Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
RIAN PERTAH
TE
EN
AN
KEM
PT Industri Telekomunikasi Indonesia (Persero)
AN
Control & defense
Navigation & Telecommunication
Railway Transportation
Renewable Energy
MINISTRY OF DEFENCE
E-mail : military@pindad.com; DIRGANTARA INDONESIA
INDONESIAN AEROSPACE (IAe)
Praise the Lord for the blessing and grand. The Directorate General for Defence Facilities,
Content Ministry of Defence of the Republic of Indonesia has compiled the latest Defence Industry
Explosives Services For
General Mining catalogue. This Catalogue is one of the activities of the Indonesian Defence Industries which
Quarry And Construction 3 MINISTRY OF DEFENCE OF THE REPUBLIC OF INDONESIA IN BRIEF |
Oil And Gas provides a well-arranged summary of possibilities and offers of companies associated with
4 COMPANY ADDRESS | defence industries.
5 PT . PINDAD ( PERSERO ) |
PT. DOK & PERKAPALAN KODJABAHARI
( PERSERO ) Defence Industry has a strategic role in organizing the Defence, so that should be encouraged
13 PT . PAL INDONESIA ( PERSERO ) | Head Office :
Jl. Sindang Laut No 101, Cilincing, Jakarta 14110, Indonesia
and nurtured to be able to address the needs of defence equipment to support the Country’s
Telp. (+62-21) 4302228, 4302232
Fax. (+62-21) 4303039, 4303059 website: http://www.dokkodjabahari.com
37 PT . LEN INDUSTRI ( PERSERO ) | stakeholders of the Defence Industries, namely the Government, Industry and Users.
85 PT . INFOGLOBAL |
Finally, I hope that this catalogue will be a good source of information particularly the Defence
91 PT . INFRA RSCS | Industry development as well as the introduction of defence equipment products which have
95 PT . CMI | obtained certification from the Ministry of Defence of the Republic of Indonesia and will be
able to provide maximum benefit to society in the development of defense industries in order
101 PT . INTERNASIONAL MIRATECH TRADINDO|
to improve National Defence.
104 PT . INDOPOLLY |
Jakarta, December 2010
Jl. Bendungan Sempor Kav.12-18
Malang 65145 - Jawa Timur - Indonesia
Telp / Fax : +62 341 551408
e-mail : saribahari@indo.net.id
w w w . s a r i b a h a r i . c o m
4 Defense Industry Products Catalogue Jalan Soekarno Hatta 631, Bandung 40285, Indonesia | Phone: +62 22 731 1133 | Fax: +62 22 731 1111
www.cmiteknologi.com
PT. INTERNATIONAL MIRATECH TRADINDO Defense Industry Products Catalogue 5
COMPANY ADDRESS
Jl. Tanah Abang II No. 27, Jakarta 10160 Tel: 0778-430668 Fax: 0778-430667
Telp : (62 - 21) 384 6833 (Hunting) Shipyard : Kav 20 Sei Lekop, Sagulung, Tanjung Uncang,
Fax : (62 - 21) 384 3717 Batam, Indonesia
Email : paljkt@pal.co.id SARI BAHARI
Web Site : http//www.pal.co.id Office Address
Jl. Bendungan Sempor Kav. 12-18
PT. Dirgantara Indonesia Malang 65145 – Jawa Timur – Indonesia
Address : Jln. Pajaran 154, Phone / Fax: 62 – 341 - 551408
Bandung – Indonesia Workshop: Jl. Muharto 125 Malang
Phone : 62.22. .605 4137
Facsimile: 62.22. .6031903
DIRGANTARA INDONESIA
INDONESIAN AEROSPACE (IAe)
Email : Sales-Marketing-Ai@Indonesian- PT. INFOGLOBAL
Aerospace.Com Jl.Sriwijaya 36, Surabaya, Indonesia 60265
Telp : +62 31 5661802; 5661803
PT. LEN INDUSTRI (PERSERO) Fax : +62 21 5661990
Soekarno-Hatta no. 442 Bandung 40254 Indonesia Gedung PPHUI Lt.3 Jl.HR. Rasuna Said Kav. C-22 Jakarta,
Tell (62 - 22) 5202682 Indonesia12940 Telp : +62 21 5278837 Fax : 62 21 5278838
Fax (62 - 022) 5202695
Email : marketing@len.co.id
Home Page http://www.len.co.id I N D O N E S I A
PT. INFRA RCS INDONESIA
PT . INTI Graha Pratama, 19th Floor
Kantor Pusat / Head Office Jln. MT Haryono Kav 15, Jakarta 12810
PT. Industri Telekomunikasi Indonesia (INTI) Telephone: +62 21 8370 9617, Facsimile: +62 21 8379 3622
Jl. Mohamad Toha No.77 Bandung, 40253
West Java, Indonesia
Phone: 022.5201501 Fax. 022.5202444
www.inti.co.id
CMI TEKNOLOGI
Jalan Soekarno Hatta 631, Bandung 40285, Indonesia |
Phone: +62 22 731 1133 | Fax: +62 22 731 1111
www.cmiteknologi.com
PT . INTERNASIONAL MIRATECH TRADINDO
PT. DAHANA (PERSERO) Bandar Halim Perdana Kusuma Lt.II No. 60
Head Office & Factory Jaktim 13610
Jl. Letkol Basir Surya PO. Box 117 Tasikmalaya 46196 Telp/ Fax : 02180878685.
Telephone : +62 265 331 853
Facsimile : +62 265 334 114 PT. INTERNATIONAL MIRATECH TRADINDO
Jakarta Office CV. INDOPULLEY PERKASA
Menara MTH 17th floor Jl. MT Haryono Kav. 23 Sidamukti Rt 01/08 No.75,
Jakarta 12820 Sukamaju, Sukmajaya, Depok Timur,
Telephone : +62 21 837 823 17
Jakarta - Indonesia
Facsimile : +62 21 837 823 37
www. dahana.com Telp/Fax +62 21 770 9116
corporate@dahana.com e-mail : indopullyp@gmail.com
PINDAD PISTOL PINDAD CODE PM2-V1 SNIPER RIFLE PINDAD CODE SPR-2 & PINDAD CODE SPR-3
USE:
The Pistol Calibre 9x19 mm Luger or any other synonyms,
Parabellum, Browning GP35, Beretta 92, SIG P225 and so
on in similar calibre
USE:
The weapon calibre 12.7 x 99 mm, Browning M2, M2HB
Machine Guns, M85 Machine Gun and so on in similar
calibre.
MORTAR GRENADE
USE:
Suitably chambered revolver calibre 0.38 Special and so
on in similar calibre.
3. CASE
•Length : 30.00 mm.
•Material : Brass 72 (Cuzn 28).
