Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Bill of Quantities
Name of works: Supply, installation, testing and commissioning of Electrical, sub-station and Lift
S.N. Description system for under construction of Market at Savar, Qnt. unit board,
Cantonment UnitDhaka.
rate Amount
(taka) (taka)
1. S/F Wiring complete for one light ,fan and bell point controlled
by one switch using PVC non shd single core cable1.3/1.5rm
(3/0.029) (iyal), holder, celing rose with PVC concealed
conduit as sch spd. Including switch board final sub ckt,
conduit heavy gauze and necessary consumables.
2. Supply ,Fitting, Fixing of 5-15watt LED Light, holder/shed for 2400 Nos.
Corridor with necessary fitting, Brand is as per direction of EIC
4. Exhaust fan AC 230/220 volts single plase 50HZ complete with 30 Nos.
capacitor ,blade ,louver, rain guard etc 400 mm sewp .Brand GEC or
direction of EIC
5. Pole PC tubular 12 m height supply ,setting & erection in position all 20 Nos.
as spd and direction of EIC
6. Three phage Meter Board with all excesories for Each Shop 15-200 amps 30 Nos.
7. Single phage Meter Board with all excesories for Each Shop 15-25 amps 1700 Nos.
8. Dish Cable Point for the all floor DB point with specified dish line cable 40
,other arrangement ,connectors point and as per direction of the EIC
10. Steel box made with 16 BG,MS/ plain sheet complete with hinged
type door(single/double shutter) built-in type locking system with
necessary arrangement for fixing of MCB/MCCBs by locking it’s
knob out on the top cover is shutter grey hammer spray painting to
the satisfaction of engineer in charge. All MCCB`s & ACB, From ABB,
SACE Italy /USA / UK / Germany / Switzerland /France (Adjustable),
10.6 1000A 04
10.7 800A 04
10.8 300A 04
10.9 250A 08
10.10 225A 02
10.11 200A 16
10.12 160A 02
10.13 150A 02
10.14 125A 36
10.15 100A 10
10.16 70A 02
10.17 63A 20
10.18 40A 30
a). 7 stops ( Ground floor + 1st Flr-6th floor) all on same side,
travel 25000 mm approx.
Incoming Feeder :
1 No. 33KV, 50HZ, 7KA (1 sec), Earthing switch to be interlocked
with the vacuum circuit breaker
1 No. 210A, 33KV, 50HZ, 7KA (3 sec) triple pole totally with-
drawable horizontal isolation type Vacuum Circuit Breaker with
both manual and motor operated mechanism with closing solenoid,
trip button, shunt releases, operating cycle counter, 6 N/O + 6 N/C
contacts, mechanical ON/OFF indicators etc.
2 Nos. 33KV cast resin insulated, double pole potential transformer
having ratio 33000/110V, class 0.5, of 50VA burden (in open delta
connection) for metering and protection.
1 No. of TP MCB for PT secondary protection.
3 Nos. of cast resin insulated 33 KV double core current
transformer having ratio 140/5/5A Core-1, 10VA. Class 0.5M10
Core-2, 15VA, Class 10 P10
1 No. of 0-15KV voltmeter with selector switch
1 No. of 0-140A Ammeter with selector switch
1 No. 3 phase 3 wire, two part time of the day solid state micro-
computer operated digital KWH meter with indicating "PEAK" &
OFF PEAK energy with maximum demand indicator in KW with
integrating time of 30 minutes.
1 No. of synchrous time switch for double tariff operation of KWH
meter
3 Nos. of indicating lamps (ON/OFF/TRIP)
1 No. of panel heater with thermostat
3 Nos of indicating lamp for presence of three phase (R.Y.B.)
1 No. of operating handle.
1 No. of Triple pole solid state micro processor operated IDMT
relay with 2 (two) over current and 1 (one) earth fault protection
element with standard settings.
Outgoing Feeders:
2 nos. outgoing Feeder, each shall be equipped with the following:
1 No. 33KV, 50HZ, 7KA (1 sec.) Triple pole Earthing switch to be
interlocked with Vacuum Circuit Breaker
1 No. of 210A, 33KV, 50Hz, 7KA (3 sec) rupturing capacity,
Tripole, totally withdrawable horizontal isolation type of Vacuum
Circuit Breaker with both manual & motor operated mechanism
with closing solenoid, Trip button, shunt releases, operating cycle
counter, 6 N/O + 6 N/C anxillary contacts, mechanical ON/OFF
indicator etc
1 No. 33KV cast resin insulated, double pole potential transformer
having ratio 33000/110V, class 0.5, of 50VA burden (in open delta
connection) for metering and protection.
