Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
To Contents Page
U BOP
The Cameron U BOP is the most widely used ram-type BOP for land, platform • Hydraulically operated locking mechanisms, wedgelocks, lock the ram
and subsea applications worldwide and offers the widest range of sizes of any hydraulically and hold the rams mechanically closed even when actuating
Cameron ram-type BOP. pressure is released. The operating system can be interlocked using
Like all other Cameron preventers, the rams in the U BOP are pressure- sequence caps to ensure that the wedgelock is retracted before pressure is
energized. Wellbore pressure acts on the rams to increase the sealing force and applied to open the BOP.
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually • For subsea applications, a pressure balance chamber is used with the
improved by increased well bore pressure. wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
Other features of the U BOP include: due to hydrostatic pressure.
• Bonnet seal carrier is available to eliminate the need for high makeup Other features include hydraulically opening bonnets, forged body and a
torque on bonnet studs and nuts. wide selection of rams to meet all applications. See pages 11 through 17
for rams available to fit the U BOP.
SD-3772
Wedgelock Assembly
SD-5308
U Blowout Preventer
To Contents Page
U BOP Hydraulic Control System
The U blowout preventer is designed so that hydraulic pressure opens and Ram opening pressure opens the rams. Following ram change-out, this
closes the rams and provides the means for quick ram change-out. pressure closes the bonnets. The rams are pulled outward, near the bonnets
Ram closing pressure closes the rams. When the bonnet bolts are removed, before the bonnets begin moving toward the preventer body. This assures that
closing pressure opens the bonnet. After the bonnet has moved to the fully the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic
extended position, the ram is clear of the body. An eyebolt can be installed in the pressure draws the bonnets tightly against the preventer body and the bonnet
top of each ram to lift it out of the preventer. bolts are reinstalled to hold the bonnets closed.
SD-84-05
U BOP Operating Data and Fluid Requirements Large Bore Shear Bonnet Operating Data and Fluid Requirements
Bore Size and Gals to Open Gals to Close Locking Closing Opening Bore Size and Gals to Open Gals to Close Locking Closing Opening
Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio
Pressure (1 Set) (1 Set) (Each End) Pressure (1 Set) (1 Set) (Each End)
7-1/16" All WP 1.3 1.3 18 6.9:1 2.2:1 7-1/16" All WP __ __ __ __ __
11" Except 15,000 psi 3.4 3.5 27 7.3:1 2.5:1 11" Except 15,000 psi 6.8 6.0 27 12.0:1 4.8:1
11" 15,000 psi 5.7 5.8 32 9.8:1 2.2:1 11" 15,000 psi 8.9 9.0 32 15.2:1 3.7:1
13-5/8" Except 15,000 psi 5.5 5.8 32 7.0:1 2.3:1 13-5/8" Except 15,000 psi 10.5 10.9 32 10.8:1 4.5:1
13-5/8" 15,000 psi Model B 10.4 10.6 45 10.6:1 3.6:1 13-5/8" 15,000 psi Model B 16.0 16.2 45 16.2:1 6.0:1
16-3/4" 3000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 3000 psi Model B 18.2 19.0 38 10.4:1 4.4:1
16-3/4" 5000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 5000 psi Model B 18.2 19.0 38 10.4:1 4.4:1
16-3.4" 10,000 psi 11.6 12.5 45 6.8:1 2.3:1 16-3.4" 10,000 psi 18.2 19.1 45 10.4:1 4.4:1
18-3/4" 10,000 psi 21.3 23.1 54 7.4:1 3.7:1 18-3/4" 10,000 psi __ __ __ __ __
20-3/4" 3000 psi 8.1 8.7 46 7.0:1 1.3:1 20-3/4" 3000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 2000 psi 9.0 8.7 46 7.0:1 1.3:1 21-1/4" 2000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 5000 psi 27.3 30.0 54 7.2:1 4.0:1 21-1/4" 5000 psi __ __ __ __ __
21-1/4" 10,000 psi 24.5 26.9 51 7.2:1 4.0:1 21-1/4" 10,000 psi __ __ __ __ __
26-3/4" 3000 psi 10.1 10.8 58 7.0:1 1.0:1 26-3/4" 3000 psi __ __ __ __ __
To Contents Page
U BOP Specifications and Accessories
Your Cameron representative can provide information on non-standard The capital letters in the following designations refer to the three U BOP
BOP assemblies. The following specifications apply to typical Cameron dimensional views and dimensions charts shown on the following page.
U type BOPs: A-1 Length - bonnets closed, locking screws locked
• Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath A-2 Length - bonnets opened, locking screws unlocked
each set of rams on either or both sides of U BOPs. Side outlets can be A-3 Length - bonnets closed, with wedgelocks
studded, open-face flange or clamp hub with the same pressure rating as the A-4 Length - bonnets opened, with wedgelocks
vertical run connections. B-1 Height - flanged
• Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A B-2 Height - clamp hubs
or applicable standards. Type 6BX flanges are standard for 10,000 and B Height - added height if 30" spacing is required for double
15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore C Width - no side outlets
BOPs. D Centerline of preventer to outlet flange or hub face. This distance is
• Hydraulic control connections for operation of rams and bonnets are 1" NPT. variable and must be determined per individual specifications.
