Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.muellerflow.com
Anvil-Strut
Price Sheet AS.06.10C | Effective: June 28, 2010
FREIGHT ALLOWANCE:
All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; Alberta;
Quebec or freight equalized thereon; with full freight allowed on 1,000 lbs. or
$1,500 to recognized delivery points in Canada. All shipments will be made from
the nearest distribution centre via the least expensive mode, unless otherwise
instructed. Whenever a buyer selects a more expensive method for shipment, or
alternate distribution centre, the difference in transportation costs will be for the
buyer’s account.
NOTE:
• All orders are accepted on the basis of prices in effect at the time of shipment.
• On orders recieved for cartoned items in less than “carton (not container)
quantities, “we reserve the right to adjust to the next carton quantity above the
number of pieces shown on the order.
NOTICE:
To the prices and terms quoted, there will be added any manufacturers or sales
tax payable on the transaction under any effective statute.
GENERAL
• Upc numbers and SPIN commodity identification numbers are
available upon request.
• To obtain current ISO certifications, listings, and other approvals, visit Anvil’s
Web site at www.anvilintl.com.
• Pricing is subject to change without notice. Go to Anvil’s Web site for the most
current list price information, or contact your local Anvil representative.
www.anvilintl.ca
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
2. DELIVERY: Claims for products damaged or lost in transit should be made on the
carrier, as Seller’s responsibility ceases, and title passes, on delivery to the
Seller will make every effort to complete delivery of products as indicated
carrier.
on Seller’s acceptance of an order, but Seller assumes no responsibility or
liability, and will accept no backcharge, for loss or damage due to delay or
inability to deliver caused by acts of God, war, labor difficulties, accident, 7. SPECIAL PRODUCTS:
delays of carriers, by contractors or suppliers, inability to obtain materials, Orders covering special or nonSTD. products are not subject to
shortages of fuel and energy, or any other causes of any kind whatever cancellation except on such terms as Seller may specify on application.
beyond the control of Seller. Seller may terminate any contract of sale of
its products without liability of any nature, by written notice to Buyer, in 8. PRICES AND DESIGNS:
the event that the delay in delivery or performance resulting from any of
Prices and designs are subject to change without notice. All prices are
the aforesaid causes shall continue for a period of sixty (60) days. Under
F.O.B. point of shipment, unless otherwise stated.
no circumstances shall Seller be liable for any special or consequential
damages or for loss, damage or expense (whether or not based on
negligence) directly or indirectly arising from delays or failure to give notice 9. TAXES:
of delay. The amount of any sales, excise or other taxes, if any, applicable to
the products covered by this order, shall be paid by Buyer unless Buyer
3. WARRANTY: provides Seller with an exemption certificate acceptance to the taxing
authorities.
Seller warrants for one year from the date of shipment Seller’s
manufactured products to the extent that Seller will replace those having
defects in material or workmanship when used for the purpose and in the 10. NUCLEAR PLANTS:
manner that Seller recommends. If Seller examination shall disclose to its Where the products, engineering design or fabrication is for nuclear
satisfaction that the products are defective, and an adjustment is required, plant applications. Buyer agrees (a) to take all necessary steps to add
the amount of such adjustment shall not exceed the net sales price of Seller as an insured under the American Nuclear Insurers’ (ANI) pool and
the defective products only and no allowance will be made for labor or under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property
expense of repairing or replacing defective products or workmanship damage and liability insurance and if necessary steps could have been
of damage resulting from the same. Seller warrants the products it sells taken, but are not taken, Buyer shall hold Seller harmless against all such
of other manufacturers to the extent of the warranties of their respective losses which could have been thus covered; (b) Buyer agrees to hold
makers. Where engineering design or fabrication work is supplied. Buyer’s Seller harmless with respect to any personal injury (or death), property
acceptance of Seller’s design or of delivery of work shall relieve Seller of all damage or other loss in a nuclear incident which is caused directly or
further obligation, other than expressed in Seller’s product warranty. THIS indirectly by defective design, material, workmanship furnished by Buyer
IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY (or which could be so covered but with respect to which Buyer has elected
OF ANY KIND, EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES to self-insure), and further agrees to waive subrogation by its carriers of
OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH such insurance against Seller; and (c) as to nuclear hazards for which
EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED Buyer cannot obtain insurance coverage, the liability of Seller for any
BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither personal injury (or death), property damage or other loss directly caused
assumes, nor authorizes any person to assume for it, any other obligation by defective design, material, or workmanship furnished by Seller shall
in connection with the sale of its engineering designs or products. This not exceed the value at the time of the loss occurrence.
warranty shall not apply to any products or parts of products which (a)
have been repaired or altered outside of Seller’s factory, in any manner; 11. MINIMUM INVOICE:
(b) have been subjected to misuse, negligence or accidents; (c) have been
used in a manner contrary to Seller’s instructions or recommendations. Domestic: $100 plus transportation.
Seller shall not be responsible for design errors due to inaccurate or International: $500 plus transportation.
incomplete information supplied by Buyer or its representatives.
12. TERMS:
4. SELLER’S LIABILITY: Cash, net 30 days unless otherwise specified.
Seller will not be liable for any loss, damage, cost of repairs, incidental or
consequential damages of any kind, whether based upon warranty (except NOTE: All orders are accepted on the basis of prices in effect at the time
for the obligation accepted by Seller under “Warranty” above), contract or of shipment.
negligence, arising in connection with the design, manufacture, sale, use or
repair of the products or of the engineering designs supplied to Buyer. NOTICE: The prices and terms quoted, there will be added any
manufacturers or sales tax payable on the transaction under any effective
statute.
