Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Career Objective:
To have a growth oriented and challenging career, where I can contribute my
knowledge and skills to the organization and enhance my experience through
continuous learning and teamwork.
Career Summary:
Graduated B.E (MECHANICAL ENGINEERING) and worked as Quality
Control Inspector at Gamma Weld Inspection Services.
Educational Qualifications:
Year of
Work Experience:
Worked as Quality Control Inspector in Gamma Weld Inspection Services, Hyderabad
from 10thJanuary 2016 to 20thApril 2018.
Job Responsibilities:
➢ Check drawing specifications.
➢ Fit up inspections for root gap, root face, miss alignment and other surface
discontinuities.
➢ Final Visual inspection after completion of weld and marking welder number and
weld identification number as per built drawing.
➢ Marking repair areas on weld and carry out weld repair as per approved
procedures.
Academic Project:
EVALUATION OF MECHANICAL PROPERTIES OF HYBRID SURFACE
COMPOSITES FABRICATED THROUGH FRICTION STIR PROCESSING.
➢ In this project an attempt is made to fabricate the Aluminum based surface Metal
Matrix Composites.
➢ AA7075 is taken as the matrix material and the MWCNT and SiC were taken as
reinforcements to fabricate the Al based Hybrid Metal Matrix Surface Composites.
➢ Friction Stir Processing has been adopted to fabricate the Surface MMCs.
➢ Subsequently, the tensile tests were carried out so as to evaluate elastic (stress-
strain) behaviour.
➢ Finally the hardness tests and SEM images was carried out on fractured and
sub-fractured surfaces of tensile tested specimen to analyze them.
Technical Skills:
Achievements:
➢ Presentation on “Friction Stir Processing” in the technical meet held at college
in 2014.
Extra-Curricular activities:
Gender : Male.
AMBERPET, HYDERABAD-500013,
TELANGANA, INDIA.
Declaration:
I under signed, certify that to the best of my knowledge and belief,
these data correctly describes my qualification and me.
Place: Hyderabad