There are two connections for each set of rams. Wedgelock connections are E-1 Centerline of side outlet (outlet below rams in double) to bottom flange
1/2" NPT. face
E-2 Centerline of side outlet (outlet below rams in double) to bottom hub
• The dimensions chart shown on the following page does not include spacers
face
between rams for double ram models. U BOPs with spacers to clear tool
F-1 Top of upper ram to top flange face
joints can be obtained on special order.
F-2 Top of upper ram to top hub face
G Height of ram
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram
To Contents Page
U BOP Dimensions ▲
▲
▲
A ▲ C
▲ ▲ D
F ▲ ▲
▲
SD-84-201
G Top View - Single or Double U BOP
▲
▲
J B
▲
▲ A
G
▲ ▲
H F
▲
▲
▲
E
▲▲ SD-84-201 ▲ G B
▲ ▲
E SD-9928
Side View - Double U BOP ▲ ▲
Side View - Single U BOP
To Contents Page
7-1/16" 3000 - 11" 10,000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
To Contents Page
11" 15,000 - 16-3/4" 5000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
To Contents Page
16-3/4" 10,000 - 26-3/4" 3000 psi WP U BOP Part Numbers
22
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
29 6
33 9 U BOP Exploded View
27
3 28
13 8
7 14
10
To Contents Page
U BOP Pipe Rams
Pipe rams are available for use in Cameron U BOPs to fit all commonly used
sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on
this page and the next page. Cameron pipe rams include the following features: Top Seal
• Cameron pipe rams are self-feeding and incorporate a large reservoir of
packer rubber to ensure a long-lasting seal under all conditions.
• Ram packers lock into place and are not dislodged by well flow.
• All Cameron pipe rams are suitable for H 2S service per NACE MR-01-75.
• CAMRAM™ top seals are standard for all U BOP pipe rams from 7-1/16”
through 18-3/4” sizes (For U and UII BOPs through 18-3/4," part numbers
beginning with 644XXX indicate the CAMRAM lipped plate design. Other part SD-10825
numbers may use the standard elastomer material and reinforced plates. Verify
Packer
this with your Cameron representative).
• CAMRAM 350™ packers and top seals are available for high temperature
U BOP Pipe Ram
service and for service in which concentrations of H 2S are expected. Ram
Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer
Blind 644504-01 644500-01-00-02 644215-01-00-01 644219-01 044118-01 644218-01-00-01 644222-01 044121-01 644221-02 644225-01 044147-01-00-01 644224-01-00-01
1.050" 644504-02 644501-01 644215-02 – – – – – – – – –
1.315" 644504-03 644501-02 644215-03 044233-25 044118-07 019243-08 – – – 644225-02 044148-06 644224-02
1.660" 644504-04 644501-03 644215-04 44233-02 044118-02 019243-06 644222-02 044121-02 644221-02 644225-03 044148-05 644224-03
1.900" 644504-05 644501-04 644215-05-00-01 044233-03 044118-03 019243-05 644222-03 044121-03 644221-03 644225-04 044148-07 644224-04
2.062" 644504-06 644501-05 644215-06 044233-04 044118-04 019243-04 644222-04 044121-04 644221-04 644225-05 044148-03 644224-05
2.375" 644504-07 644501-06 644215-07-00-01 644219-06 044118-05 644218-06-00-01 644222-05 044121-05 2010454-05* 644225-06 44148-01-00-01 644224-06-00-01
2.875" 644504-08 644501-07 644215-08-00-01 644219-07 044118-06 644218-07-00-01 644222-06 044121-06 2010454-06* 644225-07 044148-02 644224-07-00-01
3.500" 644504-09 644502-01-00-01 644215-09-00-01 644219-08 644835-01-00-02 644218-08-00-01 644222-07 644753-01 2010454-07* 644225-08 644738-01-00-01 644224-08-00-01
4.000" 644216-11 644503-02 644215-11-00-01 644219-10 044119-02 644218-10 044234-10 044122-04 690808-09 644225-10 44149-02 644224-10-00-01
4.500" 644216-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01 644222-09 644753-02 2010454-09* 644225-11 644738-02 644224-11-00-01
4.750" – – – 044233-12 044119-04 019374-04 – – – 644225-13 044150-01 644224-13
5.000" 644216-14 644503-05 644215-14-00-01 644219-14 644835-03-00-01 644218-14-00-01 644222-10 644753-03 2010454-10* 644225-14 644738-03 644224-14-00-01