5. RETURNS:
Seller cannot accept return of any products unless its written permission FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On
has been first obtained, in which case same will be credited subject to shipments weighing 2,500 pounds or more, rail freight or motor freight
the following (a) All material returned must, on its arrival at Seller’s Plant, at the lowest published rate, is allowed to all continental U.S. rail points
be found to be in first-class condition; if not, cost of putting in saleable or all U.S. highway points listed in published tariffs (Alaska and Hawaii
condition will be deducted from credit memoranda; (b) A handling charge excluded). In no case will more than actual freight be allowed. Shipments
deduction of twenty percent (20%) will be made from all credit memoranda (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will
issued for material returned; (c) transportation charges, if not prepaid, will be invoiced for freight costs at the applicable published class, exception
be deducted from credit memoranda. or commodity rate(s) or charge(s). Anvil reserves the right to select the
carrier for all shipments.
Revised: www.anvilintl.ca 2
Table of Contents
PRODUCT CODES
CODE PRODUCT CATEGORY
AA Channels
A 1100, 1100AS, 1200, 619,
Cushion Clamps, ASNS, ASRS
B Other Pipe Clamps
C Channel Nuts
D General Fittings
Hardware
E Concrete Inserts
F Klo-Shure®
Pictorial Index
CHANNELS
Size: 1⁵/₈" x 3¹/₄" x 12 GA. Size: 1⁵/₈" x 3¹/₄" x 12 GA. Size: 1⁵/₈" x 3¹/₄" x 12 GA. Size: 1⁵/₈" x 3¹/₄" x 12 GA. Size: 1⁵/₈" x 3¹/₄" x 12 GA. Size: 1⁵/₈" x 6¹/₂" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers Two Pcs. AS 100 Welded
on 2" Centers. Back-to-Back.
Page 14 Page 14 Page 14 Page 14 Page 14 Page 14
Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 GA. Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 GA. Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 GA. Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 GA. Size: 1⁵/₈" x 2 ⁷/₁₆" x 12 GA. Size: 1⁵/₈" x 4⁷/₈" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers Two Pcs. AS 150 Welded
on 2" Centers. Back-to-Back.
Page 14 Page 14 Page 14 Page 14 Page 14 Page 14
Size: 1⁵/₈" x 1⁵/₈" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers ⁹/₁₆" Holes on all three sides are
on 2" Centers. on 1⁷/₈" Centers.
Page 15 Page 15 Page 15 Page 15 Page 15 Page 15
Size: 1⁵/₈" x 3 ¹/₄" x 12 GA. Size: 1⁵/₈" x 3 ¹/₄" x 12 GA. Size: 1⁵/₈" x 3 ¹/₄" x 12 GA. Size: 1⁵/₈" x 3 ¹/₄" x 12 GA. Size: 1⁵/₈" x 3 ¹/₄" x 12 GA. Size: 1⁵/₈" x 4⁷/₈" x 12 GA.
Two Pcs. AS 200 Welded Two Pcs. AS 200 Welded Two Pcs. AS 200 Welded Two Pcs. AS 200 Welded Three Pcs. AS 200 Welded Three Pcs. AS 200 Welded.
Back-to-Back. Back-to-Back. Side-to-Back. Side-to-Opposite Side. Side-to-Side.
Page 15 Page 15 Page 15 Page 15 Page 15 Page 15
Size: 1⁵/₈" x 1⁵/₈" x 14 GA. Size: 1⁵/₈" x 1⁵/₈" x 14 GA. Size: 1⁵/₈" x 1⁵/₈" x 14 GA. Size: 1⁵/₈" x 1⁵/₈" x 14 GA. Size: 1⁵/₈" x 1⁵/₈" x 14 GA. Size: 1⁵/₈" x 3¹/₄" x 14 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers Two Pcs. AS 210 Welded
on 2" Centers. Back-to-Back.
Page 16 Page 16 Page 16 Page 16 Page 16 Page 16
Revised: www.anvilintl.ca 4
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
CHANNELS (continued)
Size: 1⁵/₈" x 1³/₈" x 12 GA. Size: 1⁵/₈" x 1³/₈" x 12 GA. Size: 1⁵/₈" x 1³/₈" x 12 GA. Size: 1⁵/₈" x 1³/₈" x 12 GA. Size: 1⁵/₈" x 1³/₈" x 12 GA. Size: 1⁵/₈" x 2 ³/₄" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers Two Pcs. AS 300 Welded
on 2" Centers. Back-to-Back.
Page 16 Page 16 Page 16 Page 16 Page 16 Page 16
Size: 1⁵/₈" x 1" x 12 GA. Size: 1⁵/₈" x 1" x 12 GA. Size: 1⁵/₈" x 1" x 12 GA. Size: 1⁵/₈" x 1" x 12 GA. Size: 1⁵/₈" x 1" x 12 GA. Size: 1⁵/₈" x 2" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁷/₈" Knock Outs on 6" Centers. ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers Two Pcs. AS 400 Welded
on 2" Centers. Back-to-Back.
Page 17 Page 17 Page 17 Page 17 Page 17 Page 17
Size: 1⁵/₈" x ¹³/₁₆" x 14 GA. Size: 1⁵/₈" x ¹³/₁₆" x 14 GA. Size: 1⁵/₈" x ¹³/₁₆" x 14 GA. Size: 1⁵/₈" x ¹³/₁₆" x 14 GA. Size: 1⁵/₈" x 1⁵/₈" x 14 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers. Two Pcs. AS 500 Welded
on 2" Centers. Back-to-Back.
Page 17 Page 17 Page 17 Page 17 Page 17
Size: 1⁵/₈" x ¹³/₁₆" x 12 GA. Size: 1⁵/₈" x ¹³/₁₆" x 12 GA. Size: 1⁵/₈" x ¹³/₁₆" x 12 GA. Size: 1⁵/₈" x ¹³/₁₆" x 12 GA. Size: 1⁵/₈" x 1⁵/₈" x 12 GA.
⁹/₁₆" x 1¹/₈" Elongated Holes ⁹/₁₆" Holes on 1⁷/₈" Centers. ¹³/₃₂" x 3" Slots on 4" Centers. Two Pcs. AS 520 Welded
on 2" Centers. Back-to-Back.
