Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Purpose:
The purpose of this document is to ensure correct methodology in carrying out Insulation work on
Flow Meter.
2. Scope:
This document covers detailed procedure for installation of Rockwool Insulation on the Flow meter.
.
3. Instructions Details of Installation of Thermal Insulation & Cladding:
All surfaces to be insulated shall be dry, clean and free from rust, loose mill scale, grease oil, dirt and
other foreign matter.
On Flow Meter LRB mattresses shall be applied.
Install the LRB Mattresses having 75mm thickness and gap filled with compressed Rockwool.
After the application of LRB mattresses, tightly secured the Insulation materials with S.S. tie wire.
At Flange joints LRB mattresses shall be secured to the cover by adhesives.
For more details refer attached drawing.
4. ALUMINIUM JACKETING
All Insulated surface will be finally covered with Al Cladding.
Plain Aluminum sheet should be fabricated so as to fit properly around the Insulated surface.
Aluminium Cladding will be fixed with min overlap of 50 mm.
The Aluminium cladding will be secured with ST Screws & SS Bands as per requirements.
All joints to be sealed using sealant.
Flange Boxes will be removable Type. & fix with toggle clip.
WORK INSTRUCTION
Document Title: Doc. Ref. :
Issue # / Year : 0/2018
PROCEDURE TO INSTALL THE Rev. : 00
Date : 27 July 2018
INSULATION ON FLOWMETER Issued by :
Page : 2 of 2