5.500" 644216-15 644503-06 644215-15-00-01 644219-16 044120-01 644218-16 044234-13 044123-01 2010454-01 644225-16 044150-03 644224-16-00-01
5.750' – – – 044233-23 044120-10 644218-17 – – – – – –
6.000" – – – 044233-16 044120-02 644218-18 044234-14 044123-02 690808-13 044244-13 044150-04 031215-09
6.625" – – – 044233-17 644835-04 644218-19-00-01 044234-15 044123-03 690808-14 644225-18 644738-04-00-02 644224-18-00-01
7.000" – – – 044233-18 044120-04 644218-20-00-01 044234-16 044124-01 2010454-14 644225-19 044151-01-00-01 644224-19-00-01
7.625" – – – 044233-19 044120-05 644218-21-00-01 044234-17 044124-02 690808-16 044244-15 044151-02 644224-20
7.750" – – – 044233-22 044120-09 644218-22 – – – 044244-25 044151-06 019506-09
8.625" – – – 044233-20 044120-06 644218-23 – – – 044244-16 044151-03 644224-22
9.000" – – – – – – – – – 044244-24 044151-04 019506-06
9.625" – – – – – – – – – 644225-24 044151-05-00-01 644224-24-00-01
10.750" – – – – – – – – – 044244-18 044152-01 644224-25
11.750" – – – – – – – – – 044244-26 614208-01 644224-26
3.500" Aluminum 644216-10 644503-01 644215-10 044233-08 044119-06 644218-09 – – – 044244-20 044149-04 031215-16
4.500" Aluminum 644216-13 644503-04 644215-13 044233-11 044119-07 644218-12 – – – 044244-10 044149-05 031215-17
5.000" Aluminum – – – 44233-24 44119-08 644218-15 – – – 44244-32 44150-08 31215-27
11
To Contents Page
Part Numbers for U BOP Pipe Rams
13-5/8" U BOP 16-3/4" U BOP 18-3/4" U BOP 21-1/4" U BOP
Pipe 15,000 psi 3000, 5000 and 10,000 psi 10,000 psi 5000 and 10,000 psi
Size Top Seal 644226-01 Top Seal 644229-01-00-01 Top Seal 644232-01-00-01 Top Seal 2010939-01
Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer
Blind 644228-01 044143-01 644227-01 644231-01 044179-01 644230-01 644234-01 044184-01 644233-01 044262-01 044214-01 2010851-19
1.050" __ __ __ __ __ __ __ __ __ __ __ __
1.315" __ __ __ __ __ __ __ __ __ __ __ __
1.660" __ __ __ __ __ __ __ __ __ __ __ __
1.900" __ __ __ 644231-02 044180-03 644230-02 __ __ __ __ __ __
2.062" 044243-02 044144-03 040910-20 __ __ __ __ __ __ __ __ __
2.375" 644228-03 044144-01 644227-03 644231-03 044180-01 644230-03 044254-02 044185-01 644233-02 044262-02 044215-01 2010851-01
2.875" 644228-04 044144-02 644227-04 644231-04 044180-02 644230-04 044254-03 044185-02 644233-03 044262-03 044215-02 2010851-02
3.500" 644228-05 644739-01 644227-05 644231-05 644740-01 644230-05 644234-04 644741-01 644233-04-00-01 044262-04 644743-01 040962-03
4.000" 644228-07 044144-06 644227-07 644231-06 044181-02 644230-06 044254-06 044185-05 644233-06 044262-06 044215-05 040962-04
4.500" 644228-08 644739-02 644227-08 644231-07 644740-02 644230-07 044254-07 644741-02 644233-07 044262-07 644743-02 2010851-05
4.750" 044243-10 044145-01 040910-07 644231-08 044181-04 644230-08 044254-09 044185-08 041856-06 044262-09 044215-08 040962-06
5.000" 644228-11 644739-03 644227-11-00-01 644231-09 644740-03 644230-09 644234-10 644741-03 644233-10-00-01 044262-10 644743-03 2010851-07
5.500" 044243-12 044145-03 040910-08 644231-10 044181-06 644230-10 044254-11 044185-10 644233-11 044262-11 044215-10 2010851-08
5.750' __ __ __ __ __ __ __ __ __ __ __ __
6.000" 044243-14 044145-04 040910-09 644231-11 049291-01 644230-11 044254-13 044185-12 041856-09 044262-13 044215-12 040962-09
6.625" 044243-15 644739-04 644227-14 644231-12 049291-02 644230-12 044254-14 044185-13 644233-13 044262-14 044215-13 2010851-10
7.000" 044243-16 044146-01 644227-15 644231-13 049291-03 644230-13 044254-15 044185-14 644233-14 044262-15 044215-14 2010851-11
7.625" 044243-17 044146-02 644227-16 644231-14 049291-04 644230-14 044254-16 044185-15 041856-12 044262-16 044215-15 040962-12
7.750" 044243-22 044146-07 644227-17 __ __ __ __ __ __ __ __ __
8.625" 044243-18 044146-03 040910-13 644231-15 049291-06 644230-15 044254-17 044185-16 041856-13 044262-17 044215-16 040962-13