Page 18 Page 18 Page 18 Page 18 Page 18
Size: 1⁵/₈" x ¹³/₁₆" x 16 GA. Size: 1⁵/₈" x ¹³/₁₆" x 16 GA. For all 1⁵/₈" Width Channels. For all 1⁵/₈" Width Channels.
⁹/₁₆" x 1¹/₈" Elongated Holes (10' Length) (10' Length)
on 2" Centers.
Page 18 Page 18 Page 18 Page 18
Revised: www.anvilintl.ca 5
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
CHANNEL NUTS
AS NS AS SS AS RS AS LS AS TG AS 517
Clamping Nut Clamping Nut with Clamping Nut with Clamping Nut with Top Grip Nut with
Stud Nut with RS Spring
without Spring Short Spring Regular Spring Long Spring Spring on Top
Use with all 1⁵/₈" wide channel Use with AS 400 and AS 500 Use with AS 200, AS 210 and Use with AS 100 & AS 150 Use with all 1⁵/₈" wide channel
AS 300
Page 19 Page 19 Page 19 Page 19 Page 20 Page 20
CHANNEL HARDWARE
AS 855 1 - Use with AS 200 Safety Anchor Strap AS 871 Safety Anchor Strap AS 871
and AS 210 sold separately sold separately
AS 855 2 - Use with AS 500
Page 27 Page 27 Page 27 Page 32 Page 32 Page 32
Revised: www.anvilintl.ca 6
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
Includes Cup Point Set Screw. Includes Set Screw. Use with AS 2622 Beam Clamp
Page 32 Page 33 Page 35 Page 38 Page 39 Page 40
AS 2657
Double "U" Bolt
Beam Clamp
Page 40
PLATES
AS 631 Fig. 644 Fig. 629 Fig. 645 Fig. 616 AS 646
Two Hole Splice Clevis Two Hole Splice Clevis Three Hole Splice Clevis Three Hole Splice Clevis Four Hole Splice Clevis Four Hole Splice Clevis
Use with AS 200 & AS 210 Use with AS 500 & AS 520 Use with AS 200 & AS 210 Use with AS 500 & AS 520 Use with AS 200 & AS 210 Use with AS 500
Page 25 Page 25 Page 25 Page 25 Page 24 Page 25
"U" SUPPORTS
Use with AS 200, AS 210 and Use with AS 100, AS 200BTB Use with AS 300 Use with AS 500 & AS 520 Use with AS 400
AS 500BTB and AS 210BTB
Page 24 Page 27 Page 28 Page 34 Page 34 Page 35
Revised: www.anvilintl.ca 7
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
Use with AS 150 Use with AS 200 & AS 210. IUse with AS 100, AS 200BTB Use with AS 150BTB Use with AS 200 & AS 210 Use with AS 200BTB
and AS 210BTB
Page 39 Page 27 Page 28 Page 27 Page 29 Page 29
"Z" SUPPORTS
Revised: www.anvilintl.ca 8
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
AS 825 RH/LH AS 838 RH/LH AS 926 AS 2404 thru AS 2408 AS 2421 AS 2422
Pipe Axle Support 6" thru 30" Shelf Bracket Strut Brace Wall Ladder Bracket 45˚ Stair Tread Support 34½˚ Stair Tread Support
Revised: www.anvilintl.ca 9
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
BRACKETS (continued)
Use with all 3¼" Channels Use with all 3¼" Channels
Page 41 Page 41 Page 42
TROLLEYS & ACCESSORIES
DISCONT DISCONT
INUED INUED
Revised: www.anvilintl.ca 10
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
Now only offered in Now only offered in Now only offered in Now only offered in
Pre-Assembled Pre-Assembled Pre-Assembled Pre-Assembled
DISCONT
INUED
DISCONT
INUED
Revised: www.anvilintl.ca 11
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
AS 2511 AS 6153
End Cap with Knockout Safety End Cap
AS NS SS/ZTC AS RS SS/ZTC AS 3500 ZTC AS 619 SS/ZTC AS 601 ZTC AS 602 ZTC
Clamping Nut Clamping Nut
Seismic Rod Stiffener Square Washer Two Hole Splice Plate Three Hole Splice Plate
without Spring with Regular Spring
Use with AS 200,
Use with all 1⁵/₈" wide channel
AS 210 and AS 300
Page 58 Page 58 Page 63 Page 59 Page 58 Page 58
AS 712 ZTC AS 714 ZTC AS 718 ZTC AS 888 ZTC AS 616 ZTC AS 613 ZTC
Cross Plate "T" Plate Flat Angle Plate Four Hole Splice Plate Four Hole Splice Clevis "U" Support
Use with AS 200, AS 210 and
Use with AS 200 & AS 210
AS 500BTB
Page 60 Page 60 Page 60 Page 60 Page 58 Page 58
Revised: www.anvilintl.ca 12
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
SPECIALTY STRUT (Stainless Steel • Zinc Trivalent Chromium • Hot Dipped Galvanized) continued
AS 679 ZTC AS 929 ZTC AS 611 ZTC AS 928 ZTC AS 603 ZTC AS 604 ZTC
"U" Support "U" Support "Z" Support "Z" Support Two Hole End Angle Two Hole Corner Angle
AS 624 ZTC AS 633 ZTC AS 605 ZTC AS 606 ZTC AS 607 ZTC AS 720 ZTC
Two Hole Closed Two Hole Open RH & LH Angle
Three Hole Corner Angle Three Hole Corner Angle Four Hole Corner Angle
Angle Connector Angle Connector Plate Connector
AS 922 RH & LH ZTC AS 665 ZTC AS 923 ZTC AS 666 ZTC AS 821 ZTC AS 667 ZTC
Two Hole Single Corner Four Hole Double Five Hole Two Six Hole Double Eight Hole Double Eight Hole Double
Angle Connector Corner Connector Angle Connector Corner Connector Angle Connector Corner Connector
AS 913 ZTC AS 668 ZTC AS 669 ZTC AS 651 ZTC AS 809 ZTC AS 3373 ZTC
Ten Hole Two Angle Six Hole Three Twelve Hole Three Angle
Reversible Strut Bracket Double Channel Bracket Universal Angle Bracket
Clevis Connector Angle Connector Clevis Connector
AS 3033 ZTC AS 3064 ZTC AS 2651 ZTC AS 1100 SS/ZTC AS 1200 SS/ZTC
Post Base Double Column Post Base Beam Clamp Rigid Steel Conduit Clamps O.D. Tubing Clamp
Use with AS 200 and Now only offered in Now only offered in
Use with all 3¹/₄" Channels
AS 210 Channel Pre-Assembled Pre-Assembled
Page 63 Page 63 Page 63 Page 61 Page 62
Revised: www.anvilintl.ca 13
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 100 Channel
15⁄8" x 31⁄4" x 12 Ga. unless otherwise noted.