3 Nos. of cast resin insulated double core current transformer
having ratio 110/5/5A, Core -1, 10VA, class 0.5M10 Core - 2,
15VA, class 10P10
1 No. of 0-110A Ammeter with selector switch
3 Nos. of indicating lamp for the presence of three phases (R.Y.B.)
3 Nos. of indicating lamp (ON/OFF/TRIP)
1 No. of operating handle
1 No. of Triple pole solid state microprocessor operated IDMT
relay with 2 (two) over current and 1 (one) earth fault protection
element with standard settings
The tripping coil of the circuit breakers shall be activated by a
capacitor storage tripping device without DC (battery) supply
source for trip coil.
4. TRANSFORMER 02 set
Supply, installation, testing and commissioning of following dry
type cast resin, natural air cooled, 3-phase, 50 Hz, 33/0.415KV
indoor type distribution Transformer of DYN 11 vector group having
percentage impedance 4 - 6%, basic impulse insulation level
100KV, HV & LV bushings, complete with two windings , earthing
terminals, temperature sensor with thermometer, lifting lugs, name
plate arranged on tank top, conservator, oil level indicator, drain and filling
valves, bi-directional rollers, with first filling of oil in Transformer etc.
complete as required and suitable for operation at 40 0C ambient
temperature with maximum temperature rise 100 0C, manufactured
and tested in UK/USA/Germany/Japan/France in accordance with
IEC/NEMA /VDE/BSS/JIS standard.
technical Data:
-Rated Capacity : 3150 KVA
-Rated Frequency : 50 Hz
Rated Voltage,
-Primary : 33000 V
-Secondary : 415 V
Rated Current
-Primary : 55.11 A
-Secondary : 4390 A
Vector Group : DYN 11
Off-load tap changer : ± 2.5% , -5%, -7.5%
Ambient Temperature : 40°C
Temperature rise :
- in Oil : 60°C (Max)
- in Coil : 65°C (Max)
Star point brought
out & loadable upto : 100%
Max. service altitude : 1000 Meters
Installation : Indoor
No load losses : 5200 watts (approx.)
Full load losses : 25000 watts (approx.)
Impedance : 6% (approx)
Tolerances, As per IEC 60076 :
Total Losses : + 10% of the total losses
Component losses : + 15% of each component
loss, provided that the tolerance
for total losses is not exceeded
Impedance voltage at rated ± 10% of the declared
current (principal tapping Impedance voltage for that tapping.
Accessories: -
-Silica gel breather
-Dial type thermometer with trip & alarm contact.
-Pressure relief device.
-Buchholz relay with trip & alarm contact.
Outgoing:
1x1000A (50KA), TP MCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release
1 x 1600A, 65KA, Triple pole with fixed type Metal clad Air
Circuit Breaker with motor operated electronic controlled time
dependent selectively operating with built in adjustable overload,
adjustable short circuit protection, under voltage releases and
auxiliary contacts.
1 x 3200A, 65KA, Triple pole fixed type Metal clad Air Circuit
Breaker with motor operated electronic controlled time dependent
selectively operating with built in adjustable overload, adjustable
short circuit protection, under voltage releases and auxillary
contacts.
3x160A (35KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release
Outgoing:
1x320A (35KA), TPMCCB breaker with thermal overload and
instantaneous Electro-magnetic short circuit release
6. P.F.I. PLANT
Supply, installation, testing and commissioning of following 415
volt, 3 phase, 50 Hz power factor improvement plants complete
with TP busbars and earth block micro processor control auto
power factor correction ralay with digital PF reading display,
capacitor bank, contactor, fuse, ON/OFF indiators for every stage
of capacitor bank (except directly connected one) etc. locally
factory assembled in 16 SWG sheet steel clad dust & vermin proof,
free standing, floor mounting, epoxy resin powder coat painted
cabinet. contactors, capacitor bank, relays, discharge resistor, fuse
etc. shall comply MENA/VDE/IEC/JIS/BSS standard and shall be
manufactured in UK/USA/Germany/Japan/France.
