Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
RT 512
Level control trainer
Learning objectives/experiments
Description
• experimental introduction to con- A pump delivers water from a storage A process control software (RT 650.50)
trol engineering using an example tank to the transparent level-controlled is optionally available. The software per-
of level control tank. The liquid level is measured by a mits the construction of a complete net-
• construction of the system with pressure transducer installed at the worked system comprising multiple
components commonly used in in- base of the level-controlled tank. The trainers from the RT 512 – RT 552
dustry controller used is a state-of-the-art digit- series. The key process variables can
• digital controller with freely se- al industrial controller. The actuator in also be represented, and control func-
lectable parameters: P, I, D and the control loop is a pneumatically oper- tions executed.
all combinations ated control valve with an electro-pneu-
• integrated 2-channel line record- matic positioner. A ball valve in the outlet
er line enables defined disturbance vari-
• optional process control soft- ables to be generated. The controlled
ware RT 650.50 available variable X and the manipulating variable
• construction of a complete net- Y are plotted directly on an integrated
worked system via Profibus inter- 2-channel line recorder. Alternatively,
face possible the variables can be tapped as analogue
signals at lab jacks on the switch cabin-
This trainer provides a comprehensive et. This enables external recording
experimental introduction to the funda- equipment, such as an oscilloscope or a
mentals of control engineering using an flatbed plotter, to be connected.
example of level control.
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 1/3 - 03.2017
gunt
RT 512
Level control trainer
Specification
Technical data
Level-controlled tank
• max. 7L
• level: 0…0,6m
Pressure sensor: 0…100mbar
Pneumatically operated control valve DN 20
• Kvs: 4,0m3/h
• reference variable: 4…20mA
Process schematic • nominal stroke: 15mm
• characteristic curve equal-percentage
Line recorder
• 2x 4…20mA
• feed rate 0…7200mm/h, stepped
Controller
• process variables X, Y as analogue signals: 4…20mA
Screenshot of optional process control software RT 650.50: step response to change in Required for operation
reference variable, PI controller
Scope of delivery
1 trainer
1 set of cables
1 set of hoses
1 set of instructional material
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 2/3 - 03.2017
gunt
RT 512
Level control trainer
Optional accessories
G.U.N.T. Gerätebau GmbH, Hanskampring 15-17, D-22885 Barsbüttel, Telefon (040) 67 08 54-0, Fax (040) 67 08 54-42, Email sales@gunt.de, Web www.gunt.de
We reserve the right to modify our products without any notifications. Page 3/3 - 03.2017
Powered by TCPDF (www.tcpdf.org)