(1) 15⁄8" x 61⁄2" x 12 Ga.
AS 150 Channel
15⁄8" x 27⁄16" x 12 Ga. unless otherwise noted.
(1) 15⁄8" x 47⁄8" x 12 Ga.
www.anvilintl.ca 14
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 200 Channel
15⁄8" x 15⁄8" x 12 Ga. unless
otherwise noted.
(1) 15⁄8" x 31⁄4" x 12 Ga.
unless otherwise noted.
AS 200 AS 200EH AS 200H AS 200S AS 200KO AS 200BTB AS 200BTS AS 200STS AS 200STSR
▲For Stainless Steel, Zinc Tri-valent Chromium and Hot Dipped Galvanized, refer to page 57 in the Specialty Strut Section.
www.anvilintl.ca 15
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 210 Channel
15⁄8" x 15⁄8" x 14 Ga. unless otherwise noted.
(1) 15⁄8" x 31⁄4" x 14 Ga.
AS 300 Channel
15⁄8" x 13⁄8" x 12 Ga. unless otherwise noted.
(1) 15⁄8" x 23⁄4" x 12 Ga.
www.anvilintl.ca 16
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 400 Channel
15⁄8" x 1" x 12 Ga. unless otherwise noted.
(1) 15⁄8" x 2" x 12 Ga.
AS 500 Channel
15⁄8" x 13⁄16" x 14 Ga. unless otherwise noted.
(1) 15⁄8" x 15⁄8" x 14 Ga.
www.anvilintl.ca 17
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 520 Channel
15⁄8" x 13⁄16" x 12 Ga. unless otherwise noted.
(1) 15⁄8" x 15⁄8" x 12 Ga.
AS 560 Channel
15⁄8" x 13⁄16" x 16 Ga. unless otherwise noted.
AS 560 AS 560EH
AS 707 AS 707P
www.anvilintl.ca 18
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel nuts & hardware
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
clamping Nuts
AS LS AS NS AS RS AS SS
www.anvilintl.ca 19
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel nuts & hardware
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Nuts
AS TG AS 517 AS 3281
Hexagon Nut
AS 83
www.anvilintl.ca 20
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel nuts & hardware
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Rods
AS 203
AS 3500
www.anvilintl.ca 21
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
channel nuts & hardware
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
www.anvilintl.ca 22
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
A AS 85
Clamps
www.anvilintl.ca 23
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Supports
A
A
Square Washers
AS 619
www.anvilintl.ca 24
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
A
A
AS 620 AS 624 AS 629 AS 631 AS 633 AS 644 AS 645 AS 646
Reversible Strut
AS 651
www.anvilintl.ca 25
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 655, AS 656
Strut Brackets
AS 661 T1 AS 661 T2
A A
(1)
Uniform Per 100 Pieces Discount
Description Part No. A Std. Pkg.
Load Weight GR Code
Strut Bracket (Slot Up) AS 661 T1 6" 1600 BULK 191.00 $8,156.50 D
Strut Bracket (Slot Up) AS 661 T1 12" 800 BULK 292.00 $6,015.70 D
Strut Bracket (Slot Up) AS 661 T1 18" 600 BULK 436.00 $12,109.90 D
Strut Bracket (Slot Up) AS 661 T1 24" 450 BULK 536.00 $8,995.80 D
Strut Bracket (Slot Down) AS 661 T2 6" 1600 BULK 191.00 $4,030.80 D
Strut Bracket (Slot Down) AS 661 T2 12" 800 BULK 292.00 $4,982.40 D
Strut Bracket (Slot Down) AS 661 T2 18" 600 BULK 436.00 $7,495.90 D
Strut Bracket (Slot Down) AS 661 T2 24" 450 BULK 536.00 $7,450.20 D
(1) Mounted on 12 Ga. Channel
Connectors
www.anvilintl.ca 26
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Supports
Clamps
AS 687 AS 689
A
C to C C to C
A
www.anvilintl.ca 27
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 708 AS 710 AS 711 AS 712 AS 714 AS 715 AS 718 AS 719 AS 720 AS 721
Shelf Bracket
B
AS 732
www.anvilintl.ca 28
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Supports
AS 733 AS 735
Connectors
C to End
AS 763, AS 764
www.anvilintl.ca 29
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Angle Connectors
AS 781 AS 793
AS 806
www.anvilintl.ca 30
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
2"
A
A
B C
1"
A
AS 809 AS 821 AS 825 AS 838
www.anvilintl.ca 31
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 871
AS 888
www.anvilintl.ca 32
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
A
AS 901, AS 902
A
D
AS 907
AS 921 AS 926
A A
www.anvilintl.ca 33
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Supports
A A
AS 928 AS 929
AS 930
A A
AS 978 AS 993
www.anvilintl.ca 34
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
A
D
AS 998
AS 2064
Connectors
AS 2119 A AS 2144
A
www.anvilintl.ca 35
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
A B
A
AS 2401 – AS 2403 AS 2404 – AS 2408 AS 2421 AS 2422
Square Washers
AS 2504
A AS 2511
www.anvilintl.ca 36
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 2520
Trolleys
AS 2545
AS 2560, AS 2561
www.anvilintl.ca 37
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 2580
“Z” Support
AS 2601
Swivel Adapter
AS 2623
Spacer Clevis
7
⁄ " Dia.