•Type : Rimless, Bottleneck and Centerfire
4. PRIMER
•Type : Non Corrosive, Non Mercuric. PINDAD CODE Mo-3 81 mm SB
MORTAR
5. PROPELLANT : Smokeless powder.
6. CHARACTERISTIC
•Sound level : Min. 90.db
The Mo 3 PINDAD is a medium mortar designed use for
•Safety : None of catridges fired can pierce an
approx 0.10 mm thick paper target at 5
infantry units. As with 81 mm mortar, the design aloes 360
m distance from muzzle. traverse and, although the weapon has been lightened
7. PACKING as much as possible, all the usual controls are include.
TECHNICAL DATA •1 Plastic Rack : 50 rounds. The elevating, traversing and leveling mechanism, the
1.USE : •1 Carton Box : 50 rounds (1 Plastic Rack ) double shock-absorbers and the sight are mounted on
The pistol calibre 9x19 mm luger or any other synonym, •1 PVC Bag : 500 ronds (10 Carton Boxes )
Parabellum, Browsing GP35,Beretta 92 , SIG P225 and so on
the bipod assembly. An adaptation of this mortar for
•Two Packaging methods in the Boxes :
similar calibre. a.Wooden Box
firing from light vehicles was studied and produced in
2. CARTRIDGE 1 Box : 2.500 rounds (5 PVC Bags). prototype form, but is not yet in production. Used for the
• Weight : 5.00 g. b.Plastic Box. Indonesian army.
• Rim Thickness : 1.25 g. 1 Box : 3.000 rounds
• Extractor Diameter : 8.80 g. (6 PVC Bags in Alluminium Foil bag).
and general engineering indsutry facilities like power the mastery of design and construction, supported by
plant, onshore / professional of human resources, a modern shipyard
offshore drilling rig and oil & gas processing industries facilities and good management
3. General Engineering activities up to engineering,
procurement, installation and construction (EPIC) level PT. PAL Indonesia (Persero) has a reliable human
activities for power plant industry & equipments, oil & resources in design engineering and construction, who
gas industry processing facilities and manufacture of are experts in the field:
other industry components like pressure vessel, heat • Hull Construction;
exchanger, oil cooler etc • Machinery & Electrical Outfitting;
• Electronic & Control;
C. Accreditation of Production Management • Combat Systems;
Direktur PT.Pal Indonesia Dewan Komisaris PT.Pal Indonesia Their are had been trained in Germany (Lurssen, Blohm
The production process of PT PAL Indonesia (Persero) & Voss, Meyer Werft), Belgium (BSC), Japan (MES),
FLASH INFO based on the standardization of quality, safety and Netherlands (Signaal / Thales, Schelde).
occupational health and environmental pollution • PT.PAL Indonesia (Persero) has sophisticated design
PT PAL Indonesia (Persero) is Indonesia State Own colonial governance of Japan. Japanese surrender as defined by national or international credible tool called “TRIBON Software” (Sweden) a new
Company which is engaged in the shipbuilding and Indonesia proclaimed its independence. The institutions. In 1994, PT PAL Indonesia (Persero) has developed technology design software.
industry and General Engineering, located at Ujung Dutch regained control of the “Marine Establishment” obtained ISO 9001 Certificate in the field of production Tribon software is a CADCAM software that integrates
Surabaya • 1949 : Colonial governance of Dutch returning the management, ISO 14001 certificate of environmental the result in basic design, production drawings to
“Marine Establishment” to Indonesia Government management systems, ISO 18001 Certificate for OHSAS fabrication by displaying the size of vessels in 2D and
A. History which is then handed over to the Navy and named (Occupation of Health & Safety Assessment Series) and 3D shapes.
Naval in the field of non-vessel it has obtained ASME STAMP
The establishment of PT PAL Indonesia started from a • PT. PAL Indonesia (Persero) in cooperation
Command (Komando TNI-AL “KONTAL”) this place is certificate for pressure vessel
shipyard that serves as a facility for ship maintenance Hydrodynamic Laboratory - BPPT to test the model
also assigned as the Navy base
and repair named Marine Establishment (ME), which of the ship design engineering results before starting
• 1978 : Changing the status become public company D. Capabilities and Production Facilities
was founded by the Dutch colonial government production to know the level of accuracy and measure
named Perum PenataranAngkatan Laut “PAL”
in 1939. During the Japanese occupation, even the speed of the ship Until now, PT PAL Indonesia has
• 1980: Government Regulation No. 4 of 1980 changed PAL INDONESIA has experience for more than 27 years,
thiscompany switched its name to Kaigun SE21-24 produced more than 220 ships of various sizes from
the status of the company became a Limited Liability in the design and construction of various types of
Butai with the same functionality. After independence, small to large sized vessels 210 meters with 50.000
Company (PT) named PT.PAL Indonesia (Persero), merchant ships, warships, ship repair & maintenance as
the Government of Indonesia used to support the DWT deadweight, and began from simple ship to
according to Hadi Moentoro SH deed, by raising Prof. well as nonship products.
implementation of the sophisticated ship such as fast patrol boats, landing
DR.Baharuddin Jusuf Habibie as president director. Reliability of the shipbuilding industry is seen from
maintenance of the navy ships . Looking at the market patform dock, AHTS (anchor handling tug service),
• 15 April 1985 : PT.PAL Indonesia inaugurated by
and technology developments that occurred, on April Design Engineering in Shipbuilding Field : tug escorts, and chemical tankers.
President Soeharto
15, 1980, the government changed the status of the • 1989 - 2002 : PT PAL Indonesia become Strategic
company became a Limited Liability Company (PT) in Industry of Indonesia State Own Company under
accordance with notary deed No.12 of HadiMoentoro, the guidance of Agency of Industrial Development
SH and also become State-Owned Company Strategic Strategy called BPIS
Industries, with 100% ownership of the Government of • 2002 – present : PT PAL Indonesia is under the
Indonesia. guidance of State Own Company
Ministry
Company histories in detail :
• 1822 : Governor General Indies Dutch, VD Capellen B. Line of Business :
intend development of repair workshop and repair of
Dutch Navy ship in Indonesia his colony Main business PT PAL Indonesia ( Persero) currently are :
• 1849 - 1939: In Ujung Surabaya, founded repair 1. Construction of new vessels include war ships up to
workshop and maintenance for Dutch navy ship class Frigate and merchant ships up to 50,000 DWT.
named “Marine Establishment”. The Company was 2. Maintenance and repair of merchant ship, war
renamed Kaigun SE 2124 Butai while under the ship up to the depo level, overhaul of submarine
D.1. Capabilities and Production Facilities of Warship D.2. Capabilities and Production Facilities of Merchant Ship:
With the ability in the field of engineering design, With the ability in the field of design engineering, support
support by modern facilities and most up to date by modern facilities and most up to date production
production technology, and appropriate tasks assigned technology, PT PAL Indonesia (Persero) has experience
by the government of Indonesia through the Ministry of building ships bulk carriers up to 50,000 DWT, Passenger
Defense, Police, Ministry of Finance, Ministry of Research Ship 500 pax, Tankers up to 30 000 LTDW, Container Ship
& Technology, BPPT and LIPI, PT PAL Indonesia (Persero) up to 1600 TEU, Tug 3200 HP , Fish Ship up to 320 GT
has been producing various types of warships and others etc.
