Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Industrial
Emission Standards
Emissions China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA
Equivalent
General
Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
Bore 110 mm (4.33 in)
Stroke 127 mm (5.0 in)
Displacement 7.2 L (442 in³)
Aspiration Turbocharged Aftercooled (TA)
Compression Ratio 16.2:1
Combustion System Direct Injection
Rotation (from flywheel end) Counterclockwise
SS-9253180-18396308-016 SS Page 1 of 5
Standard Equipment
Air Inlet System
• Turbocharged
• Air-to-Air Aftercooled
Control System
• Electronic governing, PTO speed control
• Programmable ratings
• Automatic altitude compensation
• Power compensation for fuel temperature
• Programmable low and high idle and total engine limit
• Electronic diagnostics and fault logging
• Engine monitoring system SAE J1939 broadcast and control
• ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
• Thermostats and housing, vertical outlet
• Jacket water pump, centrifugal
• Water pump, inlet
Exhaust System
SS-9253180-18396308-016 SS Page 2 of 5
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their
respective logos, ADEM, EUI, S•O•S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well
as corporate and product identity used herein, are trademarks of Caterpillar and may not be used
without permission.
SS-9253180-18396308-016 SS Page 3 of 5
Rating Type: IND-D RATING Emissions: U.S. EPA Tier 3 Nonroad Equivalent Emission
Standards (Not Currently EPA Certified)
C7 ACERT
DITA
224 bkW (300 bhp) @ 2200 rpm
Metric English
General Engine
Power Rating 224 kW 300 hp
Number of Cylinders 6
Bore 110 mm 4.3 in
Stroke 127 mm 5.0 in
Displacement 7.2 L 442.0 cu in.
Compression Ratio 16.5 : 1
IND-D RATING:For service where maximum power is required for Diesel Engines — up to 7.1 liter All rating conditions are
periodic overloads (time at full load not to exceed 10% of the duty based on ISO/TR14396, inlet air standard conditions with a
cycle). total barometric pressure of 100 kPa (29.5 in Hg), with a
vapor pressure of 1 kPa (.295 in Hg), and 25°C (77°F).
Performance measured using fuel to EPA specifications in
40 CFR Part 1065 and EU specifications in Directive
97/68/EC with a density of 0.845-0.850 kg/L @ 15°C (59°F)
and fuel inlet temperature 40°C (104°F).
SS-9253180-18396308-016 SS Page 4 of 5
TSS-DM9223-04-VS-IND-9253180.pdf © 2016 Caterpillar All Rights Reserved Page 1 of 2
INDUSTRIAL - Technical Spec Sheet
AGRICULTURE, CONSTRUCTION, FORESTRY, GENERAL INDUSTRIAL, MATERIAL
HANDLING, MINING
C7 ACERT
224 bkW (300 bhp) @ 2200 rpm
Rating Type: IND-D RATING Emissions: U.S. EPA Tier 3 Nonroad Equivalent Emission
Standards (Not Currently EPA Certified)
Engine Engine
Engine Speed Power Power Torque Torque
rpm bkW bhp N*m lb-ft
2200 224 300 972 717
2100 224 300 1019 751
2000 219 293 1043 769
1900 213 286 1072 791
1800 208 279 1103 814
1700 203 272 1139 840
1600 198 266 1184 873
1500 192 258 1225 903
1400 187 251 1274 940
1300 173 232 1271 937
1200 156 209 1240 914
1100 128 172 1113 821
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective
logos, ADEM, EUI, S•O•S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate
and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
SS-9253180-18396308-016 SS Page 5 of 5
TSS-DM9223-04-VS-IND-9253180.pdf © 2016 Caterpillar All Rights Reserved Page 2 of 2