Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ESPAÑOL
RECEPTOR DVD CON MONITOR KD-AV7100
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
LVT1822-003C
[JW]
ENGLISH
INTRODUCTION
Basic operations—Main unit ........... 4
2
Basic operations—
Remote controller (RM-RK253) ...... 6
Playable disc type ............................ 8
OPERATIONS
Clock setting ................................... 9
1 Common operations ........................ 10
• Your preset adjustments will also be erased. Listening to the radio ...................... 12
Disc operations ................................ 15
SD operations .................................. 31
USB operations ................................ 33
EXTERNAL DEVICES
Listening to the iPod........................ 35
Using other external components ..... 38
SETTINGS
Sound adjustments .......................... 39
Menu operations ............................. 41
REFERENCES
For safety...
• Do not raise the volume level too much, as this will
Maintenance ................................... 46
block outside sounds, making driving dangerous. More about this unit ........................ 47
• Stop the car before performing any complicated Troubleshooting .............................. 51
operations.
Specifications .................................. 54
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
3 INTRODUCTION
Operations are explained mainly using the touch panel; however, you can use the buttons on the unit and remote
controller if they have the same or similar names or marks.
5 6 7 8 9 p q w e r t
1 “TUNER” :
• Performs Auto Storing (AS).
• Performs Preset Scanning (PS) if pressed and
held. y i
2 Selects the bands.
u
3 Changes the information on the display window
or monitor.
4 Opens/closes the monitor panel.
5 Disc loading slot
6 • Turns on the power. r Detaches the control panel.
• Adjusts the volume if turned (while the power t Ejects the disc.
is on). y AUX input jack
• Mutes the sound if the power is on.*1 u SD card slot
• Turns off the power if pressed and held. i USB terminal
7 Selects the source.
8 • “TUNER” : Performs Auto Search. *1 Muting is automatically canceled as you change the
• “DISC/USB/SD/iPod”: Reverse skip/forward skip source.
9 Remote sensor *2 Use these buttons when the monitor panel is opened.
p “DISC/USB/SD/iPod”: Plays/pauses.
q Changes the source to “DISC” (and starts This unit contains a magnet. Do not bring the
playback). following objects close to the unit:
w*2 Displays or exits “Main Menu” of the unit. • Watches
e*2 • Displays the audio setting screen. • Magnetic stripe cards such as credit cards
• Displays the speaker adjustment screen while • Magnetic tapes such as casette tapes and video
enjoying multi-channel surround playback. tapes
ENGLISH
o ; a s
Display window 1 23 4
Source
Available display information varies according to the
playback source.
• Each time you press the button, the information Clock
on the main display changes to show the various
information.
(back to the beginning)
5 INTRODUCTION
When you use the remote controller for the first time, Before using the remote controller:
pull out the insulation sheet. • Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or its
equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time.
• Store the battery in a place where children cannot
reach.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Caution:
Battery shall not be exposed to excessive heat such
as sunshine, fire or the like.
ENGLISH
skip.
1 8 7 “DISC/USB/SD“: Enlarges the playback picture.
9 8 • Turns on the power.
• Mutes the sound if the power is on.*1
2 p
• Turns off the power if press and held.
9 Opens/closes the monitor panel.
q p Adjusts the volume level.
w q • Changes the information on the display when
e the monitor panel is closed.
3 r • “TUNER/DISC/USB/SD/iPod”: Displays the
t current station/track information on the
4 y
monitor when the monitor is opened.
5 u w*2 • Displays the audio setting screen.
i
6 o • Displays the speaker adjustment screen while
enjoying multi-channel surround playback.
7 ; e • “TUNER”: Selects the bands.
• “DISC/USB/SD/iPod“: Stops playback.
r*2 Displays the brightness adjustment bar or
“Picture Menu.”
t*2 Displays or exits “Main Menu” of the unit.
y “DISC/USB/SD“: Performs A-B Repeat.
u “DISC/USB/SD/iPod”: Selects Repeat Mode.
