Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3. Set
1. Time / Date 2. Port Control 3. SLC Devices
1. Set Time
1. RS232 A *
1. Device Address Change 2. Det Sen / AAM Conf. 3. Registration
1. AM / PM
Set Loop Device Address Device Registration
1: PRINTER 2: IIM (FUTURE) Present Loop Device Address*_ _
System Time (AM / PM 1 - 12 Hrs) (1 - 255) SLC Devices From *_ _ to _ _ _ (1 - 255)
3: ICM 0: NOT USED * Set Target Loop Address *_ _ 1. Ionization 2. Photoelectric 3 Thermal 4 Alarmline
Enter the Time *_:_ _ (HH:MM) (1 - 255)
4. De-Registration
1. Alarm 1. Alarm Set Detector Sensitivity Set AAM Configuration
1: AM 2: PM * SLC Devices From *_ _ to _ _ _ (1 - 255) SLC Devices From *_ _ to _ _ _ (1 - 255)
2. RS232 B * Device De-Registration
1. Fixed Settings 1. Fixed Settings
SLC Devices From *_ _ to _ _ _ (1 - 255)
Set Detector Sensitivity Set AAM Configuration
2. Military Set Detector Sensitivity Set Detector Sensitivity 1: 50 Ft. * Switch Setting 1 to 16 *_
1: PRINTER 2: IIM (FUTURE) SLC Devices From * _ _ to _ _ _ (1 - 255) SLC Devices From * _ _ to _ _ _ (1 - 255) 5. Blink Control
3: ICM 0: NOT USED *
Set Time (Mil 1 - 24 Hrs))
Enter the Time *_:_ _ (HH:MM) Set Detector Sensitivity Set Detector Sensitivity Set Detector Sensitivity Set AAM Configuration Program Device Blink Control
1: Open Area 2: In Duct 3: DH-2000 * 1: Open Area 2: In Duct 3: DH-2000 * Pre-Alarm Level *__ (80 - 154) Pre-Alarm 1: ON 2: OFF * SLC Devices From *_ _ to _ _ _ (1 - 255)
2. Set Date
Set Detector Sensitivity Set Detector Sensitivity Set Detector Sensitivity Set AAM Configuration Set Blink Control
Pre-Alarm Level *._ (0.5 - 1.4) %/Ft. Pre-Alarm Level *._ (0.2 - 3.4) %/Ft. Alarm Level *__ (135 - 155) Alarm 1: Normal 2: Overheat * 1: Blink Off 2: Blink On
Set Date
Enter the Date *_-__-
__ (MM-DD-YY)
Set Detector Sensitivity Set Detector Sensitivity
Set Detector Sensitivity
Alarm Level *._ (0.5 - 1.5) %/Ft. Alarm Level *._ (0.5 - 3.5) %/Ft.
2: 70 Ft. *
3. Battery
2. Day/Night Settings 2. Day/Night Settings
Set Detector Sensitivity
Set Detector Sensitivity Set Detector Sensitivity Pre-Alarm Level *__ (80 - 144)
1: Batt Disp Enable2: Batt Disp Disable *
SLC Devices From * _ _ to _ _ _ (1 - 255) SLC Devices From * _ _ to _ _ _ (1 - 255)
2. Supervisory 2. Supervisory
6. Network 8. HSDs
4. Programming 5. Globals 7. Control Modules 9. Disable Battery
(Future) (Future)
4: Central Station
8. Clear Tests
Nighttime Settings on Weekend
1. Activate 2. De-Activate * Central Station Operation 3. Reset ATM / RDCM
1. Clear SLC Tests * Activate - (1) Deactivate - (0) *