9.000" 044243-19 044146-04 040910-14 644231-16 049291-07 644230-16 044254-18 044185-17 041856-14 044262-18 044215-17 040962-14
9.625" 044243-20 044146-05 644227-20 644231-17 049292-01 644230-17 044254-19 044185-18 644233-18 044262-19 044215-18 040962-15
10.750" 044243-21 044146-06 644227-21 644231-18 049292-02 644230-18 044254-21 044185-21 644233-19 044262-20 044216-01 040962-20
11.750" __ __ __ 644231-19 049292-03 644230-19 __ __ __ 044262-21 044216-02 040962-21
13.375" __ __ __ 644231-20 049292-04 644230-20 044254-22 044185-20 644233-20 044262-22 044216-03 2010851-22
13.625" __ __ __ __ __ __ __ __ __ 044262-24 044216-05 040962-24
13.750" __ __ __ __ __ __ __ __ __ __ __ __
16.000" __ __ __ __ __ __ __ __ __ 044262-23 44216-04 644233-20
3.500" Aluminum 044243-06 044144-05 040910-16 __ __ __ 044254-05 044185-04 041856-16 044262-05 044215-04 040962-16
4.500" Aluminum 044243-08 044144-08 040910-05 __ __ __ 044254-08 044185-07 041856-17 044262-08 044215-07 040962-17
5.000" Aluminum __ __ __ __ __ __ __ __ __ __ __ __
12
To Contents Page
Hang-Off Weights Hang-Off Weights
(See Cameron Engineering Bulletin 636)
Hang-off weights are estimated capacities with hardened top corners of the Pipe Size Pipe Rams
hang-off rams. This enables the rams to dig into the tool joint and provide 3-1/2" 425,000 lbs
superior hang-off capacity while still meeting NACE requirements. 4-1/2" 550,000 lbs
For variable bore rams (VBRs) and FLEXPACKER rams, hang-off data refer 5" 600,000 lbs
to Cameron Engineering Bulletin 859D. 5-1/2" 600,000 lbs
6-5/8" 600,000 lbs
11 10
6
3 1
8 2
7
5
12 15
10 1 2
13 2
SD-9348
4 5
3
4 7
1
14
11 SD-10815 5 SD-10827
3
9
DS Shearing Blind Ram
6
13-5/8" 5000 and 10,000 644781-01 644780-01 644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 644581-01-00-01 644582-01 644781-02 644780-02 046751-01-00-01 046752-01-00-01 644223-01-00-01 644581-02-00-01
18-3/4" 10,000 2010186-01 2010187-01 2010192-01 2010191-01 2010190-01 2010193-01 2010182-01 644524-01 2010186-02 2010188-01 2010191-01 2010190-01 2010193-01 2010183-01
13
To Contents Page
U BOP DS Shearing Blind Ram
(See page 13 for item number reference)
Description and Item Number
BOP Bore Size and 1 2* 3* 4* 5* 6* 7 8** 9** 10** 11
Working Pressure Upper Ram Body Side Side Blade Blade Lower Ram Body Side Side Top Seal
Subassy. Packer Packer Seal Seal Subassy. Packer Packer (2 Required)
11" 5000 and 10,000 psi 645078-01-00-01 645079-01-00-01 645080-02-00-01 645080-01-00-01 645031-02-00-01 645031-02-00-01 645078-02-00-01 645079-02-00-01 645080-02-00-01 645080-01-00-01 644217-02-00-01
13-5/8" 5000 and 10,000 psi 645026-01-00-01 645027-01-00-01 2010985-01 2010985-02 2010986-01 2010986-02 645026-02-00-01 645027-02-00-01 20101985-01 2010985-02 6445033-01-00-01
14
To Contents Page
Large Bore Shear Bonnets
SD-10816
12A**
2A
24A
26A
5A
42A
Large Bore Shear Bonnet Assembly
(See pages 8, 9 and 10 for items not called out on this drawing.)
7 10
17
9
13 16
11
15
2
23 SD-10803-99
5
6
1
Tandem Booster Exploded View
8
4
3
14
12
15
To Contents Page
U BOP DSI and DVS Shear Rams
Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are DVS rams are similar in design to the standard shearing blind rams except
also available for the U BOP. The interlocking feature of these rams provides the that both blades are V shaped and interlocked. The DVS rams are capable of
capability of shearing wireline and braided cable with zero tension in the line, shearing tubing, small pipe , braided cable and slickline.
while still maintaining a seal. The blades are interlocked by using pockets in the
lower ram and arms on the upper ram to prevent any gap between blade surfaces.
DSI rams are similar to standard DS shear rams except for the interlock
feature. DSI shear rams are capable of shearing tubing, small pipe, braided
cable, slickline and solid sinker bar.