Operations are explained mainly using the touch i • DVD: Displays the disc menu.
panel; however, you can use the buttons on the • VCD: Turns on/off the PBC function.
unit and remote controller if they have the same or o • “TUNER”: Performs Manual Search
similar names or marks. • “DISC/USB/SD/iPod”: Reverse search/forward
search
1 Selects the source. ; • DVD Video: Selects audio language ( ),
2 • Enters numbers. subtitles ( ), and angle ( ).
• “TUNER”: Selects the preset stations. • VCD: Selects audio channel ( ).
• DVD/VCD: Performs title/chapter (track)/time
search.
• DivX/MPEG/JPEG/CD/MP3/WMA, “USB/SD/ *1 Muting is automatically canceled as you change the
iPod”: Selects track. source.
3 Returns to the previous screen. *2 Use these buttons when the monitor panel is opened.
4 • : Selects items/options.
• ENT: Confirms the selection/setting.
• “DISC/USB/SD/iPod“: 6: Plays/pauses.
7 INTRODUCTION
DVD Audio
DVD-ROM
DVD Recordable/Rewritable DVD Video
(DVD-R/-RW*2, +R/+RW*3) DivX*4/MPEG1/MPEG2
• DVD Video: UDF bridge JPEG
• DivX/MPEG1/MPEG2/JPEG/MP3/ MP3/WMA
WMA: ISO 9660 level 1, level 2, WAV/AAC
Romeo, Joliet
MPEG4
DVD-VR/DVD+VR
DVD-RAM
DualDisc DVD side
Non-DVD side
CD/VCD Audio CD/CD Text (CD-DA)
VCD (Video CD)
DTS-CD
SVCD (Super Video CD)
CD-ROM
CD-I (CD-I Ready)
CD-G
CD Recordable/Rewritable CD-DA
(CD-R/-RW) MP3/WMA
• ISO 9660 level 1, level 2, Romeo, JPEG
Joliet DivX/MPEG1/MPEG2
WAV/AAC
MPEG4
*1 If you insert a DVD Video disc of an incorrect Region Code, “Disc region incorrect” appears on the monitor.
*2 DVD-R recorded in multi-border format is also playable (except for dual layer discs).
DVD-RW dual layer discs are not playable.
*3 It is possible to play back finalized +R/+RW (Video format only) discs.
+RW double layer discs are not playable.
*4 DivX Ultra is not playable.
ENGLISH
Before operating the unit, set the clock. 3 Adjust the clock.
• If no operation is done for about 15 seconds, the Ex.: When setting to “3:45 PM”
menu operation will be canceled.
SETUP MENU BACK
General Language
3 : 45
1 2 3
4 5 6
7 8 9
1 2 1
0 OK
Audio ASP MISC
2
Cancels the last entry.
2 TUNER 12:00 AM
SETUP MENU BACK
ST FM-1 87.5 MHz
General Language
P-01 87.7 MHz
Radio : S-Amer1
P-02 89.9 MHz
Clock : 03:45 AM
P-03 97.9 MHz
Clock Mode : 12Hr
P-04 105.9 MHz
TFT Auto Open : Off
P-05 107.9 MHz
Version B/E:901.04.1.080512
AS PS SCAN DX DISP
Audio ASP MISC
9
OPERATIONS
2 Current source *
Main Menu BACK
10
• Each time you press the button, the source Playback picture
changes as follows:
“DISC” = “AV-IN” = “TUNER” = “USB” =
“iPod” = “SD” = “CAMERA” * = “AUX IN”
15
= (back to the beginning)
10
ENGLISH
1 Display the adjustment bar.
TUNER 3:45 PM
AS PS SCAN DX DISP
LOC DX
The button changes to LOC and only stations with sufficient signal strength will be detected.
• Each time you press the button, the button alternates between DX and LOC.
