1) Find the maximum phase deviation and frequency deviation of an
angle modulated signal: s (t ) 10 cos[2 10 5 t 5sin 2000 t ] .
2) Write FM equation with the following properties: f c 10 6 Hz,
m(t ) 4 cos 200 t . The frequency deviation constant is 500 rad/sec/volt
and the power of the FM signal is 50 W. Determine the bandwidth of the FM signal based on (i) frequency deviation, (ii) Carson's rule.
3) A message signal 2 cos 2600 t is angle modulated.
(i) Determine the peak phase deviation and modulation index of PM modulator with a deviation sensitivity 2.5 rad/V. (ii) Determine the peak frequency deviation and modulation index for an FM modulator with a deviation sensitivity 5kHz/V.
4) Consider a modulating signal 2sin 2 103 t is used to modulate a carrier
of frequency 106 Hz. Find the bandwidth for (i) Phase modulation, (ii) frequency modulation, (iii) when the modulating frequency is doubled, Use p 10 and
f 10 units.
5) A NBFM signal s NBFM (t ) 10 cos[2 10 5 t 0.18sin 2000 t ] is applied to a
frequency multiplier by a factor of 20. Write the mathematical
K.Ramakrishnan College of Engineering (Autonomous), Samayapuram, Trichy-621112 Department of Electronics and Communication Engineering EC8491 Communication Theory