7/8" Dia.
8
2"
2"
4" 121/32"
AS 2627
www.anvilintl.ca 38
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Hangers
AS 2631
“U” Supports
AS 2648
Beam Clamp
AS 2651
Column Attachment
AS 2654
www.anvilintl.ca 39
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Beam Clamps
AS 2656 AS 2657
Post Bases
www.anvilintl.ca 40
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Connectors
AS 3049 AS 3060
AS 3064
AS 3164 AS 3373
www.anvilintl.ca 41
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
fittings
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 6153
Adjustable Base
AS 9400
Hinge Connectors
www.anvilintl.ca 42
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 51
Conduit Clamp
AS 270
www.anvilintl.ca 43
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 815 6-16
www.anvilintl.ca 44
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
www.anvilintl.ca 45
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
www.anvilintl.ca 46
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 1450
www.anvilintl.ca 47
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Roller Supports
AS 3101–AS 3115
www.anvilintl.ca 48
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 3126
AS 3138
www.anvilintl.ca 49
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Cushion Strip
AS 3792
AS 004OD–AS 106P
Pipe Series
www.anvilintl.ca 50
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
pipe & conduit support
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 004OD–AS 106P
Tube Series
www.anvilintl.ca 51
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
klo-shure®
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
B
A
thickness
www.anvilintl.ca 52
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
klo-shure®
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Revised: April 2010 For technical data refer to the Anvil Strut Engineering Catalog.
Note: Klo-Shure® ID equals copper tube OD. Chart indicates coupling sizes currently available from Klo-Shure®. Service temperature -65°F to 275°F.
www.anvilintl.ca 53
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
klo-shure®
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Klo-Shure® Strut Mounted Insulation Couplings with Non Metallic Strut Clamp
Klo-Shure® lock top Strut Mounted parts include the Klo-Shure® Coupling
halves with non metal clamps. Used by permission.
Note: Klo-Shure® ID equals copper tube OD. Chart indicates coupling sizes currently available from Klo-Shure®. Service temperature -65°F to 275°F.
www.anvilintl.ca 54
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
concrete inserts
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Concrete Inserts
Closure Strip
A
AS 349 End Cap AS 449
Continuous Concrete Insert with AS 349 CS/EC 10 A 15⁄8" x 13⁄8" x 12 Ga. 10 180.00 $1,926.00 $2,002.30 E
Closure Strip and End Cap Installed AS 349 CS/EC 20 A 1 ⁄8" x 1 ⁄8" x 12 Ga.
5 3
20 180.00 $1,945.70 $2,022.00 E
Continuous Concrete Insert with AS 349 F/EC 10 A 15⁄8" x 13⁄8" x 12 Ga. 10 188.00 $1,945.70 $2,022.00 E
Foam and End Cap installed AS 349 F/EC 20 A 1 ⁄8" x 1 ⁄8" x 12 Ga.
5 3
20 188.00 $1,964.20 $2,040.50 E
Continuous Concrete Insert AS 349 W/O 10 – 1 ⁄8" x 1 ⁄8" x 12 Ga.
5 3
10 178.00 $1,811.60 $1,869.40 E
without Closure Strip or End Cap AS 349 W/O 20 – 15⁄8" x 13⁄8" x 12 Ga. 20 178.00 $1,831.20 $1,849.70 E
Continuous Concrete Insert with AS 449 CS/EC 10 A 1 ⁄8" x 1" x 12 Ga.
5
10 152.00 $1,849.70 $1,945.70 E
Closure Strip and End Cap Installed AS 449 CS/EC 20 A 15⁄8" x 1" x 12 Ga. 20 152.00 $1,869.40 $1,964.20 E
Continuous Concrete Insert with AS 449 F/EC 10 A 1 ⁄8" x 1" x 12 Ga.
5
10 162.00 $1,945.70 $2,022.00 E
Foam and End Cap installed AS 449 F/EC 20 A 15⁄8" x 1" x 12 Ga. 20 162.00 $1,964.20 $2,040.50 E
Continuous Concrete Insert AS 449 W/O 10 – 1 ⁄8" x 1" x 12 Ga.
5
10 151.00 $1,716.80 $1,773.40 E
without Closure Strip or End Cap AS 449 W/O 20 – 1 ⁄8" x 1" x 12 Ga.
5
20 151.00 $1,735.30 $1,754.90 E
Load rating 2,000 lbs. per 12" section, based upon concrete compressive strength of 2500–3000 PSI. Custom lengths available upon request.