9. EARTHING
Earthing the electrical installation with 38.10 mm (1.5") dia G.I.
pipe (earth electrode) having 6.35 mm dia holes across the dia at
305 mm interval securedly bonded with 2 nos. of NO. 2 SWG
HDBC earth lead with washer, nuts, bolts etc. sunk upto
undermentioned depth and protection of earth lead by 20mm mm
(3/4") dia G.I. pipe upto plinth level run at a depth of 609.6 mm (2
ft.) below G.L. upto main board to be earthed including necessary
connecting copper sockets, bolts, nuts including additional vertical
run of 12.7 mm dia G.I. pipe upto G.L. from 609.6 mm (2') depth
with blind socket for water pouring facility etc. complete for
maintaining earth resistance less than 1 ohm.
Depth of bottom of main electrode at 37338 mm. (122.5 ft) from 10 set
GL & length of electrode 36576 mm. (120 ft).
10. Suppling, Fiting and Fixing of single lighting arrester on the top of 10 set
the building 1.22m long 12mm dia GI pipe and clamp with bolts
and 3mm mounted air spike ,Top of the lighting arrester should be
soldered and other fittings required etc.all complete in all respects
as per directions of the E-I-C.
11. Providing and drawing NO.2 SWG HDBC wire through 19mm 450 m
(3/4") dia G.I. pipe including fitting, fixing the G.I. pipe in wall or
column complete as required. The rate includes the supply &
installation of a copper earthing block of size 30"x2.5"x3/4"
(approx. as required) to be installed on sub-station wall using
suitable insulator.
13. GENERATOR
14. The contractor shall be responsible for communicating with the 1 job
local electric supply office and other authority viz. Chief Inspector
of electric lisence board, Govt. of Bangladesh for their
inspection/clearance and sanction of eclectic load, thereof, if any
shall be included in the price of the item. The contractor shall
submit the application for required load sanction and other paper
formalities on behalf of the employer till the sub-station is
commissioned and handed over to the employer. However, the
security deposit money and HT metering panel installation charges
for the proposed sub-station will be directly paid to local electric
supply authority by the employer on submission of deposit slip &
HT metering panel installation charges from the concern office of
local electric supply authority. The contractor will not include in
this item the amount of security deposit money and HT metering
panel installation charges but all other incidental charges.
15. Supply and fixing of following capacities multipurpose ABCE dry
chemical powder stored pressure type with manometer system Fire
Extinguisher suitable for repeated use complete with wall bracket,
CO2 cartridge, easy refilling system etc. as per sample approved by
the Engineer-in-charge.
6 Kg. capacity. 10 eac
Name of works: Supply, installation, testing and commissioning of Fire fighting system for under
construction of Market at Savar, Cantonment board, Dhaka.
Supply, Installation & testing of Horizontal split case Centrifugal Set 1.00
pump Discharge Capacity 1250 USGPM Head 140 M efficiency
60% minimum speed 2960 RPM Automatic and continuous during
occasional use operation 175 BHP Power. Engine with Diesel driven
Pump control panel, soft strainer, main MCCB, first filling of fuel
tank & Additional accessories (Cooling loop, base, drive shaft,
guard, fuel tank and accessories, pump shall be operate on pressure
signal and pressure switch, flex connector and battery set) UL / FM /
CE certified as spd. The components shall be manufactured and
tested in UK/USA/Germany/Japan/France.
necessary tools- Multimeter (voltcraft, m-3850), clamp meter-
266, combination hand & machine box socket tools (300 pcs, etc),
3 Jockey Pump:
a) Supply & Installation of multi-stage vertical turbine pump with Set 1.00
cast iron body, bronze impeller, steel C-40 steel shaft coupled
directly through flexible coupling on a common fabricated MS base
frame to 65 USGPM 15 HP, Head 150 m, TEFC squirrel cage
induction motor suitable for operation on 400/440 volts, 3 phase, 50
Hz. The Electric motor shall be provided with in-built heating
system/arrangements. The pump set shall be complete with
couplings guard, vibration isolation pads (cushy foot) mechanical
seal etc ISO standard including control panel & Additional
accessories as spd.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
4 Fire Hose Cabinet.
Supply & fixing of painting & labeling of fire hose cabinet different Each 68.00
locations. Type: wall mounted recessed type, Material: Mild steel
sheet of 1.5 mm thick operation: Manual swings type rack/cradle, 4
mm thick float glass and hand-key. ‘FIRE HOSE’ written on the
front. Cabinet Size 915 mm x 760 mm x 250 mm. Capacity: Ti
accommodates Inos. 65 mm dia& 30 meter long Hose pipes with
Nozzle. Finishing: Epoxy Powder red paint.