Blade Seal
Upper Shear Ram
Side Packer Blade Packer
Lower Shear Ram Side Packer
Dual String Interlocking (DSI) Shear Rams Double V Shear (DVS) Shear Rams
16
To Contents Page
FLEXPACKER™ and FLEXPACKER-NR™s Inserted Packers
The Cameron FLEXPACKER ram is the latest development in multiple-bore The Cameron Inserted Packer for stripping/snubbing service is designed
sealing. Each FLEXPACKER ram is designed to close and seal around several with a field replaceable, wear-resistant non-rotating insert block. The insert
diameters of tubing and pipe. The Cameron FLEXPACKER-NR is a narrow block is fabricated from a specially formulated ultra-high molecular weight
range variable bore ram packer designed for use with tapered drill strings. polyethylene (UHMW-PE) which extends service life. The insert block is
These packers can be used in existing Cameron BOPs. designed to be self-locking in the packer and should not require screws or other
fasteners to hold it in place. The Cameron design eliminates the major causes
FLEXPACKER Sizes and Part Numbers of failure for inserted packers using semicircular inserts held in place with
BOP Size and Pipe Size Packer Top Seal screws, including rapid insert wear out and insert rotation resulting in
Working Pressure Range Part No. Part No. permanent packer damage.
11" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2" 2010123-01 644217-01-00-01
13-5/8" 3000, 5000 and 10,000 psi 2-3/8" to 3-1/2" 2010113-01 644223-01-00-01
18-3/4" 10,000 psi 2-7/8" to 5" 645346-01 644232-04 Inserted Packer Sizes and Part Numbers
20-3/4" 3000 psi 5" to 7" 645353-01 019514-00-00-01
BOP Size Pipe Size Packer Assy. Insert Modified Packer
21-1/4" 2000 psi 5" to 7" 645353-01 019514-00-00-01 Part Number Part Number Part Number
7-1/16” 15,000 psi WP 2-3/8” 2010833-04 2010771-04 2010813-04
7-1/16” 15,000 psi WP 2-7/8” 2010833-05 2010771-05 2010813-05
FLEXPACKER-NR Sizes and Part Numbers 7-1/16” 15,000 psi WP 3-1/2” 2010833-06 2010771-06 2010813-06
7-1/16” 15,000 psi WP 4-1/2” 2010833-07 2010771-07 2010813-07
BOP Size and Working Pressure Pipe Size Range Part Number
11” 10,000 psi WP 2-3/8” 2010952-01 2010938-01 2010937-01
11” 3000, 5000, and 10,000 psi WP, Type U 2-3/8” x 3-1/2” 2011740-01
11” 10,000 psi WP 2-7/8” 2010952-02 2010938-02 2010937-02
11” 3000, 5000, and 10,000 psi WP, Type U 3-1/2” x 5” 2163445-01 11” 10,000 psi WP 3-1/2” 2010952-03 2010938-03 2010937-03
13-5/8” 3000, 5000 and 10,000 psi WP, Type U 2-3/8” x 3-1/2” 2011716-01 11” 10,000 psi WP 4-1/2” 2010952-04 2010938-04 2010937-04
13-5/8” 3000, 5000 and 10,000 psi WP, Type U 3-1/2” x 5” 2011673-01 11” 10,000 psi WP 5” 2010952-05 2010938-05 2010937-05
13-5/8” 3000, 5000 and 10,000 psi WP, Type U 5” x 6-5/8” 2011688-01
18-3/4” 10,000 psi WP, Type U 5” x 6-5/8” 2011907-01
18-3/4” 10,000 psi WP, Type U 3-1/2” x 5” 2011701-01
SD-10315 SD-016611
SD-24364
FLEXPACKER FLEXPACKER-NR Inserted Packer
17
To Contents Page
Bonnet Rebuild Softgoods Kits Kit Part Numbers
BOP Size Pressure Rating/Bonnet Type Kit Part Number*
For popular size U BOPs, a bonnet rebuild softgoods kit is available to 7-1/16" 3000, 5000, 10,000 and 15,000 psi All 644909-01
provide all parts required to reseal the operating system. 11" 2 3000, 5000 and 10,000 psi Pipe 644909-02
Kit parts are shrink-film packed to prevent loss and assure long shelf life. 11” 15,000 All 644831-08
The kits are less expensive than individual parts. All parts in each kit are 13-5/8" 3000, 5000 and 10,000 psi Pipe 644909-03
identified with part numbers and parts list index numbers. 13-5/8” 15,000 All 644831-12
16-3/4" 5000 psi Pipe 644831-14
16-3/4" 10,000 psi All 644831-15
18-3/4" 10,000 psi All 644909-04
20-3/4" 3000 psi Pipe 644831-17
21-1/4" 2000 psi Pipe 644831-18
21-1/4" 5000 psi All 644831-19
21-1/4" 10,000 psi Pipe 644831-21
26-3/4" 3000 psi All 644831-22
*1 kit contains softgoods for 1 bonnet.