fast special boat including: Landing Platform Dock 125m,
Fast Patrol Boat 57 meters (KPC 57 M), 38-meter Fast It has a modern production facilities, which consists of:
Patrol Boat (KPC 38 M), 38-meter Fast Patrol Boat (KPC • Graving Dock with a capacity of 50,000 DWT;
38 M) and Fast Patrol Boat 14 meters (KPC 14m). Besides, • Side launching facility;
it has developed designs for the national corvette ship • Conveyor Transport System facilities;
1,300 tons and 1,500 tons, including design of the Mine • Goliat Crane with capacity of 300 ton;
Hunter Ship 600 tons which is the result of cooperation • Level Lauffing Crane capacity of 20 and 40 Ton;
of government agencies and related national industries. • Main workshop and other supporting workshops
Warship has modern production facilities consist of the
main workshop, other supporting workshops and also
supported shiplift transfer facility with a capacity of 1500
TLC enabled to build 4 (four) units per year ship tonnage
of 400 tons displacement and 5 (ship) units per year
aluminum boat with a size of 38 meters.
D.3. Capabilities and Facilities of Ship Maintenance • Graving dock with a capacity of 20 000 DWT;
and Repair : • 1 (one) unit Floating Dock with a capacity of 1000
PT PAL Indonesia (Persero) not only carry out maintenance TLC;
and repair of the merchant ship and war ship experienced, • 1 (one) unit Floating Dock with a capacity of 1500
but also have experience implementing a national TLC;
submarine overhauls. • 2 (two) units of Floating Dock with a capacity of 5000
Ship maintenance and repair has modern facilities TLC;
consists of: • Machinery, electrical, electronics and weaponry
workshops.
E. Participation PT PAL Indonesia (Persero) In Support (Persero) has performed its role to support the
of Alutsista (the main equipment of weapons systems) independence of the availability of Alutsista (the main
E.2. SHIPS REPAIR AND MAINTENANCE
of National Defense and Security equipment of weapons systems) for national defense,
especially in the development, construction, and
As stated in Article 3 paragraph 1 of the Deed of maintenance & repair warships.
Establishment of PT. PAL Indonesia that aims and
objectives of the Company to implement and support It may be evidenced by some Alutsista products that
government policies and programs in economics and have been and will be produced and the development of
national development, since the specified change in products by PT. PAL Indonesia (Persero)
status to a limited company in 1980, PT. PAL Indonesia
E.3. Transformation of Technology and Product always put forward the process of transfer of technology
Development: and adequate use of local components
In supporting the Government prepare a plan of defense E.3.1 Stages of Transfer of Technology in Product
equipment specially for navy PT PAL Indonesia has Design Engineering
REPOWERING Parchim MDP 60 M With the ability to design and construction that are owned, PT. PAL Indonesia has implemented the transfer
Order: Coast Guard – Ministry of Transportation of technology to support the independence of alutsista (the main equipment of weapons systems) industries
defense and security of NKRI
Defence Minister, Shipbuilding Launching of First theme “Persembahan Anak Bangsa Untuk Bumi Persada
Indonesia PKR Indonesia”, symbolically by the opening of the sheath
Defence Minister Purnomo Yusgiantoro to launch the mock-up combat PKR warships by the Defence Minister.
construction of warships combat type Escort Missile It was attended by Panglima TNI Jend. Djoko Santoso,
Destroyer (PKR) which is the first combat warships and Kasal Laksama Agus Suhartono, Deputy Defense Minister
largest to be made in Indonesia, on Monday (8/16/2010) Lieut.Gen. Sjafri Sjamsoeddin, General Secretary of
at the Defense Ministry’s office, Jakarta. PKR warships Defence Ministry Marsdya Eris Haryyanto, S. IP, MA and the
will be build by PT. PAL as the domestic defense industry President Director of PT. PAL Harsusanto and a number of
cooperation with other countries, as the winning bidder. officers in Ministry of Defense, TNI Headquarters and TNI-
Launching the construction of PKR warships with the AL Headquarters.
F. CONCLUSION
We hope to support the development of future defense
industry and also in enhancing the ability of the
Indonesian people, especially domestic industry, then
it can presumably PT PAL Indonesia has always been
given a large enough role in participating to prepare
the Alutsista (the main equipment of weapons systems)
necessary, especially in the TNI-AL demand.
DIRGANTARA INDONESIA
INDONESIAN AEROSPACE (IAe)
PT . DIRGANTARA INDONESIA (PERSERO) PT . DIRGANTARA INDONESIA (PERSERO)
1.5 ENGINE REPAIR & OVERHAUL CAPABILITIES 1.6 MANUFACTURING OF DEFENCE PRODUCTS MILITARY PRODUCT
The Engine Overhaul Facilities has been certified by the following Authorities:
• DGCA of Indonesia (145/1990) 1.6 MANUFACTURING OF MILITARY PRODUCTS
• FAA (Federal Aviation Administration) of USA (NZQY006J & PC-107)
• ATO (Air Transportation Office) of Philippines (152-F) “RUTAVs” Rajawali Unmanned Aerial Vehicle
• DGAC of Royal Oman (AWR/AMO/IPTN-077/94) Reconnaissance, Surveillance, Target Acquisition
• DCA of Malaysia
SHAPED CHARGES
SURFACE SHIP Military Explosive Technology can be applicable
• SUT TORPEDO ON KRI AJAK for cutting of offshore Oil Platform
• SUT TORPEDO ON KRI SINGA
• SUT TORPEDO ON KRI KI HAJAR DEWANTARA
SATCOM
Maritime Surveillance
Anti-Surface-Unit Warfare GPS
ENGINE OVERHAUL :
PT. DI - GE (USA) CT-7, GT8D
PT. DI - GARRET (USA) TPE-331
PT. DI - TURBOMECA (FRANCE) MAKILA 1A, TURMO IV C
PT. DI - ALLISON (USA) N-250
PT. DI - P & W (CANADA) PT-6
PT. DI - ROLLS ROYCE (U K) DART - 7, SPEY
PT. DI - LYCOMING (USA) LTS-101
OTHERS :
PT. DI - MHB (FRANCE) LANDING GEAR CN-235 OVERHAUL
PT. DI - COLLINS (USA) AVIONIC SHOP
PT. DI - NDO (JAPAN) COMPUTER SYSTEM/SOFTWARE
PT. DI - NLR (HOLLAND) FATIGUE LOAD MONITORING
PT. DI - MHI (JAPAN) AERODYNAMIC
PT. DI - TU-DELFT (HOLLAND) MATERIAL ARALL
PT. DI - HASI (USA) - DASA (GERMANY) SPACE TECHNOLOGY DEVELOPMENT
PT. DI - FIAS (FRANCE) TRAINING FACILITIES
TUDM (MALAYSIA) TUDB (BRUNEI DARUSALAM PAKISTAN AIR FORCE
6 UNIT MILITARY TRANSPORT 1 UNIT VVIP TRANSPORT 3 UNIT MILITARY TRANSPORT
2 UNIT VVIP TRANSPORT 1 UNIT VIP TRANSPORT
IV. WORLD CLASS QUALITY SYSTEM
CERTIFICATE
DQS GmbH
Deutsche Gesellschaft zur Zertifizierung von Managementsystemen
UNI ARAB EMIRATES (UAE) ROYAL KOREAN AIR FORCE THAILAND (MOAC) DIRGANTARA INDONESIA
INDONESIAN AEROSPACE (IAe)
Bandung 40174,
Indonesia.