Supply & fixing of fire hose rack with 40 mm dia hose pipe 30 m Each 56.00
length Adopter/coupling including accessories ( nipple, landing
valve, clip, nozzle etc) fire resistant rubber lined material collapsible
type UL/FM/CE certified.
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
Supply & fixing in position 65 mm nominal bore and 30 m long Each 12.00
synthetic fiber, circular woven jacketed, rubberized fabric reinforced
rubber lined (RRL) fire hose pipe of approved make having TAC &
MMD approval with a pair of 65 x 65 mm gunmetal instantaneous
type, heavy duty delivery hose coupling bound to hose coupling with
copper wire, complete type: Collapsible. Material: Fire resistant
synthetic twill. Diameter: 65 mm. Length : 30 m. Accessories:
Adopter/ Coupling etc
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
9 Fire Pillar Hydrant Valve: Supply& fixing of 100 mm diapiller Each 12.00
hydrant 2 way & 65 mm dia side landing valve as spd
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
.
Supply & fixing in position fire brigade inlet connection with CI Each 2.00
body having 4 way Gun metal 65 mm male instantaneous inlets
fitted with built in check valves, gun metal blank caps and chains.
150 mm gun metal flaned outlet, 25 mm nominal bore gun metal
drain valve complete with bolts, nuts, compressed asbestos gasket,
painted in fire red colour including cutting and making good the
walls and floors wherever required
11 Valve and accessories:
12 Glove Valve :
Supply & fixing of Auto Air vent valve, Type Free floating
automatic, and materials cast steel, Accessories: Pad cock. Mounting
accessories The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
17 FOOT VALVE:
Supply & fixing of foot valve type: lift check, Material: Malleable
steel, Pressur rating: PN-16 (minimum), Joints: flagged type.
a) 200 mm dia Each 2.00
b) 65 mm dia Each 1.00
18 Y-STRAINER:
Supply & fixing in position black steel MS pipe bearing code No-40
(Heavy class) complete with fittings (Heavy class) such as Elbows
Bends. Tees, Reducers, Union, Flanges etc welded as required and
clamps, hanger, supports, dash fasteners, bolts, nuts, rubber
insertions/ compressed asbestos gasket etc. Including threading
screwing welding wherever required. cutting and making good the
walls and floors wherever required, complete in all respect. Pipe
works include painting & underground pipe anti –corrosive
treatment.
a) 200 mm dia M 100.00
d) 80 mm dia M 200.00
e) 65 mm dia M 300.00
f) 50 mm dia M 100.00
g) 40 mm dia M 400.00
h) 25 mm dia M 100.00
a. CO2 Type
Supply and fixing of CO2 type fire extinguisher. Consisting of brand Each 300.00
new high pressure steel Cylinder bearing standard mark and having
the approval of explosive controller. Valve, Internal discharge tube,
high pressure discharge hose, non conducting horn, Suspension
bracket, Fully charged fixed with brass screws including cutting and
making good the walls where ever required 5 kg capacity
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
Supply and Installation of addressable fire alarm master panel with Set 2.00
battery power supply and other accessories panel description is
following Microprocessor baded system fire alarm in less than 1 sec.
capcity of 500 addressable device 4 loop intelligent detection
circuits, upto 250 Device per loop 5” LCD Display 320 x 240 DPI
Resolution 15 LED statue indicators UL/FM/CE certified. The
components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
28 Supply & installation of Intelligent photo electric smoke detector as Set 550.00
spd.