www.anvilintl.ca 55
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
concrete inserts
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
AS 653 AS 654
Fig. 284
AS 6151
www.anvilintl.ca 56
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
AS 200 Channel
www.anvilintl.ca 57
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Clamping Nuts
AS NS AS RS AS SS
AS 601 AS 602 AS 603 AS 604 AS 605 AS 606 AS 607 AS 611 AS 613 AS 616
www.anvilintl.ca 58
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Square Washer
15/8" 15/8"
Bolt
Bolt
SizeSize
“A” “A”
AS 619
Angle Connectors
AS 624 AS 633 AS 646
A
A
reversible strut
9
/16" dia. holes
4 /8
5 " AA
AS 200
AS 651
www.anvilintl.ca 59
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
Connectors
AS 665 AS 666 AS 667 AS 668 AS 669 AS 679 AS 686 AS 712 AS 714 AS 718
AS 720 AS 745 AS 809 AS 821 AS 888 AS 913 AS 922 AS 923 AS 928 AS 929
www.anvilintl.ca 60
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
www.anvilintl.ca 61
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Channel Nuts & Hardware Fittings Pipe/Conduit Supports Klo-Shure Concrete Inserts Specialty Strut Technical Data
www.anvilintl.ca 62
Legend: PG: Pre-Galvanized PL: Plain
GR: Powder Coated Supr-Green AL: Aluminum SS: Stainless Steel
EG: Electro-Galvanized HG: Hot Dipped Galvanized ZTC: Zinc Trivalent Chromium
Price List. ...........Sheet # AS.06.10C
specialty strut
Technical Data Specialty Strut Concrete Inserts Klo-Shure Pipe/Conduit Supports Fittings Nuts & Hardware Channel
Effective Date: June 28, 2010
Beam Clamp
AS 2651
AS 3500
www.anvilintl.ca 63
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
INDEX
PRODUCT DESCRIPTION PAGE
CHANNEL
AS 100 3¹⁄₄" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AS 100BTB 6¹⁄₂" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 14
AS 150 2⁷⁄₁₆" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AS 150BTB 4⁷⁄₈" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 14
AS 200 1⁵⁄₈" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
AS 200BTB 3¹⁄₄" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 15
AS 210 1⁵⁄₈" x 1⁵⁄₈" 14 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AS 210BTB 3¹⁄₄" x 1⁵⁄₈" 14 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 16
AS 300 1³⁄₈" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AS 300BTB 2³⁄₄" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 16
AS 400 1" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AS 400BTB 2" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . . . 17
AS 500 ¹³⁄₁₆" x 1⁵⁄₈" 14 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
AS 500BTB 1⁵⁄₈" x 1⁵⁄₈" 14 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 17
AS 520 ¹³⁄₁₆" x 1⁵⁄₈" 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AS 520BTB 1⁵⁄₈" x 1⁵⁄₈" 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . . 18
AS 560 ¹³⁄₁₆" x 1⁵⁄₈" 16 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AS 707 Raceway Closure Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AS 707P Painted Closure Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Revised: www.anvilintl.ca 64
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
INDEX
PRODUCT DESCRIPTION PAGE PRODUCT DESCRIPTION PAGE
AS 687 Slotted “U” Support . . . . . . . . . . . . . . . 27
FITTINGS AND ACCESSORIES AS 689 Adj. Double Slotted Corner Connector 27
AS 85 Rod or Insulator Support . . . . . . . . . . . 23 AS 708 Single Channel Bracket Support . . . . . 28
Fig. 86 Clamp with Lock Nut . . . . . . . . . . . . . . 23 AS 710 “U” Support . . . . . . . . . . . . . . . . . . . . . 28
Fig. 93 Top Beam “C” Clamp (C\," x Z\x") . . . . . . 23 AS 711 “Z” Support . . . . . . . . . . . . . . . . . . . . . 28
Fig. 94 Top Beam “C” Clamp (B\," x C\v") . . . . . . 23 AS 712 Cross Plate . . . . . . . . . . . . . . . . . . . . . 28
Fig. 95 Clamp with Lock Nut . . . . . . . . . . . . . . 23 AS 714 “T” Plate . . . . . . . . . . . . . . . . . . . . . . . . 28
AS 135X Beam Clamp Light Duty . . . . . . . . . . . 23 AS 715 “T” Plate 90° Angle . . . . . . . . . . . . . . . 28
AS 601 Two Hole Splice Plate . . . . . . . . . . . . . 23 AS 718 Flat Angle Plate . . . . . . . . . . . . . . . . . . 28
AS 602 Three Hole Splice Plate . . . . . . . . . . . . 23 AS 719 Four Hole Corner Plate . . . . . . . . . . . . 28
AS 603 Two Hole End Angle . . . . . . . . . . . . . . 23 AS 720 RH/LH Angle Plate Connector . . . . . . . . 28
AS 604 Two Hole Corner Angle . . . . . . . . . . . . 23 AS 721 “U” Support . . . . . . . . . . . . . . . . . . . . . 28
AS 605 Three Hole Corner Angle . . . . . . . . . . 23 AS 732 Shelf Bracket . . . . . . . . . . . . . . . . . . . . 28
AS 606 Three Hole Corner Angle . . . . . . . . . . 23 AS 733 Six Hole “U” Support . . . . . . . . . . . . . . 29
AS 607 Four Hole Corner Angle . . . . . . . . . . . 23 AS 735 Eight Hole “U” Support . . . . . . . . . . . . 29
AS 609 Two Hole Offset “Z” Support . . . . . . . . 24 AS 744 Flat Corner Connector . . . . . . . . . . . . . 29
AS 611 “Z” Support . . . . . . . . . . . . . . . . . . . . . 24 AS 745 Three Hole Corner Angle . . . . . . . . . . 29