4 UNIT COAST GUARD Through an audit, performed in compliance with EN9104, dated 04/2006 (equivalent to
AS/JISQ 9104), it was verified that the management system fulfills the requirements
of the following technically equivalent standards:
EN 9100 : 2003
Aerospace - Quality Management Systems - Requirements
AS 9100, Rev. B, JISQ 9100 : 2004
SPECEFICATION
• Collimeted Projection
• Field of view : 220 deg Horizontal
60 deg Vertical
• Collimeted display : 5 Channel upper
2 Channel lower
• 6 D.O.F Axis Motion System
Control & defense
• Load Control System
• Instructur Operator Console (IOS) Navigation & Telecommunication
Railway Transportation
• Recordingand Replaying System
• Tatical Area Simulation
• Weather Radar Simulation
• Sound Simulation Renewable Energy
Quality is never an accident, it is always the result of its products and services are to consistently develop
high intention, sincere efforts, intelligent direction and implement quality management system based on
and skillful execution, it represents the wise choice of ISO 9001:2000. In addition, Len also has a laboratory
many alternatives. for calibration, which has been accredited by the
Committee of National Accreditation (KAN).
Len is responsible to ensure that Len’s products/
services can be fully implemented by the customers In the framework of customer satisfaction services, Len
in the field, during installation, warranty, use, and has the following main policies:
operation. • Flexibility in solution
• Reliability of products and services ENERGY TRANSPORTATION
Len also makes sure that all of the equipments • Cost control Products : Products :
have been installed properly in time and have the • Care to punctuality • Solar Home System • Len Interlocking System
• Solar Diesel Hybrid Power System • Centralized traffic Control
specification conform to the contract. The direct Len makes serious efforts to comprehend the
• Prepaid Kwh Meter • Automatic Warning System
support from the best experts in Len will be available customers’ needs and help them consistently and • Solar Street Lamp • Level Crossing
any time it is needed. continually during the projects carried out. Len is able • Solar Satellite Phone • LED Signal Lamp
to provide a consistent, effective, and comprehensive NAVIGATION & TELECOMMUNICATION • Traction Motor Control
The methods Len uses to give quality assurance of service toward customers satisfaction (Customer Total Products : • Auxiliary Power Supply
Solution) • Navigation System • Electrical Control Panel
• Radar CONTROL & DEFENSE
• DVB -T Transmitter Products :
MAIN BUSINESS • WiMAX • Communication Equipment
• Antenna System • Sensor Weapon & Command (SEWACO)
• Detection Equipment System
• Asset Monitoring & Tracking System
Products of Len have been widely used throughout activities at night with the help of SHS light and Hybrid
Indonesia and people of this country can directly feel Power System. Len’s Hybrid Power System has also
the benefit of these products. The social added value been used as power generating system in operating
provided by Len are among others. light houses at various Indonesia’s borders.
PT. Len Industri (Persero), commonly known as Len, • System Integration
is an industrial electronic and infrastructure industry • SERVICES Safety and Comfort for Train Passengers Window to Information and Communication
which operates in lines of transportation, information • Procurement Len’s Interlocking System (SIL-01 and SIL-02), which are People at the borders, in remote areas, and blank spot
& defense, and energy. Len’s activities include : • Installation installed in various railway stations in this country are areas can enjoy the local/national TV programs since
• PRODUCT DEVELOPMENT • COMMISSIONING capable of handling the railway traffics. The automatic Len’s TV transmitters have been built in those areas.
• MANUFACTURING • Testing Warning System (AWAS) and the level crossing, which They can also enjoy the communication through solar
• SYSTEM SOLUTION are built at railway crosses, have significantly reduced (energy) satellite telecommunication kiosks. For those
• System Design the number of railway accidents at the crossing. who need accurate information on weather forecast, Len
• Engineering has launched a products of Weather Radar & Radiosonde,
a device for sending weather perimeter to BMG (the
Electricity for remote villages Agency for Meteorology and Geophysic) to be processed.
More than 150,000 of solar energybased products
of Len have supplied electricity to the villages which
are far beyond the reach of PLN. People can do their
PRODUCTION FACILITY
Partnership and Community Development (PKBL) Industrial Safety and Health Committee (P2K3)
PT Industri Telekomunikasi Indonesia (Persero)
Apart from earning profit for the shareholders, With the intention of supporting the effort in
the company makes use of part of its profit for the preventing and controlling work accidents,work
community as its social responsibility. illnesses, environmental pollution, and production
The company participates in the improvement of equipment security, Len sets functional P2K3
social economy development by creating self reliant, (Industrial Safety and Health Committee).
strong, and efficient small scale business.