18 19
24
26
42
34
SD-5287
18
To Contents Page
Hydraulic Bonnet Bolt System Bonnet Bolt and Tensioner Part Numbers
BOP Size and Bonnet Compact
Working pressure (psi) Bolt Tensioner Unit
The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads 11" 15,000 All 049795-13-10 614644-13-10*
and reduces the time required for making up and breaking out bonnet bolts. 13-5/8" 5000 Pipe Ram 049795-13-05 614644-13-05*
• The hydraulic bonnet bolt is completely interchangeable with conventional 13-5/8" 5000 Shear Ram 049917-13-05 614644-13-05*
bonnet bolts. It has a standard hexagonal head. An additional external 13-5/8" 10,000 Pipe Ram 049795-13-10 614644-13-10
thread mates with the internal threads in the operating head of the hydraulic 13-5/8" 10,000 Shear Ram 049917-13-10 614644-13-10*
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod 13-5/8" 15,000 All 049795-13-15 614644-16-10**
permanently secured in the machined hole in the center of the bolt. 16-3/4" 5000 Pipe Ram 049795-16-05 614644-16-05*
• The hydraulic bonnet bolt tensioner consists of a compact tensioner unit 16-3/4" 5000 Shear Ram 049917-16-05 614644-16-05
with a remote pump. 16-3/4" 10,000 All 049795-16-10 614644-16-10**
18-3/4" 10,000 All 049795-18-10 614644-18-10**
21-1/4" 5000 All 049795-21-05 614644-18-10**
*Use 25,000 psi WP pump, part number 645035-01.
**Use 30,000 psi WP pump, part number 645035-02.
Bonnet Seals and Connecting Rod Seals U BOP CAMLAST Bonnet and Connecting Rod Seals
BOP Pressure Rating Nitrile CAMLAST
Size (psi) Bonnet Seal Conn.Rod Seal Bonnet Seal Conn.Rod Seal
For applications where only bonnet and/or connecting rod seals are
7-1/16" 3000, 5000, 10,000 and 15,000 644197-01-00-01 212741-37-00-01 644573-01 645077-37
required, Cameron offers individually packaged components. Connecting rod
11" 3000, 5000 and 10,000 644197-02-00-01 212741-38-00-01 644573-02 645077-38
seals are nitrile rubber. Bonnet seals beginning with 644197 are the newest
11" 15,000 Model 79 049272-03 212741-38-00-01 644898-01 645077-38
design.
13-5/8" 3000, 5000 and 10,000 644197-03-00-01 212741-36-00-01 644573-03 645077-36
When high temperature and/or high concentrations of H2S are expected,
13-5/8" 15,000 644196-01 212741-36-00-01 644898-02 645077-36
Cameron recommends the used of CAMLAST bonnet and connecting rod seals
16-3/4" 3000 and 5000 Model B 644197-04-00-01 212741-44 644573-04 645077-44
along with CAMRAM 350 packers and top seals.
16-3/4" 10,000 Model II 644197-04-00-01 212741-44 644573-04 645077-44
18-3/4" 10,000 644197-05-00-01 212741-60 644573-05 645077-60
20-3/4" 3000 046613-16 212741-36-00-01 046613-26 645077-36
21-1/4" 2000 046613-16 212741-36-00-01 046613-26 645077-36
21-1/4" 5000 and 10,000 Model 79 644197-08 011741-58 – –
21-1/4" 7500 and 10,000 Model II 644197-07 011741-58 644573-07 645077-36
26-3/4" 2000 and 3000 046613-08 212741-36-00-01 – –
19
To Contents Page
U II BOP
The Cameron U II BOP takes all of the features of the U BOP and adapts them pressure is released. The operating system can be interlocked using
for subsea use in the 18-3/4” 10,000 and 15,000 psi WP sizes. sequence caps to ensure that the wedgelock is retracted before pressure
Like all other Cameron preventers, the rams in the U II BOP are pressure- is applied to open the BOP.
energized. Wellbore pressure acts on the rams to increase the sealing force and • A pressure balance chamber is used with the wedgelocks to eliminate the
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually possibility of the wedgelock becoming unlocked due to hydrostatic
improved by increased well bore pressure. Other features of the U II BOP pressure.
include: Other features include hydraulically opening bonnets, forged body and a
• Internally ported hydraulic stud tensioning system ensures that stud loading wide selection of rams to meet all applications. See pages 23 and 24 for
is consistently accurate and even. rams available to fit the U II BOP.
• Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
• Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
SD-10829
20
To Contents Page
U II BOP Hydraulic Control System
Bore Size and Gallons to Open Gallons to Close Gallons to Open Gallons to Close Closing Opening Gallons to Unlock Gallons to Lock
Working Pressure Pipe Rams (1 Set) Pipe Rams (1 Set) Bonnets (1 Set) Bonnets (1 Set) Ratio Ratio Wedgelock Wedgelock
18-3/4" 10,000 psi 22.3 24.7 33.7 25.2 6.8:1 2.5:1 5.5 0.66
18-3/4" 15,000 psi 32.3 34.7 43.9 35.2 9.3:1 3.5:1 5.5 0.66
18-3/4" 15,000 psi 25.8 28.3 37.4 28.7 7.6:1 2.9:1 5.5 0.66
with Cylinder
U II BOP Dimensions
▲
The following designations refer to the dimensional drawing: ▲
D
▲
A-1 Length -- bonnets closed, with wedgelocks C
A-2 Length -- bonnets opened, with wedgelocks
B-1 Height -- flanged ▲
B-2 Height -- Clamp hubs SD-5139
B-3 Height -- studded x flanged
C Width -- no side outlets
D Centerline of preventer to outlet flange or hub face. This distance is U II BOP Top View
variable and must be determined per individual specifications.
▲
▲
SD-5139
21
To Contents Page
U II BOP Part Numbers
47
46
6
43
42
41
43
42
41
11 38
29
4
49
37
36
35
30 7
31 34 48
5
45
44 33
3a
3b
32
40
19
54
42
39 41
10
9
8
28
51
27
25
24 SD-7866
26
22
23
18 1
2 17 21
16 20 U II Exploded View
14 15 19
13
12
52
53
22
To Contents Page
U II BOP Pipe Rams
U II BOP Pipe Ram Part Numbers
Pipe rams are available for use in Cameron U II BOPs to fit all commonly 18-3/4" 10,000 and 15,000 psi U II
used sizes of tubing, drill pipe, drill collar or casing within the ranges in the Pipe
PipeSize
Size Top Seal: 645282-01-00-01
chart on this page. Cameron pipe rams include the following features: Assembly Ram Packer
• Cameron pipe rams are self-feeding and incorporate a large reservoir of Blind 644248-01 615407-01 644247-01*
packer rubber to ensure a long-lasting seal under all conditions. 2.375" 644248-02 614770-01 644247-02*
• Ram packers lock into place and are not dislodged by well flow. 2.875" 644248-03 614770-02 644247-03*
3.500" 644248-04 644742-01 644247-04*
• Cameron U II pipe rams are suitable for H 2S service per NACE MR-01-75.
3.500" Aluminum 644248-05 614770-04 644247-05
• CAMRAM™ top seals are standard for all U II BOP pipe rams.
4.000" 644248-06 614770-05 644247-06
• CAMRAM 350™ packers and top seals are available for high temperature 4.500" 644248-07 644742-02 644247-07
service and for service in which concentrations of H 2S are expected. 4.500" Aluminum 644248-08 614770-07 644247-08
4.750" 644248-09 614770-08 644247-09
5.000" 644248-10 644742-03 644247-10-00-01
Top Seal Packer 5.500" 644248-11 614770-10 644247-11-00-01*
6.000" 644248-12 614770-12 644247-12-00-01
6.625" 644248-13 614770-13 644247-13
7.000" 644248-14 614770-14 644247-14
7.625" 644248-15 614770-15 644247-15
8.625" 644248-16 614770-16 644247-16
9.000" 644248-17 614770-17 644247-17
9.625" 644248-18 614770-18 644247-18-00-01
SD-5307
Ram Body
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe. Ram Body
23
To Contents Page
U II BOP Shearing Blind Rams
6
Cameron shearing blind rams shear the pipe in the hole, then bend the
lower section of sheared pipe to allow the rams to close and seal. Shearing
blind rams can be used as blind rams during normal drilling operations.
Features include of shearing blind rams include: 1
2
• Large frontal area on the blade face seal reduces pressure on the rubber and
7
increases service life. 4
• Cameron SBRs can cut pipe numerous times without damage to the cutting
edge.
• The single-piece body incorporates an integrated cutting edge.
SD-10827
• CAMRAM™ top seals are standard for all U II BOP shearing blind rams.
• H 2S SBRs are available for critical service applications and include a blade
5 3
material of hardened high alloy suitable for H 2S service.
• The Cameron shearing blind ram has a single-piece body with an integrated U II BOP Shearing Blind Ram
cutting edge.
U II BOP Shearing Blind Ram Assemblies 8
7 6
4
Item Description 18-3/4" 10,000 and 12
Item Description 10
15,000 psi
1 Upper Ram Assembly 2010214-01
2
2 Ram 2010216-01
3 Blade Packer 046910-05-00-01
4 Packer 615567-01-00-01
5 Packer 615568-01-00-01
**6 Top Seal 645282-01-00-01
7 Lower Ram Assembly 2010215-01 SD-10815
*8 Ram 2010217-01
3
*9 Packer 615567-01-00-01 5
1
*10 Packer 615568-01-00-01 11
*Part of lower ram subassembly, item 7.