AS 612 “Z” Support . . . . . . . . . . . . . . . . . . . . . 24 AS 747 Symmetrical Four Hole Connector . . . 29
AS 613 “U” Support . . . . . . . . . . . . . . . . . . . . . 24 AS 748 Four Hole Corner Joint Connector . . . 29
AS 614 Four Hole Joint Angle Connector . . . . 24 AS 750 Four Hole Corner Connector . . . . . . . . 29
AS 615 Five Hole Shelf Joint Angle Connector . 24 AS 763 & AS 764 Slotted Adj. Corner Angle . . . . 29
AS 616 Four Hole Splice Clevis . . . . . . . . . . . . 24 AS 781 Four Hole Open Angle Connector . . . . 30
AS 617 Three Hole Swivel Plate . . . . . . . . . . . 24 AS 793 Four Hole Closed Angle Connector . . . 30
AS 618 Two Hole Swivel Plate . . . . . . . . . . . . . 24 AS 806 Two Hole Angle with Impressions on
AS 619 Square Washer . . . . . . . . . . . . . . . . . . 24 Both Legs . . . . . . . . . . . . . . . . . . . . . . 30
AS 620 Two Hole Connecting Plate . . . . . . . . . 25 AS 809 Double Channel Bracket . . . . . . . . . . . 31
AS 624 Two Hole Closed Angle Connector . . . 25 AS 821 Eight Hole Double Angle Connector . . 31
AS 629 Three Hole Splice Clevis . . . . . . . . . . . 25 AS 825 RH/LH Pipe Axle Support . . . . . . . . . . . . 31
AS 631 Two Hole Splice Clevis . . . . . . . . . . . . 25 AS 838 RH/LH 6" thru 30" Shelf Bracket . . . . . . . 31
AS 633 Two Hole Open Angle Connector . . . . 25 AS 854 Flat Connector . . . . . . . . . . . . . . . . . . . 32
AS 644 Two Hole Splice Clevis . . . . . . . . . . . . 25 AS 855 Angular “I” Beam Clamp . . . . . . . . . . . 32
AS 645 Three Hole Splice Clevis . . . . . . . . . . . 25 AS 858 Heavy Duty Suspension Rod Beam
AS 646 Four Hole Splice Clevis . . . . . . . . . . . . 25 Clamps . . . . . . . . . . . . . . . . . . . . . . . . 32
AS 651 Reversible Strut Bracket . . . . . . . . . . . 25 AS 865 Wide Throat Heavy Duty Beam Clamp . 32
AS 655 & AS 656 Type “A” End Cap . . . . . . . . . . 26 AS 871 Safety Anchor Strap . . . . . . . . . . . . . . 32
AS 661 T1 Strut Bracket (Slot Up) . . . . . . . . . . . . 26 AS 888 Four Hole Splice Plate . . . . . . . . . . . . . 32
AS 661 T2 Strut Bracket (Slot Down) . . . . . . . . . . 26 AS 889 Five Hole Splice Plate . . . . . . . . . . . . . 32
AS 665 Four Hole Double Corner Connector . . 26 AS 901 & AS 902 Type “A” End Cap . . . . . . . . . . 33
AS 666 Six Hole Double Corner Connector . . . 26 AS 907 “I” Beam Clamp . . . . . . . . . . . . . . . . . . 33
AS 667 Eight Hole Double Corner Connector . 26 AS 913 Ten Hole Two Angle Clevis Connector . 33
AS 668 Six Hole Three Angle Connector . . . . . 26 AS 921 One Hole Angle . . . . . . . . . . . . . . . . . . 33
AS 669 Twelve Hole Three Angle Clevis Connector . 26 AS 922 RH/LH Two Hole Single Corner Angle
AS 677 Cup Support for Standard Single Strut 27 Connector . . . . . . . . . . . . . . . . . . . . . . 33
AS 678 Three Hole “U” Support . . . . . . . . . . . . 27 AS 923 Five Hole Two Angle Connector . . . . . 33
AS 679 “U” Support . . . . . . . . . . . . . . . . . . . . . 27 AS 925 Symmetrical Three Hole Joint Connector 33
AS 684 Beam Clamp . . . . . . . . . . . . . . . . . . . . 27 AS 926 Strut Brace . . . . . . . . . . . . . . . . . . . . . . 33
AS 685 Beam Clamp . . . . . . . . . . . . . . . . . . . . 27 AS 927 Five Hole Corner Connector . . . . . . . . 33
AS 686 Beam clamp . . . . . . . . . . . . . . . . . . . . . 27 AS 928 “Z” Support . . . . . . . . . . . . . . . . . . . . . 34
Revised: www.anvilintl.ca 65
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
INDEX
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . PAGE PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . PAGE
AS 3064 Double Column Post Base . . . . . . . . . . 41
FITTINGS AND ACCESSORIES (Continued)
AS 3164 Double Channel Bracket Support . . . . . 41
AS 929 “U” Support . . . . . . . . . . . . . . . . . . . . . . 34 AS 3373 Universal Angle Bracket . . . . . . . . . . . . 41
AS 930 Type “A” End Cap . . . . . . . . . . . . . . . . . 34 AS 6153 Safety End Cap . . . . . . . . . . . . . . . . . . . 42
AS 978 “U” Support . . . . . . . . . . . . . . . . . . . . . . 34 AS 9400 Adjustable Base . . . . . . . . . . . . . . . . . . . 42
AS 993 Inside Clevis . . . . . . . . . . . . . . . . . . . . . 34 AS 9401 Double Adjustable Base . . . . . . . . . . . . 42
AS 998 “I” Beam Clamp . . . . . . . . . . . . . . . . . . . 35 AS 9402 Two Hole Hinge Connector . . . . . . . . . . 42
AS 2064 Double Column Post Base . . . . . . . . . . 35 AS 9403 Three Hole Hinge Connector . . . . . . . . . 42
AS 2112 Cross Connector . . . . . . . . . . . . . . . . . . 35 AS 9404 Four Hole Hinge Connector . . . . . . . . . . 42
AS 2119 “U” Connector . . . . . . . . . . . . . . . . . . . . 35
AS 2128 RH/LH Six Hole Corner Connector . . . . . 35 PIPE AND CONDUIT SUPPORTS
AS 2144 Corner Angle . . . . . . . . . . . . . . . . . . . . . 35 AS 51 Right Angle Pipe or Conduit Clamp . . . 43
AS 2190 Flat Corner Connector . . . . . . . . . . . . . . 35 Fig. 67 Pipe or Conduit Hanger . . . . . . . . . . . . 43