This program is attempted by allocating a part of
the company’s profit and distributing it through the
State Owned Enterprise Partnership Program with the
small scale business and environment development
program (PKBL)
L en’s Subsidiaries
• PT Eltran Indonesia
• Telecommunication & Signaling Contractor
• PT Interlokindo Utama
•Transportation Infrastructure
• Engineering Consulting Kantor Pusat / Head Office
PT. Industri Telekomunikasi Indonesia (INTI)
Jl. Mohamad Toha No.77 Bandung, 40253
Defense Industry Products Catalogue 47
West Java, Indonesia
Phone: 022.5201501 Fax. 022.5202444
www.inti.co.id
PT . INDUSTRI TELEKOMUNIKASI INDONESIA (PERSERO) PT . INDUSTRI TELEKOMUNIKASI INDONESIA (PERSERO)
synchronizer transistor
Y
Power supply Antenna
video
Y
Display unit Receiver
antena control
Block Diagram of FM-CW Radar System
Transmitter :
Considerations
• Microstrip antennas are low-cost
Explosives Services For
• Frequency : X band (around 9 GHz)
• Frequency sweep : 2 MHz, 4 MHz, 8 Mhz, 16 MHz,
• Microstrip antennas are leight-weight ; this minimizes
construction cost of antenna support General Mining
Quarry And Construction
32 MHz, 64 MHz • Implementation of modular microstrip patch arrays
• Selected range : 64 Km, 32 Km, 16 Km, 8 Km, 4 Km, antennas in FMCW radar have not been found in the
2 Km. the maximum radar range is set to be 64 literature and thus offsers a possibility of novelly
Km, larger than 27 km, (the predetermined
distance from the radar to the horizon)
BENEFIT Oil And Gas
• Designed to meet Indonesian geographical
To give a possibility for detecting tall ship located
requirements
server several kilometers beyond the horizon
• Design to meet low cost civil type radar requirements
• Sweep repetition frequency : 1000 Hz
that suits for mass implementation
• Output server : 5 watt
• Easy to install, operate and maintenance
Receiver/ processor :
Product Road Map
• If bandwhidth : 512 KHz
• Radar Beach Supervisor : 2010
• Number of range cells : 512
• Radar Military Application : 2010-2011
• Range cells : 125 meter, 62 meter, 31 meter, 16
• Mobile Radar : 2010-2011
meter, 8 meter, 4 meter
• Radar Air Supervisor : 2010-2011
• PC- bassed processor
• Radar Remote Sensing : 2012-2014
• Standard PC display
• Radar Network : 2012-2014
Antenna : • Weather Radar : > 2015
• Microstrip patch arrays antenna with rectangular • New Generation Radar : > 2015
patch elements
MAIN PRODUCT
Emulsion Explosives
Detonators
SaBANG
PRODUCT REFERENCE SHIP BUILDING PRODUCT (EXPORT) PRODUCT REFERENCE SHIP BUILDING PRODUCT (DOMESTIC)
Multi Purpose Roro Vessel 18,900 GT Chemical Tanker 16,000 DWT ADRI XLVII LCU 500 DWT KAL.MERBABU & KAL. MERAPI Tug Boat 1300 HP
Ordered by Raderi Aktieboladget Gotland Ordered by United Tanker AB
Sweden Sweden
KAL.KOMORAN Wooden Laminated Patrol Boat 18 M KRI. LEUSER 924 Ocean Tug Boat 7500 HP
SHIP REPAIR & MAINTENANCE REFURBISHMENT PROJECT OFFSHORE BUSINESS REPAIR MAINTENANCE OFFSHORE STRUCTURE
SPM IMODCO Yoke Arm fabrication OFFSHORE BUSINESS FABRICATION & MANUFACTURING
ordered by MAXUS SES. With 15 M dia. for Mooring (the acessories of SPM IMODCO)
Storage Oil Barge up to 350.000 DWT.
“Lowell“ Jack-up Drilling Mobilization of FSO Barge Cinta Natomas from MAXUS
Under Maintenance & Docking Repair SES to PT. DKB for repair & modification on
CERTIFICATE
CATAMARAN MODELS
CATAMARAN MODELS
MODELS
CATAMARAN
CATAMARAN MODELS
CATAMARAN MODELS
SPECIFICATION
GENERAL SPECIFICATIONX2K Length Over All : 62.53 meter
LOA : 11.10 meter Fuel Capacity : 660 Liter MouldedLength : 60.77 meter
BEAM : 2.92 meter Fuel Tank : SUS 316 (CE tested) Length of Waterline : 60.77 meter
BEAM OF HULL : 2.32 meter Weight Dry Including : 2350 kg Beam Overall : 16 meter
TUBE DIA : 56 cm Engines Water Draft (mid load) : 1.17 meter
SPEED 2 x 300HP : 56 knots (lightship) Carrying Capacity : 14 persons Air Draft : 18.7 meter to Top of The Mast Structure
RIB : Hypalon MaksimumPermissible Deadweight : 53.1 tonnes
RIB Compartment : 9 with Automatic Cruise Speed : 16 knots
Pressure Valves Sprint Speed : 30 knots (mid load condition)
Fuel Capacity : 30.000 litres(full load condition)
Extra Fuel Capacity : 20.000 litres(additional to full loaded condition)
Fresh Water : 5.000 litres
Main Engines : 4 x Marine Diesel Engine MAN
SPECIFICATIONX2K SPECIAL FORCES RIB
Transmissions : 4 x Gearbox, ZF 3055 with nominal 1.828 : 1
reduction ratio
Propulsion : 4 x WaterjetMJP 550 QD CSU
AuxilliaryEngines : 3 x Caterpillar C4.4 (generator set)
86 eKW380 V 1500rpm 50Hz
COMPOSITE ADVANTAGES
• Lighter, stronger, and more shock resistant structure
• Low displacement and draught
• Reduced engine size and fuel consumption, or higher
speed
• Reduced radar, infra red, magnetic, and acoustic
signatures
X2K SPECIAL OPS RIB • Improved insulation properties and lower
LOA : 11.10 meter Fuel Capacity : 660 Liter maintenance costs
BEAM : 2.92 meter Fuel Tank : SUS 316 (CE tested)
BEAM OF HULL : 2.32 meter Weight Dry Including : 2350 kg RESEARCH AND DEVELOPMENT
TUBE DIA : 56 cm Engines SimulationNorth Sea Boats R&D together with
SPEED 2 x 300HP : 56 knots (lightship) Carrying Capacity : 10 persons DislitbangalTNI AL evaluated different new hull shapes
RIB : Hypalon and Construction technique. Computer simulations,
RIB Compartment : 9 with Automatic International Test Tank and sea going scale model was
Pressure Valves use to evaluated best patrol boats design
SHIPYARD
SUPER STRUCTURE
CURRENT PRODUCTION
Looking from the sea and looks over the Dock PT. Palindo in Tanjung Pinang
GPS GPS
GPS
At the beginning of 2003, the second with the name
GPS
of the Shipyard PT. Palindo Marine built on the island
of Batam in occupies a land area of 7 ha. Piers are
both used for the development of ships made from
aluminum and steel.
