Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
21 al 22 de Julio de 2009
HORMIGONES MASIVOS
Temas Relevantes para el Constructor
Carlos E. Fernández N.
Jefe de Área Especialización
Salfacorp
Temas a Mostrar
! I. Objetivos Generales
! II. Definición de Hormigón Masivo
! III. Temas Relevantes para el Constructor
! Control de la Temperatura – Descimbre
! Juntas o cortes en los hormigones
! Curado
! IV. Conclusiones
! V. Consultas
I. Objetivos Generales
13373 m3
19914 m3 40%
60%
30% a 40% son
Hormigones masivos
Hormigones
Controlados
Hormigones Controlados
5000 m3
2675 m3
14% 15%
Hormigones No
Controlados
28287
Hormigones no
controlados 85%
15816 m3
86%
10 a 15 % Hormigones
Controlados como Masivos
Caso particular analizado para 2 Obras
II. Hormigón Masivo
3. P e r í o d o a c o n t r o l a r l a
Temperatura y mantener
protegido el Hormigón -
Descimbre
III. Temas Relevantes
para el Constructor
1. Temperatura Máxima en el hormigón no debe superar los 70° C
“Curing concrete above certain critical temperatures may lead to the expansion and
cracking associated with DEF” (delayed ettringite formation).
“DEF results from a chemical reaction, or sets of reaction, that are still not well
understood at the present time, but the diagnosis is relatively simple; deterioration
results from paste expansion in the affected concrete”.
“Regarding DEF, however, a high concrete temperature at an early age is a very
important parameter. At certain temperatures, generally above 70 °C, and more
frequently above 80°C, ettringite becomes unstable because its solubility increases.”
“ El curado del hormigón por encima de ciertas temperaturas críticas puede conducir
a la expansión y fisuración asociadas con la DEF” (formación de etringita diferida).
“Los resultados DEF de una reacción química o conjuntos de reacciones, no están
aún bien comprendidas en este momento, pero el diagnóstico es relativamente
simple; de la expansión de la pasta en el hormigón afectado, resulta el deterioro.”
Considerando la DEF, sin embargo, una temperatura alta del hormigón a una edad
temprana es un parámetro muy importante. A ciertas temperaturas, generalmente
por encima de 70 ° C, y mas frecuentemente por encima de 80 ° C, la etringita se
vuelve inestable porque aumenta su solubilidad.
Why Chemistry Matters in concrete by Vagn C. Johansen, Waldemar A Klemm, and Peter C. Taylor
III. Temas Relevantes
para el Constructor
Dificultades en Obra con el vaciado
III. Temas Relevantes
para el Constructor
COMPORTAMIENTO TEMPERATURAS HORMIGON AUTOCOMPACTANTE
NÚCLEO - SUPERIOR
100,0
90,0
80,0
70,0
TEMPERATURAS ºC
60,0
50,0
40,0
30,0
20,0
12-‐E ne 13-‐E ne 14-‐E ne 15-‐E ne 16-‐E ne 17-‐E ne 18-‐E ne 19-‐E ne 20-‐E ne 21-‐E ne
3.3.3 Form removal and curing formed surfaces - …When forms are removed and
protection is discontinued, the concrete should be cooled gradually to ambient
temperature at rates not exceeding 14 °C (25 °F) in 24 hrs. The concrete can be
cooled gradually by replacing the forms with coverings that retain less heat when the
forms are removed. When the temperature differential between the concrete surface
and the ambient air is less than 14 C° (25 F°), forms can be removed and protection
discontinued without the need for gradual cooling.
Nch 170.Of 85
55 °C
45 °C
TEMPERATURAS ºC
35 °C
25 °C
15 °C
05 °C
01-May
02-May
03-May
04-May
05-May
06-May
07-May
08-May
09-May
20-Abr
21-Abr
22-Abr
23-Abr
24-Abr
25-Abr
26-Abr
27-Abr
28-Abr
29-Abr
30-Abr
DIFERENCIAL DE TEMPERATURAS
SUP - AMBIENTE
60 °C
50 °C
40 °C
TEMPERATURAS
30 °C
20 °C
10 °C
00 °C
FECHA DE MEDICIÓN
II. Hormigón Masivo
10.1…” joints should be provided at proper intervals and locations in mass concrete
to control random cracking, to accommodate volumetric changes, and to facilitate
construction. The two principal types of joints used in mass concrete are
contraction and construction joints.”
3.2.2.1…”The main concern in joint placement is to provide adequate shear transfer and
flexural continuity through the joint. Flexural continuity is achieved by continuing the
reinforcement through the joint with sufficient length past the joint to ensure an adequate
splice length for the reinforcement. Shear transfer is provided by shear friction between
the old and new concrete, or dowel action in the reinforcement through the joint. Shear
keys are usually undesirable (Fintel 1974)”
Fin