29 Supply & Installation of addressable manual Call Point as spd. Set 80.00
34 Supply & fixing of short circuit isolator module as spd. Set 40.00
40 PVC Conduit.
Supply and fixing of following diameter PVC conduit for running
electrical cables from control conduit for running electrical cables
from control console to pumps for operation of the pumps
a) 50 mm dia M 200.00
b) 25 mm dia M 10000
42 Ceiling Speaker
Supply and Installation of Suitable for speech and Flush-mounting in Each 400.00
ceiling cavity Easy to install, Simple power setting Unobtrusive in
virtually all interiors Complies with International installation and
safety Regulations Capacity : 6-9 Watt Maximum power: 9W Sound
pressure level: 94dB/86dB (SPL) Effective frequency range: 80Hz to
18kHz Rated voltage: 100V Rated impedance: 1667 ohm
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
43 Horn Speaker
Supply and Installation of Horn speaker High efficiency drivers Each 10.00
High efficiency drivers, Wide opening angle, Excellent speech
reproduction, Simple power setting, Water and dust protected to IP
65, Versatile mounting bracket, Comply with International
installation and safety regulation Max. Power: 15 W, Rated Power:
10 W (10-5-2.5 W) Effective Frequency range: 480 Hz – 5.5 k Hz
Horizontal: 160 / 50 degree, Vertical: 160/50 degree Rated input
voltage: 100 V Rated Impedance: 1000 ohm Connector: 4-wire
cable,2m long Weight: 1.4 Kg
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
45 BOOSTER AMPLIFIER:
Supply and Installation of Booster Amplifier, Main Voltage: Each 4.00
110VAC-240VAC,50/60Hz, Max Mains Power Consumption: 1600
VA Sensitivity: 100V Impedance: Direct connection to line input
Rated output: 480 W, Max. 720 W Frequency response: 50 Hz-
20,000 Hz Input : 3-pin XLR,6.3mm phone jack, balanced Output:
3-pin XLR,6.3mm phone jack, balanced Impedance: 22 kOhm
Weight: 25 kg The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
46 BGM MUSIC SOURCE:
Supply and Installation of BGM Music Source unit for background Each 1.00
music DVD/CD- player for video and audio Supports MP3, JPEG,
and multi- format video outputs AM/FM tuner with 10 presets and
digital control Simulatances operation of- player and tuner
Combined DVD/CD-Player/tuner output with player priority Remote
Control System Overview Weight: 4.2 Kg
The components shall be manufactured and tested in
UK/USA/Germany/Japan/France.
47 SPEAKER CABLE:
Supply and Installation of Speaker Cable alda brand cable origin (F. Coil 200.00
made)12 GA, water color as spd.
48 ACCESSORIES:
Supply & fixing of Microphone cable (F/Made) Cat-5 & others Set 1.00
1,500 VA UPS as spd.
49 Excavation in any soil upto 1.5 metre depth for Cable and pipe Cum 120.00
tranches as sdp.
Testing, Commissioning, training trial run & balancing of the fire Job 1.00
hydrant. system, fire alarm system and Public address system shall
be carried out as per specification and recommendation of the
manufacturer equipment and relevant fire fighting standard.
Name of works : Supply, installation, testing and commissioning of Power Saving System for under
construction of Market at Savar, Cantonment board, Dhaka.
S.N description unit Qnt. Unit rate amount
.
1. IP FIXED BOX CAMERA : 182 pcs
Click any area and zoom in or zoom out on the image by mouse;
Multi-Language selectable:
2 TB HDD
4.b Supply, installation, testing and commissioning of 40” HD LED monitor, 06 pcs
Brand : Sony/Samsung/Walton/tosiba/rangs
7.d Supplying and fixing of suitable port Switch 4port/8port/16 port/24port 30 Nos.
10/100 Base T(X)
8. 10 kVA Online UPS with minimum 30 minute battery backup With true 01
220V AC (+-1% user selectable)sine wave, Online Double
conversion,0ms Transfer time, Over load capacity of 110% for 1
minute,125% for 15 sec & 150% for 1sec.
Protection Against Low Battery, Short circuit, Surge and Spike
Name of works : Supply, installation, testing and commissioning of solar for under construction of
S.N. description Market at Savar, Cantonment board, Dhaka. unit Qn.t Unit amount
y
1. Solar Panel: Supply, Installation, Testing & commissioning of Solar 30kwp KW
Panel with all necessary fittings. The components shall be P
manufactured and tested in UK/USA/Germany/Japan/France.
2. Inverter/charger with Charge controller: Supply, Installation, Testing 30KW 01
& commissioning of hybrid Bi-Directional charge controller (built-in
MPPT) with all necessary fittings. The components shall be
manufactured and tested in UK/USA/Germany/Japan/France.
3. Storage Battery: Supply, Installation, Testing & commissioning of 200AH 60
Storage of AGM Battery with all necessary fittings. The components
shall be manufactured and tested in UK/USA/Germany/Japan/ France.
4. Supply and installation of DC Combiner Box for PV Array with 01
necessary protection devices. European Standard
5. Supply and installation of AC Disconnect Box for Loads & Grid Input 01
with necessary protection devices. European Standard
6 Supply & installation of steel structure made of hot dip galvanized 01 job
MS Angles for panel, including civil work.