PC-40 TNI AL
GPS
74 Defense Industry Products Catalogue Defense Industry Products Catalogue 75
PT. PALINDO MARINE PT . PALINDO MARINE
GPS
GPS
SHIPYARD FACILITIES
ALUMINIUM BOATS
GPS
SPECIFICATION
Owner : Kay Zhou Shipping Capacity : 265 passengers
CNC Machine Crane Genset Pte. Ltd Displacement : 90.00 ton
Type : Passengers Ferry Fuel cap. : 20.00 ton
Loa : 38.00 meter Fresh Water cap. : 2.00 ton
ALUMINIUM BOATS B : 7.40 meter Speed Maks : 32.00 knot
Height : 2.60 meter Main engine : 3 x CAT C32 @1300 HP
GPS
SPECIFICATION SPECIFICATION
GPS
GPS
Owner : Badan SAR Nasional Fuel cap. : 45.00 ton Owner : SembMarine Pte. Ltd Cargo : 53 ton
Type : Rescue Boat Fresh Water cap. : 8.00 ton Type : Crew Boat Displacement : 90.00 ton
Loa : 40.00 meter Speed Maks : 30.00 knot Loa : 40.00 meter Fuel cap. : 20.00 ton
B : 7.50 meter Main engine : 3 x MAN D2842 LE418 @1250 HP B : 7.40 meter Fresh Water cap. : 2.00 ton
Height : 3.65 meter Height : 2.60 meter Speed Maks : 32.00 knot
Capacity : 26 Person Capacity : 100 passengers Main engine : 3 x CAT E32 @1500 HP
KCR 40
• Material Hull : High Tensile Steel AH-36 & Marine Steel Grade-A
• The Building Material : Aluminium Alloy 5083 H116 / 321
• The shape of the hull Design : Deep V Semi Displacement Planing Monohull
• Type of Ship : Kapal Cepat Rudal
• LOA (Length Over All) : 43.0 meter
• B (Breadth) : 7.4 meter
• H (Height) : 3.4 meter
• T (Draught) desain, full load :1.65 meter
• Displacement design, full load : + 230 ton
• Main Engine : 3 x @1800hp MAN V12-1800 (Germany)
• Diesel Generator set (Aux. Engine) : 2 x 140kVA
• Maximum Speed : 27 knots at 85%MCR pada sarat air = 1,65m
• Distance Cruising speed 27.27 knots (Engine RPM 2300) : 1215 nautical miles , 44.56 jam
speed 25.32 knots (Engine RPM 1800) : 2163 nautical miles , 85.43 jam
speed 21.61 knots (Engine RPM 1300) : 4057 nautical miles , 187.75 jam
• Fuel Capacity : 50.000 Liter
• Fresh Water : 15.000 Liter
• Propultion Syatem : Longsahft SS 316, Propeler 4 daun, dia. 47”
• Acomodationi : 35 Crew + 8 Paska Jl. Bendungan Sempor Kav.12-18
Malang 65145 - Jawa Timur - Indonesia
78 Defense Industry Products Catalogue Telp / Fax : +62 341 551408
e-mail : saribahari@indo.net.id
w w w . s a r i b a h a r i . c o m
PT . SARI BAHARI PT . SARI BAHARI
PRODUCTS PRODUCTS
PRODUCTS
PRODUCTS
TAIL
• Printing Tail Cone
• Printing Tail Fin
• Welding
• Painting
• QC
SUSLUG
• Tera Process On Print
NO DESCRIPTION VALUE
• Manufacturing Suslug
1. Total Length 1100 mm • Manufacturing Suslug Drat
2. Total Weight 100 – 125 KG • Laboratorium Testing Random Sampling
3. Diameter 273 mm • Painting
PACKING :
4. Material • QC
2 unit Bombs in wood packing :
Lenght : 1200 mm A. Body Bomb Nodular Steel SUSLUG COVER
width : 600 mm B. Suspention lug VCN 45 Steel • Tera Process On Print
Height : 400 mm
C. Fin ST – 37 Steel • Manufacturing Suslug Cover
Product capacity : ± 200 Ea / month 5. Smoke Signal Content TiCl2 - PA Grade • Manufacturing Suslug Cover Drat
User : MABES TNI – MABES AU 6. Fin Length 550 mm • Painting
• QC
NO DESCRIPTION VALUE
1. Total Length 1100 mm
2. Total Weight 100 – 125 KG
3. Diameter 273 mm
4. Material
A. Body Bomb Steel Formulation
B. Suspention lug VCN 45 Steel
C. Fin ST – 37 Steel
5. Explosive Content - Commercial Explosive ( By DAHANA )
- Military Explosive ( By PINDAD )
6. Fin Length 550 mm
Casing Nose
• Manufacturing Print • Cutting AS Material
• Tera Process On Print • Codering
• Homogeneity • Bor / Hobing CASING BOMB P- 100 L ( LIVE) PRODUCTION PROCESS
• Lacting • Painting
• Drill + Top / Suslug Part • QC
• Painting
• QC
21 BOMBs P -100
DROPPED
9 BOMBs P -100
6 BOMBs P -100
TDAS SEAMON
TDAS is an air situation monitoring information system SEAMON is a surveillance system for marine situation
that integrates air radar catches both civilian and military which involving some sensing equipments installed in a
radar, in a form of moving objects especially any aircraft certain area, either as permanent equipment on shore or
that pass in a region. The data will be processed and sent moving object on the ship, supported with applications
to a map-based display system that is online to show software. The captured data can be viewed locally in
aircraft movement in real time. places where the equipment is installed ortransmitted to
other places, such as an command center, for integration
Integration of these radar data with other data such as and remote monitoring.
Flight Clearance allows any aircraft can be identified as
illegal or legal aircraft that infiltrated into the airspace of The sensing equipments that in used are such as Surface
a country. The data could be used as a basic information Radar, Automatic Identification System (AIS), and
for blocking maneuvers and air security. Long Range Camera. Data from the equipments were
acquired and then processed into a specific data format.
These formatted data then are transmitted to a certain
destination and then displayed to a map-based display
system.
Optimax Radar Active Splitter is an electronic device RDU ( Radar Dispaly Unit ) is a line replaceable unit
used to split output of radar data both in active and (LRU) to display information to pilot regarding the catch
passive using synchronous transfer mode RS 232. Output of radar data in fighter aircraft, target tracking and
one radar can be monitored by many users or further intercept, data elevation, slope and others on the Hawk
processed by many devices that need the radar data. It 100/200 aircraft type or F5.
use DB 25 connector. Benefit :
RDU has been implemented in :
• Add channel of output radar data. • Squadron 1 Supadio Pontianak, Indonesian Air Force
• Compatible with Civil and Military Radar. • Pekanbaru, Indonesian Air Force
• The output of radar data splitting is stable and reliable
without any loss of data.
• Casing size is designed base on Rackmount standard.
• Available in 1-channel, 2-channel and 16-channel
type.
CONTROL DISPLAY UNIT DEFENSE PRODUCT
Optimax Radar Receiver is a radar data filter and
converter which is able to receive radar data formats and Control Display Unit (CDU) is used to display aircraft
transmit it based on TCP/IP base. navigation data provided by INU (Inertial navigation Unit)
and CADC (Control Air Data Computer). CDU Navigation
Superiority: Data includes e.g.: position, heading, speed, destination
• Compatible with Civil and Military Radar in variety data distance and bearing, wind speed and direction.
format, such as Thomson (Thales), Plessey, PR800,
EV720, EV760, Aircat, NEC, Cardion. CDU can control INU to set the alignment and determine
• Allows common computer to access and display radar the waypointdirection.
data easily.
SOYUS
BANK PARTNERS
VISION MISION
Our vision is to be market leader of a National radar and • To contribute in marketing of National radar
communication system, also supporting revitalisation, • Team up with customer to optimize value
• Bank Mandiri Cabang M.T. Haryono. • Hidros
have a credibility and commitment for national product. • Managing company with honour, dignity and effective
• To give an added values for customers, partner,s
employee and shareholders.
PRODUCT
• Tanda Daftar Perusahaan Perseroan Terbatas (TDP) Number 09.03.1.51.57633 date : 21 December 2009 in Jakarta .
