.4m OC BW) for a 52.35 of ceiling area.
. .
. ∼ .
"x2"x20.0244'
: .

. .

4. The total cost of no.16 GI wire used for the 75 CHB wall (having D10mm rebars at 0.60m OC BW) if one kg of wire
costs Php 75.00.

: . .
. .
. @

∴ .
5. What is the total cost of water used in concreting a 0.35x0.45x4.55 m beam, if water costs Php 5.00/gal?
. . . . .
. .
.
. @

∴ .

6. Determine the cost of D10mm x 6m RSB ( used for the lateral ties (spaced at 0.2m OC) of a 0.40x0.40x3.10 m
column.
. . . .
.
. ~
.

@
~
.
∴ .
7. What is the area of CHB unplastered wall (using 4” CHB) If 30.8 bags of cement were used in its installation?

.
.

 
(Questionnaire created by Engr. Orpilla)

 
.
. .

∴ . ∼ .
8. If the total project cost is 8.5M where, the labor cost is 43% of the materials, contingency is 4% of the materials,
contractor’s profit is 11% of Labor and Materials, overhead is 2% of materials, what is the labor cost?
. . . . . .
∴ , , .
. , , .
, , .
9. From 8, how much is the contractor’s profit?

. . , , .
, .
10. From 8, how much is the overhead cost?
, , . .
, .
11. How many pieces of 2”x8”x16’ can be purchased with Php 37,100.00 if one BF costs Php 35.00.
, . "x8"x16'

∴ . ~
12. Determine the length of an RC beam if the 2”x3” scaffolds used amounted to Php 3,940.00 and one BF costs Php 32.00
(Scaffolds factors: V=6,H=7)

.
.

∴ .
13. Number of cement bags used for a 8.5m3 of sand for class B plaster.

. .
. ~ .
.
.
14. Determine the total cost of plywood (Php 300/pc) required for a wooden partition that used 18 pcs of 2” x 3” x 14’ wall
studs spaced at 0.60m 0c BW.

.

"x3"x14' 126BF
: . . . ∼ .
"x3"x17.102'
.

.
.
. .
@
.

, .
15. What is the length of a riprap wall having a height of 3m & a width of 0.5m, if the contractor ordered a volume of 85
of boulders?
. .
∴ .
16. Determine the thickness of a 4.5x7.5m concrete slab, if the total cost of water used was Php 2530.0 and water cost Php
5.00 per gallon.

. .

 
(Questionnaire created by Engr. Orpilla)

 
, .


. . .
.
17. A gable roof has its sloping side measured at 3.50m & length of 7.50m. Determine the total cost of 2”x3” purlins (spaced
at 0.6m OC) if one BF costs Php35.00.
. ~ .
.
.
"x3" =252BF
x3
.
@
∴ , .
18. From 17, what is the total cost of 1”x12” Fascia Board (1BF is Php 40.00)?
. ~ . ;
. ~ . ;
"x12" ′
"x12" BF
.
@
∴ , .
19. The cost of water used to rough plaster (20mm thick) a CHB wall was Php 475.00. Determine the number of CHB
installed if water costs Php 5.00/gal.
. . . .
.
.
.

∴ . ~
20. The volume corresponding to 165 Board Foot of wood.

21. Determine the total cost of plywood (Php 300/pc) used as ‘forms’ for eight (8) grade beams having each a dimension of
0.30x0.40 and length of 6.90m.
. . . .
. .
. ~ @
.
∴ , .
22. From 21, what is the total cost of 2”x2” braces used if 1BF costs Php 30.00?
.
. . . ~ @
∴ , .
23. A wood Floor Framing has dimensions of 3.5m x4.8m. Determine the cost of the 2”x10” double girder support used if
1BF cost Php 40.00.
. ~ . ;
.
"x10" @
∴ , .
24. From 23, what is the total cost of 2”x8” floor joist (spaced at 0.25m OC) if 1BF cost Php 35.00.

. .
. ~ . ;
.
.
"x8" @
∴ , .
25. From 23, what is the total cost of "x8" bridging installed @ 3rd points if 1BF costs Php 35.00?
. . . ~ . ;
.
"x8" @
∴ , .

Potrebbero piacerti anche