7. Supply and installation of DC & AC Cables (solar cable), as per site 01 job
and system.
8. Supply and installation of System Control Panel for monitoring & 01 Nos.
Controlling all devices for complete functionality of the system.
9. Supply & Installation of Earthling Equipments 01 job
10. Testing & Commissioning of Solar Power System 01 job
Name of works : Supply, installation, testing and commissioning of Plumbing system for under
SI Description Quan Dhaka.
construction of Market at Savar, Cantonment board, Unit Rate Amount
t
1 Supplying, fitting and fixing European type glazed porcelain commode "S" type 465
x 340 x 415 mm in size, approximately 14 kg by weight, plastic seat cover and
preparing the base with cement concrete and with wire mesh or rods, if necessary,
in all floors including making holes wherever required and mending good the
damages and fitting, fixing finishing etc. complete with all necessary fittings and
connection approved and accepted by the Engineer. or BISF (code no- 104/104-
A)/rak
White
105 each
2 Supplying, fitting and fixing European type glazed porcelain low-down, capacity 10
liter, 490 x 190 x 350 mm in size, approximately 14 kg by weight, on walls by
screws and F.I. bar clamps, rowel plugs, making holes wherever required and
mending good the damages and fitting, fixing finishing etc. complete with all
necessary fittings and connection approved and accepted by the Engineer.
White
105 each
3 Supplying, fitting and fixing European type glazed porcelain Combi closet, 700 x
410 x 795 mm in size, approximately 34.5 kg by weight, plastic seat cover and
preparing the base with cement concrete and with wire mesh or rods if necessary,
in all floors including making holes wherever required and mending good the
damages and fitting, fixing, finishing etc. complete with all necessary fittings and
connection approved and accepted by the Engineer. (BISF Item No. 118/418 or
equivalent)/rak
White
50 each
4 Supplying, fitting and fixing Bangladesh pattern 560 x 290 x 270 mm long pan,
approx. 7.1 kg by weight, made of Vitreous China/ BISF/rak and preparing the base
of pan with cement concrete and with wire mesh or rods if necessary in all floors
including making holes wherever required and mending good the damages and
fitting, fixing, finishing etc. complete with all necessary fittings and connection
approved and accepted by the Engineer.
White
40 each
5 Supplying, fitting and fixing white glazed vitreous W/H Wash Basin 580 x 445 x 235
mm size, approx. 14 kg by weight including fitting, fixing the same in position with
heavy type C.I. Brackets. 30 mm dia PVC waste water pipe with brass coupling (not
exceeding 750 mm in length), basin waste with chain plug including making holes in
walls and floors and fitting with wooden blocks, screws and mending good the
damages, finishing etc. all complete approved and accepted by the Engineer.
White
150 each
6 Supplying, fitting and fixing 490 x 385 x 290 mm in size European type glazed
vitreous standing bowl urinal, approx. 8.0 kg by weight including fitting, fixing the
same in position after making holes in walls and floors, providing 32 mm dia plastic
waste pipe with brass coupling up to grading below, 12 mm dia plastic connection
pipe with brass coupling, 12 mm dia brass stop cock including mending good the
damages with cement mortar (1:4) etc. all complete approved and accepted by the
Engineer.
White
85 each
7 Supplying, fitting and fixing of 450 x 350 mm size and 5 mm thick unframed super
quality mirror with hard boards at the back with all necessary fitting including
135 each
making holes in walls and mending good the damages with cement mortar (1:4) etc.
all complete approved and accepted by the Engineer. (Made in Japan or equivalent)
8 Supplying, fitting and fixing super quality 600 x 125 mm white glass (plate) shelf 135 each
having 5 mm thickness with fancy C.P. brackets, screws and frames including
making holes in walls and mending good the damages with cement mortar (1:4) etc.
all complete approved and accepted by the Engineer.
9 Supplying, fitting and fixing super quality C.P. Towel rail of 600 mm long and 20 mm
in dia with C.P. holder including making holes in walls and mending good the
190 each
damages with cement mortar (1:4) etc. all complete approved and accepted by the
Engineer.
10 Supplying, fitting and fixing toilet paper holder of 150 x 150 x 126 mm size including
making holes in walls and mending good the damages with cement mortar (1:4) etc.
130 each
all complete approved and accepted by the Engineer.