• Surat keterangan Domisili Usaha, Number 2225 / - 1 824 6/IX/2010 date : 24 September 2009 in Jakarta
Features :
• Sertifikat Uji Fungsi, Number : Sket/58/VIII/2009, date : 27 July 2009 in Jakarta. The total score is 95,92 (Very good) • LPI naval surveillance radar
• Solid-state FMCW technology
• 2 Watt transmit power
• ARPA functionality using MATA
• Integrated Electronic chart (ECS/ECDIS)
• Integrated AIS, GPS and Compass
• North-up, head-up, course-up, true motion
• Doppler speed up to 31 kts
PRODUCT
Features :
• Save navigation and easy operation, provides all necessary information
• Information system and decision support, a flow of information for presentation of the crucial navigational
information and objects
• Choice and customization, enable system customization , including multiple operation modes with charts in
several formats
• Sensor integration, connects all available on board navigation data sensors and system
• Savings, direct effects on fuel consumption, voyage times and work
Jalan Soekarno Hatta 631, Bandung 40285, Indonesia | Phone: +62 22 731 1133 | Fax: +62 22 731 1111
www.cmiteknologi.com
CMI TEKNOLOGI CMI TEKNOLOGI
The CM22943-XDx can be used for SCPC, DAMA Phase Noise ( SSB ) : -70 dBc @ 100 Hz
C - BAND UP CONVERTER CM 22943 - XUx SPECIFICATION -83 dBc @ I KHz
and TDMA as well as full transponder HDTV and
-93 dBc @10 KHz
C-Band signal. It incorporates extensive moNtor and analogTVThe CM22943-XDx Down Converter is housed -100 dBc @ 100 KHz
control functions that are accessible from the Ont panel in an enclosure destined for mounting in a standard EIA Group Delay ( with equalizing ): ± 0,03 ns / MHz ( linear )
as well as through a remote RS-232 and RS¬485 bus. 19-inch rack, requiring a 1.75 inch high vertical space. ± 0,005 ns / MHz2 ( Parabolic )
± 0,5 ns (ripple)
CM22943-XDx and CM22943-RDN Redundant Control
Intermodulation : - 50 dBc for two carries at 0 dBm
The CM22943-XUx can be used for SCPC, DAMA and Unit work together in providing N+ I protected Down output
TDMA as well as full transponder HDTV and analog Converter system. AM/ PM Conversion : 0.1deg/dB max. for - 15 dBm
output
TV. The The CM22943-XUx Up Converter is housed in • IF Characteristic Output power (1 dB ) : +15 dBm
an enclosure destined I’or mounting in a standard EIA Input Frequency : 70 ± 20 MHz or 140 ± 40 MHz (-XD4)*
CM22943-XUx is a single rack unit synthested double 19-inch rack, requiring a 1.75 inch high vertical space. Input Impedance : 75 ohm or 50 Ohm (-XDx-50) • Alarm & Indicators : Summary ( Form C contact ),
Input Return Loss : 26 dB (75 Ohm), 20 dB (50 Ohm) LO Unlock, Mute, Local
conversion Extended C-Band Up Converter with phase CM22943-XUx and CM22943-RUN Redundant Control
Connector : BNC/F
noise better than IESS-308/309 standard. The unit Unit work [ogether in providing N + 1 protected Up • Operating Conditons
converts IF signal to 5.8-6.7 GHz C-Band and Extended Converter system. • RIF Characteristic Temperature : 0 to 50 Degrees Celsius
Input Frequency : 3400 to 4200 MHz Humidity : 0 % to 95 % ( non condensing )
• IF Characteristic Group Delay ( with equalizing ): ± 0,03 ns / MHz2 ( linear ) Step size : 125 KHz or I KHz (-XD2) *
Input Frequency : 70 ± 20 MHz or 140 ± 40 MHz (XU4)* ± 0,005 ns / MHz2 ( Parabolic ) Frequency stability : ± I X 10-7/ year * • Monitor : RF LO, IF LO, RF Sample, IF
Input Impedance : 75 ohm or 50 Ohm (-XUx-50)* ± 0,5 ns (ripple) Input Impedance : 50 ohm Sample
Input Return Loss : 26 dB (75 Ohm), 20 dB (50 Ohm) Intermodulation : - 50 dBc for two carries at 0 dBm Input Return Loss : 20 dB
Connector : BNC/F output Connector : N/F • Controlls : user friendly keypad with easy -
AM/ PM Conversion : 0.1deg/dB max. for - 15 dBm to - learn instructions and
• RIF Characteristic output • Transfer Characteristic interactive LCD display Remote
Output Frequency : 5845 to 6725 MHz * Gain : + 15 ~ 45 dB in 0.5 dB or 0.25dBstep * M & C ( RS -232 or RS -485 )
Step size : 125 KHz or I KHz (-XU2) * • Alarm & Indicators : Summary ( Form C contact ), Gain Slope : ± 0,05 dB / MHz max
Frequency stability : ± I X 10-7/ year * LO Unlock, Mute, Local Gain Flatness : ± 0,5 dB in 36MHz or 72 MHz • Primary Power : 180 ~ 260VAC, 47 ~ 63 Hz or 48VDC
Output Impedance : 50 ohm (-XD4) * • Dimension ( D x W x H ) : 23,5’’ x 19’’ x 1,75’’ in
Output Return Loss : 20 dB • Operating Conditons Gain Stability : ± 0,25 dB / day • Weight : 7.5 Kg max
Output Power ( I dB ) : + 15dBm (min) Temperature : 0 to 50 Degrees Celsius Noise Figure : 8 dB max @ 0 dB Attenuation
Spurious Output : - 70 dBc max ( in – band ) Humidity : 0 % to 95 % ( non condensing ) Frequency Sense : Positive ( no inversion ) (* other options available
Connector : N/F
• Monitor : RF LO, IF LO, RF Sample, IF
• Transfer Characteristic Sample
Gain : 0 - 30 dB in 0.5 dB or 0.25dB step *
Gain Slope : ± 0,05 dB / MHz max • Controlls : user friendly keypad with easy - C - BAND DOWN CONVERTER CM 22943 - XDx SPECIFICATION
Gain Flatness : ± 0,5 dB in 36MHz or 72 MHz to - learn instructions and
(-XU4) * interactive LCD display Remote
Gain Stability : ± 015 dB / day M & C ( RS -232 or RS -485 )
The C-Band BUC CMBC Series is designed for reliable and
Noise Figure : 10 dB max @ 0 dB Attenuation ease building of satellite terminal (VSAT).
Frequency Sense : Positive ( no inversion ) • Primary Power : 180 - 260VAC, 47 ~ 63 Hz or 48VDC
Phase Noise ( SSB ) : -70 dBc @ 100 Hz • Dimension ( D x W x H ) : 23,5’’ x 19’’ x 1,75’’ in The CMBC Series is an outdoor C-Band Block Up converter
-83 dBc @ I KHz • Weight : 7.5 Kg max
-93 dBc @10 KHz with phase noise better than IESS-308/309 standard.
-100 dBc @ 100 KHz (* Options available The DC feed and 10 MHz reference are multiplexed on
L-Band IF coaxial input cable.
