Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
C31 / 40
MOTORE HF ED ELETTROMANDRINO
12
serie
www.teknomotor.com c31/40 sb e c31/40 db
DATI GENERALI GENERAL INTRODUCTION ALLGEMEINE INFORMATIONEN
Gli elettromandrini della serie C31/40 sono The electrospindles series C31/40 have been Die Elektrospindeln C31/40 erreichen hohe
stati progettati per sviluppare un'elevata designed to generate a high power with Drehzahl und haben eine sehr schmale Form
potenza unita ad un ingombro limitato. limited overall dimensions. und kleinen Raumbedarf.
Queste caratteristiche, unite all'elevata velocità These features, joined to the high rotational Diese Hochtourige Spezialmotoren sind für
di rotazione consentita, li rendono ideali per speed, make these electrospindles the best Holz, Aluminium und PVC Bearbeitungen
l'applicazione su macchine per la lavorazione solution for the machinery of wood, geeignet.
del legno, dell'alluminio e del PVC. aluminium and PVC.
SERIE C31/40-SB: per lavorazioni da SERIES C31/40-SB: for rotational speed C31/40-SB SERIEN: für Drehzahl von
12.000 a 18.000 rpm laddove il carico sia from 12.000 to 18.000 rpm where the 12.000 bis 18.000 upm wo es
prevalentemente di tipo radiale. prevalent load is radial load. Radialebelastung gibt.
SERIE C31/40-DB: per lavorazioni da SERIES C31/40-DB: for rotational speed C31/40-DB SERIEN: für Drehzahl von
12.000 a 24.000 rpm con la presenza di un from 12.000 to 24.000 rpm where an axial 12.000 bis 24.000 upm wo es Axialebelastung
carico di tipo assiale. load is present. gibt.
13
serie
c31/40 sb www.teknomotor.com
C31/40 SB
M6x20
CHIAVETTA 6x6x35
Ø20
C 57.5 57.5
40 Filetto per pressacavo PG 11
Thread for cable gland PG 11
ALBERO TIPO L40
SHAFT TYPE L40
X
29
Ø56
CHIAVETTA 5x5x8
M6
40
Ø20
Ø16
M10
80
40
CHIA VE 17 mm
WRENCH 17 mm
11 9 41
6.7 27 B 2.7 22
CHIAVETTA 6x6x10 A 63
M20x1.5
15 15
C 57.5 57.5
Filetto per pressacavo PG 11
ALBERO TIPO L30 Thread for cable gland PG 11
SHAFT TYPE L30
X
29
Ø56
CHIA VE 20 mm
WRENCH 20 mm
M6
M25x1.5
40
ER20
Y
80
40
15 E M6
32 30.5 B 2.7 22
D 63
Y: posizione a richiesta.
Ø35
20
Ø
31 19
X: standard position for terminal board.
Ghiera GT 20 Y: position on demand.
Pinza ER 20 - Collet ER 20
Nut GT 20 Standard fixing holes on terminal board opposite side.
Ø min-max 1-13mm
Fixing holes on other sides on demand.
Collets, nuts and wrenches only on demand.
14