AS 2401 - 2403 Ladder Rung . . . . . . . . . . . . . . . . 36 Fig. 69 Swivel Ring Hanger . . . . . . . . . . . . . . . . 43
AS 2404 - 2408 Wall Ladder Bracket . . . . . . . . . . 36 Fig. 137 “U” Bolt with Nuts Long Tangent . . . . . . 43
AS 2421 45° Stair Tread Support . . . . . . . . . . . . . 36 AS 270 Conduit Clamp . . . . . . . . . . . . . . . . . . . . 43
AS 2422 37Z\x° Stair Tread Support . . . . . . . . . . . 36 AS 815 Double Roller Pipe Support . . . . . . . . . . 44
AS 2504 Square Washer with Channel Guide . . . 36 AS 1000 Pre-Assembled EMT Conduit Clamps . . 44
AS 2511 End Cap with Knock Out . . . . . . . . . . . . 36 AS 1100 Pre-Assembled Rigid Steel Conduit and
AS 2520 Two Hole Adjustment Angle . . . . . . . . . 37 Pipe Clamps . . . . . . . . . . . . . . . . . . . . . 45
AS 2521 Two Wheel Trolley . . . . . . . . . . . . . . . . . 37 AS 1200 Pre-Assembled O.D. Tubing Clamp . . . 45 & 46
AS 2522 Four Wheel Trolley . . . . . . . . . . . . . . . . 37 AS 1300 Pre-Assembled Universal Clamp . . . . . .47
AS 2528 Trolley Beam Standard Support . . . . . . 37 AS 1450 One-Hole Clamp for O.D. Tubing . . . . . 47
AS 2528-1 Trolley Beam Joint Support . . . . . . . . . . 37 AS 1901 Pipe Roller Support . . . . . . . . . . . . . . . . 48
AS 2545 Slotted 90º Angle . . . . . . . . . . . . . . . . . . 37 AS 1902 Pipe Roller Support . . . . . . . . . . . . . . . . 48
AS 2560 & 2561 Conduit Connector Fitting Assembly . 37 AS 1911 Pipe Roller . . . . . . . . . . . . . . . . . . . . . . . 48
AS 2580 Type “A” End Cap . . . . . . . . . . . . . . . . . 38 AS 3101 - 3115 One Piece Cable and Conduit Clamp . 48
AS 2601 “Z” Support . . . . . . . . . . . . . . . . . . . . . . 38 AS 3126 Hold Down Clamp . . . . . . . . . . . . . . . . . 49
AS 2623 Swivel Adapter . . . . . . . . . . . . . . . . . . . . 38 AS 3138 Parallel Pipe Clamp . . . . . . . . . . . . . . . . 49
AS 2627 Spacer Clevis . . . . . . . . . . . . . . . . . . . . 38 AS 3792 Cushion Strip . . . . . . . . . . . . . . . . . . . . . 50
AS 2631 Swing Gate Fixture Hanger . . . . . . . . . . 39 AS 004OD - 106P Cushion Clamp Assembly . . . 50 & 51
AS 2631D Swing Gate Fixture Hanger . . . . . . . . . . 39
AS 2648 “U” Support . . . . . . . . . . . . . . . . . . . . . . 39 KLO-SHURE®
AS 2651 Beam Clamp . . . . . . . . . . . . . . . . . . . . . 39 Strut Mounted Insulation Couplings
AS 2654 & 2654A Column Attachment . . . . . . . . . 39 with Strut Clamp . . . . . . . . . . . . . . . . . 52 – 54
AS 2656 “U” Bolt Beam Clamp with Hook . . . . . . 40
AS 2657 Double “U” Bolt Beam Clamp . . . . . . . . 40 CONCRETE INSERTS
AS 3013 Single Column Post Base . . . . . . . . . . . 40
Fig. 152 Screw Concrete Insert . . . . . . . . . . . . . . 55
AS 3025 Post Base . . . . . . . . . . . . . . . . . . . . . . . 40
Fig. 285 Light Weight Concrete Insert . . . . . . . . . 55
AS 3029 Double Column Post Base . . . . . . . . . . 40
AS 349 Continous Concrete Insert . . . . . . . . . . . 55
AS 3033 Post Base . . . . . . . . . . . . . . . . . . . . . . . 40
AS 3040 Post Base . . . . . . . . . . . . . . . . . . . . . . . 40 AS 449 Continous Concrete Insert . . . . . . . . . . . 55
AS 3049 Two Hole Slotted 90° Corner Connector 41 AS 653 Type “B” End Cap . . . . . . . . . . . . . . . . . 56
AS 3060 Offset Connector . . . . . . . . . . . . . . . . . . 41 AS 654 Type “B” End Cap . . . . . . . . . . . . . . . . . 56
Fig. 284 Concrete Deck Insert . . . . . . . . . . . . . . . 56
AS 6151 Plastic Closure Strip . . . . . . . . . . . . . . . 56
Revised: www.anvilintl.ca 66
Anvil-Strut PriceList
Effective Date: June 28, 2010 | Sheet # AS.06.10C
INDEX
SPECIALTY STRUT (Stainless Steel • Zinc Dichromate • Hot Dipped Galvanized)
PRODUCT DESCRIPTION PAGE
AS 200 SS 1B\," x 1B\," 12 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
AS 200BTB SS 3Z\v" x 1B\," 12 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . 57
AS 210 SS 1B\," x 1B\," 14 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
AS 210BTB SS 3Z\v" x 1B\," 14 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . 57
AS 500 ZC\zn" x 1B\," 14 Gauge Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
AS 500BTB 1B\," x 1B\," 14 Gauge Back-to-Back Channel . . . . . . . . . . . . . . . . . 57
Revised: www.anvilintl.ca 67
Corporate Offices
110 Corporate Drive, Suite 10
P.O. Box 3180
Portsmouth, NH 03801-3180
Tel: 603-422-8000
Fax: 603-422-8033
E-mail: webmaster@anvilintl.com
U . S . RE G IO N AL SE RV IC E CE N TE RS
Northern Region Southern Region
Regional Distribution & Customer Service Center Regional Distribution & Customer Service Center
SERVICING: Illinois, Indiana, Iowa, Kentucky, Michigan, SERVICING: Alabama, Arkansas, Kansas, Louisiana,
Minnesota, Nebraska, North and South Dakota, Ohio, Mississippi, Missouri, Oklahoma, Tennessee, Texas
West Pennsylvania, West Virginia, Wisconsin 1401 Valley View Lane, Suite 150
750 Central Avenue Irving, TX 75061
University Park, IL 60484 Tel: 972-871-1206
Tel: 708-885-3000 Fax: 972-641-8946
Fax: 708-534-5441 Toll Free: 1-800-451-4414
Toll Free: 1-800-301-2701
B U I L D I N G C O N N E C T I O N S T H A T L A S T
www.anvilintl.com