CMBC-2 : 2 watt
C - BAND DOWN CONVERTER CM 22943 - XDx SPECIFICATION
CMBC-5 : 5 watt
CM22943-XDx is a single rack unit synthesized double CMBC- I 0 : 9 0 watt
conversion Extended C¬Band Down Converter with CMBC-20 : 20 watt
phase noise better than IESS-308/309 standard.The unit
converts 3.4-4.2 GHz signal to IF signal. It incorporates
extensive monitor and control functions that are
accessible from the front panel as well as through a
remote RS-232 and RS-485 bus.
• Frequency range : 5925 - 6425 MHz (Standard C) • Gain Slope : 0.03dB/MHz max. Output Impedance / Return Loss : 50 Ohm / -18 dB max Gain :45dB min
: 5925 - 6725 MHz (Extended C, Gain : 70dB min Gain Adjustment : 30dB in 0.5dB Step
• Gain stability over temperature : ± I dB
with –X suffix) Gain Adjustment : 30dB in 0.5dB Step Output Power (I dB) :12 dBm min
• Output Power • Gain stability @ constant temp. : ± 0.25 dB/24 hrs max Power Output (I dB) LC505 : 5W (+ 37 dBm) Intermodulation :-50 dBc @ OdBm output
CMBC-2 : 2W (36 dBm) • Inter-modulation product : -25dBc max @ 3dB back off LC510 : 10W (+ 40 dBm) Spurious :-60 dBc max
CM BC-5 : 5W (37 dBm) LC520 : 20W (+ 43 dBm) LNA Bias : 15 VDC @ 250mA max
CMBC-10 :10W (40 dBm) • Harmonic : -60 dBc max LC560 : 60W (+ 47.8 dBm)
CMBC-20 : 20W (43 dBm) LC5100 : 100W (+ 50 dBm ) •Connector
• AM/PM Conversion : 2.00 /dB max @ -6dB rated power Intermodulation :-25 dBc @ 3dB Back off RF Output : N/F or CPR- 137
• Output Connector : CPR-137 • Noise & Spurious AM / PM Conversion : 2°/dB max. @-6dB rated power RF Input : N/F
• Input Connector : N/F 3.4 - 4.2 GHz : < -1 OOdBm/4 KHz Spurious :-60 dBc max IF Output / Input : NlF or TNC/F
5.8-7GHz : < - 35dBm/4KHz
• Impedance : 50 Ohm or 75 Ohm *
• Phase Noise : 6dB better than IESS-308 • Receiver • Environment
• VSWR : 1.3:1 Max Input Frequency : 3.400 - 4.200 GHz, in I MHz or Operating temperature : 0° to 50° C
• Group Delay (any 40MHz BW) 125* KHz Step Non operating : -50° to 70° C
• Input frequency : 950 ~ 1525 MHz
Linear : ± 0.01 ns/MHz Input Impedance / Return Loss :50 Ohm / -20 dB max Humidity : up to 100% non condensing
• LO : 4900 MHz Parabolic : ± 0.001 ns/MHzZ Output Frequency :70 ± 20 MHz or 140* ± 20 MHz
Ripple : ± 0.25 ns Flatness : ± 0.5 dB (in 36MHz BW)* (* Options available
• Reference : 10MHz, -5 - 5dBm
• Environment Output Impedance / Return Loss :75 Ohm /-23 dB or 50 Ohm/- 18dB *
• Spectrum Sense : Non Inverting
Operating temperature : 0° to 50° C
• Gain : 55dB* Non operating : -50o to 70’ C
• Flatness Humidity : up to 95% non condensing
Full Band : ±2 dB
40MHz : ± 0.5 dB *) Options available C-Band SSPA CMPC Series SPECIFICATION
100 Defense Industry Products Catalogue Defense Industry Products Catalogue 101
CMI TEKNOLOGI
PT. INTERNATIONAL MIRATECH TRADINDO
PT. INTERNATIONAL MIRATECH TRADINDO
PT. PALINDO MARINE PT. INTERNATIONAL MIRATECH TRADINDO
PT . PALINDO MARINE
PRESIDENT DIRECTOR FEATURES AND TECHNICAL SPECIFICATIONS IMAGE C 1900s SUITCASE CONSOLE
IMAGE C 1900s’ Specification Body
PT. INTERNATIONAL MIRATECH TRADINDO based in
• Resin Abs And Carbon Fiber
Jakarta is one of the providers of goods and services in
• Stainless Steel Key Production
partnership with the TNI Headquarters and the
• Fold Down Handles
Indonesian Ministry of Defense.
• Dust And Shock Proof Suitcase
IMAGE™ is the nation pride product development in
• Interior Dimension: 56,4 X 43.4 X 31,9Cm (L X W X H )
the form of an Electronic
• Overall Weight 35 Kg
Signal Generation Fleet Maneuvers which makes
it easy, fast and guaranteed confidentiality in
Interfacing
the transmission / reception news / password data.
• 19 Inch 4 : 3 Touchscreen Monitor
As a provider of goods, we are very proud
• High Contrast Ratio
of the development of products that can
• High Sensitivity Trackball
participate and build the TNI military forces in the field
• QWERTY Keyboard
of signal equipment Manuvre KRI Navy.
President Director
Machine
• 2,5 Ghz Speed Processor
• Operational Temp 10-350 C
• 2 Gb Memory
• 30 Gb Media Storge
• 500 Va Ups
Code Section
• Message Delivery And Receive Trime
• Message Delivery And Receive Identifier
• Time Adjusment
• New Commands Spesificially Rasised
Indicators
• Connection (Online or Offline Status)
• Standby and Execute indicators for FOLLOWING
Upgrade Features COMANDS
• Sound Notification • Emergency indicator to indicate danger Comands
• ATP 1 Delta Supported • Indicator for CODED Form or Clear language
• Data Storage
Connections To Other Ships
Digital Encylopedia • Supports Joint Exercises With Other Ships As Well As
• Indexed View Indipendent Practice
• Coded Form • Able To Point-To-Point Message Sending Mode
• Searching Method for Advanced Users • Encrypted Messageswith 64 Kb Encrytion Method
• Dual Languange Support 9English And Indonesian)
all goods of our product in which its content of raw materials; rubber and metal have been through laboratory
Test and Field Run Test.
Our Products have been used By Indonesian Army Military ( TNI - AD ), also cooperated with PT. PINDAD
(Corporation ) Bandung in the manufature and development of the armor components of defense vehicle,
among other :
• Track Link Scorpion Tank
• Track Link AMX-13 Tank
• Track Link BTR - Amphibious Tank
• Panzer VAB Component
• Etc.
In addition, our products have been also used to replace / rebuilding rubber component of commercial vehicle
such as bus and truck.
We are invited to attend Bilateral Business Meeting in Turkey, one of commodities required has been rubber
product ( Rubber Pad for Tank ) for asia Pacific zone in April 2007, Our product have been recommended by
Repaircraft Scorpion England.
We are available to serve the manufacturer of vehicle component of other type under any specification desired.
BUSHING
RUBBER PAD
108 Defense Industry Products Catalogue Defense Industry Products Catalogue 109