**Part of upper and lower ram subassemblies, items 1 and 7. 9
U II BOP H2S Shearing Ram Assemblies U II BOP H2S Shearing Blind Ram
Item
Item Description
Description 18-3/4" 10,000 and
15,000 psi
1 Upper Ram Subassembly 644759-01
CAMRAM High Temp Shearing Blind Ram Blade and Side Packers
2 Ram 644752-01
7 Blade Insert 644519-03 Item
Item Description
Description 18-3/4" 10,000 and
15,000 psi
8 Cap Screw 644524-01
3 Blade Packer, High Temperature 644904-01
9 Lower Ram Subassembly 644759-02
4 Left Side Packer, High Temperature 644905-01
10 Ram 644752-02
5 Right Side Packer, High Temperature 644905-02
11 Blade Insert 644519-02
6 Top Seal, High Temperature 645246-01
12 Pin 200231-00
Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.
To Contents Page
UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers • Same bonnet used for both shear and pipe rams. The internal shear booster
designed for easy maintenance and long life. Both designs complement the can be reversed to act as a stroke-limiting device.
existing line of U preventers with interchangeable bonnets that can be installed • Internal booster provides the force necessary for shearing pipe and at the
on any comparable size U BOP. The shearing capabilities of the UL and UM same time provides a reduced sealing force for long ram seal life.
BOP bonnets are comparable to a U BOP bonnet with tandem boosters • Hydraulically operated locking mechanisms, wedgelocks are available for
installed. The UL and UM both utilize an internal booster that results in a subsea applications.
reduced weight and length for the preventers and eliminates the need for
• Most operating system seals can be replaced with the bonnet in the ram-
external plumbing. The UM now replaces the UL since the UM bonnet features
change position without removing the bonnets.
full stroke operation that allows for one-step ram removal. Other features of the
UL an UM BOPs include: • The UL and UM BOPs utilize the same rams as the U BOP.
• Bonnet seal carrier is available to eliminate the need for high makeup torque Other features include hydraulically opening bonnets, forged body and a wide
on bonnet studs and nuts. selection of rams to meet all applications.
EN
OP
SD-017936
EN
OP
UM Blowout Preventer
40
To Contents Page
31
UM BOP Components 30
31
23
3
6
35
37
42
32
5
33
34
26
22
35
6
37
4
43
34 33
29 41
27 28
38 24
39 20
46
11 47
14 12
10 51
2 40
25 36
SD-017936
15 13
17 16
UM BOP Exploded View
16 17
18
50
19
UM BOP Components
Item Description Qty. 26
Item Nut for Cylinder Head
Description 8
Qty.
1 Solid Block Body 1 26 Nut for Cylinder Head 8
2 Bonnet 2 27 Seal Ring, Tail Rod Seal 2
3 Operating Piston 2 28 Retainer Ring, Tail Rod Seal 2
4 Ram Change Piston, Open 2 29 Retaining Ring, Spirolox, Tail Rod 2
5 Ram Change Piston, Close 2 30 Seal Ring,Operating Piston Seal 2
6 Ram Change Cylinder 4 31 O-Ring, Operating Cylinder 4
10 Ram Guide Pin 4 32 O-Ring, Booster Piston Retainer 2
11 Retaining Ring, Spirolox, Connecting. Rod (Primary) 2 33 Seal Ring 4
12 Retaining Ring, Primary Connecting Rod Seal, 2 34 Wear Ring, Ram Change Piston 4
13 Back-Up Ring, Primary Connecting Rod Seal, 2 35 O-Ring, Ram Change Cylinder 8
14 Seal Ring, Primary Connecting Rod Seal 2 36 O-Ring, Ram Change Piston to Bonnet 4
15 Retainer Ring, Secondary Connecting Rod Seal, 2 37 O-Ring, Ram Change Piston to Body 4
16 Seal Ring, Seal for Secondary Connecting Rod 4 38 Stud, Lock Screw Housing 16
17 Back-up Ring for Secondary Connecting Rod Seal and 4 39 Nut, Lock Screw Housing 16
Hydraulic Seal, Connecting Rod (Secondary) 40 Lifting Eye, 2-1/8” Diameter 2
18 Retainer Ring for Hydraulic Connecting Rod Seal, 2 41 Booster Piston Retainer 2
19 Retaining Ring, Spirolox 2 42 Booster Piston 2
20 Locking Screw 2 43 Booster Piston Seal 2
22 Locking Screw Housing 2 46 Nameplate, Ram Type BOP, API 16A 1
23 Operating Cylinder 2 47 Nameplate, Patent - U BOP 1
24 Cylinder Head 2 50 Bonnet Bolt 8
25 Stud for Cylinder Head 8 51 Bonnet Seal, Compression Type 2
Note: Quantities listed are for a single ram BOP.
41
To Contents Page