12
ENGLISH
TUNER 3:45 PM
AS PS SCAN DX DISP
☞ page 12 7 8 9 1
0 OK
2 Select a preset number. AS PS SCAN DX DISP
2
TUNER 3:45 PM
TUNER 3:45 PM
2
ST FM-1 92.5 MHz
or
P-01 87.7 MHz
P-02 89.9 MHz
P-03 97.9 MHz
P-04 92.5 MHz
P-05 107.9 MHz
AS PS SCAN DX DISP
13
OPERATIONS
AS PS SCAN DX DISP
2 TUNER 3:45 PM
P-01 1
87.7 MHz
P-02 89.9 MHz
P-03 97.9 MHz
P-04 105.9 MHz
P-05 107.9 MHz
AS PS SCAN DX DISP
2
The unit tunes in to the preset stations for about 10
seconds per station.
• After tuning in to all preset stations, the unit tunes in
to preset number 1.
To stop scanning, press PS again.
14
ENGLISH
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
• Playback will stop after playing back all chapters/tracks on the disc.
If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do.
• In some cases, without showing the message, operations will not be accepted.
Ÿ
Label side
• If “TFT Auto Open” is set to “On,” the monitor automatically comes out when you turn on the unit. (☞ page 42)
• For the space required for monitor ejection, see page 55.
15 OPERATIONS
While playing back a picture, you can perform some operation just touch the specified area of the screen. (☞
below)
• Operation using the on-screen buttons
For
While playing back a picture, you can use the basic operation buttons displayed on the playback picture. (☞
page 17)
• Operation on the list screen
For
You can use the buttons on the list screen. (☞ pages 18 and 19)
• For DivX/MPEG/JPEG, the list screen appears while playback is stopped.
Playback picture
16
ENGLISH
Playback picture Displays the main menu of DVD Video*2
*4
Playback picture
*4
*4 Playback picture
17 OPERATIONS
While stopped...
Track No./Total track No. in the current folder Where playback has been stopped
While stopped...
3 : Starts playback (Slide show).*1
Displays “Main Menu” of the unit. 1 ¡ 4 ¢ : *2
7 Stop
DISC JPEG 3:45 PM
18
ENGLISH
Track No./Total track No. Playing time
Activates/deactivates Scan Mode. (☞ page 23) Displays the disc text. (☞ page 24)
Displays the on-screen number buttons.
Selects Repeat Mode. (☞ page 23) Activates/deactivates Shuffle Mode.
(☞ page 23)
*1 When you start playback next time, playback will start from the first track of the current folder.
*2 These buttons do not work.
*3 While playback is paused or stopped, or during reverse/forward search, this button changes to 3 (play).
*4 Search speed: x2 ] x4 ] x8 ] x16 ] (normal playback)
To resume normal playback during search, press 3.
*5 Track number appears for conventional CDs (ex.: “Track08.CDA”).
19 OPERATIONS
01/14 01:35
20
ENGLISH
1 Touch this area. (☞ page 16)
Search
Search 1 Track ---
1 Title --- 2 Time - -:- -:- -
2 Chapter ---
3 Time - -:- -:- -
Search
Track ---
Search 1 2 3
Time - -:- -:- -
Title --- 1 4 5 6
1 2 3
Chapter ---
Time - -:- -:- - 1 4 5 6 7 8 9 2
7 8 9 2 0 OK
0 OK
3
3
Cancels the last entry.
Cancels the last entry.
On the remote:
1 Display the search screen. 3
2 Select an item. 4 Finish the procedure.
22
ENGLISH
modes—Scan/Repeat/Shuffle. DISC MP3 Repeat single3:45 PM
• For DVD/VCD, display the on-screen buttons first. (☞
02/14 01:35
page 16)
. .Current Folder Name
File Name
DISC MP3 3:45 PM
File Name
02/14 01:35 File Name
File Name
. .Current Folder Name
7 SCAN DISP
File Name
File Name
File Name
File Name
7 SCAN DISP single Folder all off
23 OPERATIONS
PBC On
0
1 Disc type/File type
2 Current title (folder) No./total title (folder) No.
You can display the playback information. 3 Playing time/remaining time
4 Subtitle selection
On the unit: 5 Angle selection
6 Current chapter (track) No./total chapter (track)
or No.