11 Supplying, fitting and fixing standard size CP soap tray including making holes in
walls and mending good the damages with cement mortar (1:4) etc. all complete
approved and accepted by the Engineer.
C.P. soap tray
140 each
12 Supplying, fitting and fixing 100 mm dia stainless steel floor grating in traps or in
drains including making holes in walls/floors and mending good the damages with
270 each
cement mortar (1:4) etc. all complete approved and accepted by the Engineer.
12 Supplying 100 mm inside diameter best quality uPVC rain water down pipe fitting,
fixed in position with head and shoes, bends, min.20 mm width F.I. Bar clamp and
nails, and including all accessories such as round grating/domed roof grating 75 rm
bands, sockets approved and accepted by the Engineer.
14 Supplying 50 mm inside dia HCI soil, waste and ventilation pipe each piece having
over length 1800 mm, thickness 6.5mm, spigot diameter 80 mm, weight min 12 kg
fitted and fixed in position with sockets thickness min 8.5 mm, internal depth min 68
mm, bead's outside diameter min 90 mm, ears flange length min 150 mm, caulking
clearance min 10 mm produced in foundry grade pig iron as per BSTI approved 45 rm
manufacturer standard fitting and fixing in position including head and shoes bends
made of minimum 20 mm x 3 mm F.I. bar or equivalent, trap, tee, offset, clamps and
nails etc. complete in all floors approved and accepted by the Engineer.
15 Supplying 100 mm inside dia HCI soil, waste and ventilation pipe each piece having
over length 1800 mm, thickness 6.5 mm, spigot diameter 117 mm, weight min 24.85
kg fitted and fixed in position with sockets thickness min 6.5 mm, internal depth min
75 mm, bead's outside diameter min155 mm, ears flange length min 208 mm,
caulking clearance min 8 mm produced in foundry grade pig iron as per BSTI 30 rm
approved manufacturer standard fitting and fixing in position including head and
shoes bends made of minimum 20 mm x 3 mm F.I. bar or equivalent, trap, tee,
offset, clamps and nails etc. complete in all floors accepted by the Engineer.
16 Supplying 50 mm inside dia best quality uPVC soil, waste and ventilation pipe
having specific gravity 1.35 - 1.45, wall thickness 2.5 - 3.0 mm, and other physical,
chemical, thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards fitted and fixed in position with sockets,
18 rm
bends, of uPVC Pipe with all accessories such as Round grating /domed roof
grating bands, sockets etc. approved and accepted by the Engineer (length: 6000
mm each).
17 Supplying 100 mm inside dia best quality uPVC soil, waste and ventilation pipe
having specific gravity 1.35-1.45, wall thickness 3.4- 4.0 mm, and other physical,
chemical, thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards fitted and fixed in position with sockets,
25 rm
bends, with all accessories such as Round grating/domed roof grating bands,
sockets etc. approved and accepted by the Engineer (length: 6000 mm each).
18 Supplying, fitting and fixing G.I. pipe with all special fittings, such as bends, elbows,
sockets, reducing sockets, Tee, unions, jam-nuts etc. including cutting trenches
where necessary and fitting the same with earth duly rammed and fixing in walls
with holder bats and making hole in floors, walls and consequent mending good the
damages etc. all complete in all respects approved and accepted by the Engineer.
12.5 mm dia G.I. pipe with wall thickness 3.25 mm, outside diameter min 21.1 mm,
60 rm
weight 1.45 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
20 mm dia G.I. Pipe with wall thickness 3.25 mm, outside diameter min 26.6 mm,
55 rm
weight 1.90 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
25 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 33.4 mm,
45 rm
weight 2.97 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
32 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 42.1 mm,
30 rm
weight 3.84 kg/m, can withstand min 50 kg/cm2 hydraulic pressure.
