Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page 1 of 2
Issue Date 03-22-2019
Business Unit: Coatings, Adhesives & Specialties
Business Development Asia Pacific
Construction Coatings Draft Guide Formulation
Characteristic data:
Solid content on formulation (%) ~ 86.0%
Mixing Ratio Component A : B by weight 77.4 : 22.6
Initial viscosity of component A on Brookfield Viscometer at 25˚C 3700 cps
Mix viscosity of component A and B on Brookfield Viscometer at 25˚C 3900 cps
NCO : NH ratio ~ 1.2
Workable time at 25˚C / 45% RH 40 minutes
Mechanical Properties
Drying property ( RT 25ºC and 45% RH) T1: 2 hours,
T1 : Surface dry T2 : Hard dry T2 : 24 Hours
Other Information:
1. Base & hardener to be mixed under low speed to avoid air entrapment.
2. Waterproofing membrane is recommended to be applied over primed concrete surfaces.
3. Waterproofing membrane should be lay out by roller or brush application.
4. It is recommended to apply this in 2 coats, a gap of 12-18 hours is recommended between both
the layers.
5. When base and hardener mixed, the paint must be used immediately as it has limited workable time
(40 minutes).
6. For best results, the temperature during application and cure should be between 5°C and
35°C. High temperatures retard workable time.
IMPORTANT
This Guide Formulation and our technical advice – whether verbal, in writing or by way of trials – are given in good faith only for the receiver’s technical
awareness of the status of the art but without warranty or guaranty and this also applies where proprietary rights of third parties are involved.
Our information disclosure herewith does not release you from the obligation to verify the information currently provided – especially that contained in our Safety
Data and Technical Information Sheets – and to test our products as to their suitability for the intended processes and uses.
The application, use and processing of our products and the products manufactured by you are beyond our control and, therefore, entirely your own responsibility.
Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.
The present Guide Formulation and the performance test results contained herein (if any) are based on the combination of our material and the various chosen
ingredients of components according to our previous experience and is therefore for user's reference purpose only.
User of our material may change any other ingredient and/or the relevant percentage under the respective component at user’s discretion therefore shall be solely
responsible for any performance results that deviate from those stated in this Guide Formulation.
It is to be understood that when not deviating from the spirit or main characteristics of the Guide Formulation, it may be carried out in other forms. This Guide
Formulation is given without IPR freedom-to-operate guarantee, and polyurethane dispersions or isocyanates in the Guide Formulation are specified from
Covestro. The Receiver agrees that it is its own responsibility to check whether it has the freedom to use the Guide Formulation over any third party’s exclusive
rights, and it shall bear any and all liabilities related to any third party’s claim on the application of the Guide Formulation and hold us harmless from any such
claims. Covestro may withdraw this Guide Formulation when it is necessary.
Page 2 of 2
Issue Date 03-22-2019
Business Unit: Coatings, Adhesives & Specialties
Business Development Asia Pacific