40 mm dia G.I. Pipe with wall thickness 4.05 mm, outside diameter min 48.0 mm,
weight 4.43 kg/m, can withstand min 50 kg/cm2 hydraulic pressure. 35 rm
19 Supplying different inside dia best quality CPVC pressure pipe for water supply
having specific gravity 1.35 - 1.45, and other physical, chemical, thermal, fire
resistivity properties etc. as per BSTI approved manufacturer standards or ASTM,
BS/ISO/IS standards fitted and fixed in position with sockets, bends, with all
accessories such as Round grating/domed roof grating, bends, sockets etc.
approved and accepted by the Engineer. (length: 6000 mm each)
12 mm dia wall thickness 2.8 mm - 3.3 mm 70 rm
19 mm dia wall thickness 2.9 mm - 3.4 mm 45 rm
25 mm dia wall thickness 3.4 mm - 4.0 mm 60 rm
32 mm dia wall thickness 3.6 mm - 4.2 mm 25 rm
37 mm dia wall thickness 3.7 mm - 4.3 mm
20 rm
20 Supplying, fitting and fixing laying Pipes up to depth of invert dia R.C.C pipe having
1.83 meter in length made of stone chips with 40 mm cement joint including all
fittings and specials like plain bend, Tees, reducing sockets, junctions, door bends
cowls, anti-siphon, gasket and cement joints, making holes in walls and mending
good the damages etc. all complete approved and accepted by the Engineer.
R.C.C pipe of 150 mm dia with thickness 40mm 50 rm
R.C.C pipe of 225 mm dia with thickness 40mm 30 rm
R.C.C pipe of 300 mm dia with thickness 50mm 20 rm
R.C.C pipe of 375 mm dia with thickness 50mm
35 rm
21 Supplying, fitting and fixing G.I. Union with sealant etc. complete in all respects
approved and accepted by the Engineer.
12 mm dia G.I. Union 145 each
20 mm dia G.I. Union 120 each
25 mm dia G.I. Union 100 each
32 mm dia G.I. Union 40 each
40 mm dia G.I. Union
25 each
22 Supplying, fitting and fixing best quality G.I. gate valve with sealant etc. complete
approved and accepted by the Engineer.
12 mm brass gate valve 225 each
20 mm brass gate valve 170 each
25 mm brass gate valve 135 each
32 mm brass gate valve 80 each
40 mm brass gate valve 40 each
50 mm brass gate valve 30 each
23 Supplying different inside dia best quality uPVC pressure waste pipe having specific
gravity 1.35 -1.45, wall thickness 2.7 mm - 3.4 mm, and other physical, chemical,
thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM, BS/ISO/IS standards, fitted and fixed in position with sockets,
bends, with all accessories such as Round grating/domed roof grating bands,
sockets etc. complete approved and accepted by the Engineer.
50 mm dia uPVC Y or T - Y Cleanout 55 each
100 mm dia uPVC ‘P’ or ‘S’ trap 40 each
100mm dia Upvc "X" trap 10 each
100mm dia Upvc "U" trap 90 each
100 mm dia uPVC Y or T - Y Cleanout 35 each
24 Supplying, fitting and fixing best quality faucets etc. complete approved and
accepted by the Engineer
12 mm CP bib cock 135 each
12 mm Special quality CP bib cock 220 each
12 mm Plastic bib cock with internal brass thread
50 each
25 Supplying, fitting and fixing best quality concealed fixed sink cock etc. complete
approved and accepted by the Engineer
12 mm CP Concealed fixed cock 20 each
12 mm CP Concealed moving cock
15 each
26 Supplying, fitting and fixing CP Shower Mixture including Shower Head and faucet
with all necessary hardware and consumables approved and accepted by the 10 each
Engineer.
12 mm brass Stop Cock for Surface Mount (general quality)
85 each
27 Supplying, fitting and fixing Special/Fancy quality C.P. concealed/ Surface Angle
stop cock etc. complete approved and accepted by the Engineer.
12 mm CP surface mounted angle stop cock (general) 65 each
28 Supply and installation of 400 gallon capacity Ferro-cement water tank including
necessary hardware, fittings and consumables etc. all complete approved and 35 each
accepted by the Engineer.
29 Supplying, fitting and fixing 12 mm dia, 450 mm long Plastic flexible lead
(connection) pipe approved and accepted by the Engineer. 75 each
30 Construction and placing of R.C.C inspection pit cover (slab) with supplying and
provisions for placing, fitting, fixing 450 mm dia C.I. Man-hole cover with locking/un-
locking arrangement including concrete (1:2:4) with approx. 1% re-enforcement,
necessary earth cutting, or cleaning, side filling, curing etc. with minimum 12 mm
cement plaster (1:4) and neat cement finishing on edges and top all complete and
accepted by the Engineer.
950 x 950 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 20 each
1025 x 1025 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 12 each
1100 x 1100 x 75 mm R.C.C. pit cover with 450 mm dia C.I. manhole cover. 6 each
01 set tools for plumbing (300 pcs, etc),
31. 01 set