7 Current bit rate
8 Audio selection (audio signal and language)
On the remote: 9 Playing time/remaining time of the track
0 PBC On (Current track No./total track No. when PBC
is off.)
• Touch operation is also available. (☞ page 16) Changing the information on the
monitor
While playing back...
For DVD
1 2 3 4
DVD Video Time 00:13:24/01:25:15 DISC MP3 3:45 PM
Title 1/3 Subtitle 2/3 French
Chapter 4/12 Audio 1/3 D 5.1Ch Eng 02/14 01:35
Angle 1/3 Bitrate 7.3Mbps
. .Current Folder Name
5 6 7 8 File Name
File Name
For DivX File Name
File Name
1 3
7 SCAN DISP
DivX 5.x Time 00:13:24/01:25:15
Track 10/12 Audio 1/3 MP3 2 Ch
Subtitle Off
6 4 8
DISC MP3 3:45 PM
For MPEG
02/14 01:35
1 3
MPEG Time 00:13:24/01:25:15
Name: Track Title
Track 10/12
Artist: Artist Name
Album: Album Name
6
7 SCAN DISP
For JPEG
1 6
JPEG Track 10/12 • “Unknown” appears for conventional CDs or when
the file does not have Tag information.
24
ENGLISH
violent scenes and those unsuitable for your family
General Language
members.
TS Calibrate : No
• Playback of discs containing higher level than Set Password :----
Parental control : PG-13
the selected level will be restricted. Some discs Aspect Ratio : 16:9
may not be played back at all, and others may be Screen saver : On
Audio ASP MISC
played back with higher level scenes skipped.
• This setting takes effect only for a DVD Video
containing restriction level information. SETUP MENU BACK
Enter Password
General Language
TS Calibrate : No
Set Password :---- 4. PG-13
Parental control : 8. Adult 5. PG-R
Aspect Ratio : 16:9 6. R 2
Screen saver 1
: On
Audio ASP MISC
Stops playback.
26
:
Move to the next/previous page of the current
menu.
27 OPERATIONS
*1 Magnification: +1 ] +2 ] +3 ] Off
*2 Search speed: x2 ] x4 ] x8 ] x16 ] (normal playback)
To resume normal playback during search, press 6.
28
ENGLISH
• Without activating center/surround speakers, no
You can enjoy multi-channel surround playback sound comes out of these speakers.
through the front, center, surround speakers for multi- Ex.: Activating the center speaker
channel sources encoded with Dolby Digital*.
SETUP MENU BACK
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are General Language
29 OPERATIONS
General Language
DownMix : DownMix SETUP MENU BACK
Front Speakers : Large
Center Speaker : None General Language
Sur Speakers : None
Test tones : Off
Subwoofer : None
Center delay : No delay Off
Audio ASP MISC Surr delay : No delay On
Night Mode
Pro Logic
: Off
: Off
Auto
2
• PLII Matrix: Selects Pro Logic II Matrix; suitable Test tones : Off
30
ENGLISH
This unit can play the MPEG/JPEG/MP3/WMA files stored in an SD card.
• You can operate the SD card in the same way you operate the files on discs. (☞ pages 17 to 28)
• Playback will stop after playing back all tracks in the SD card.
• If you start playback again after changing the source or turning off the unit, the playback starts from the first track.
• Make sure all important data has been backed up.
31 OPERATIONS
02/14 01:35
32
ENGLISH
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.
This unit can play the JPEG/MPEG1/MPEG2*/MP3/WMA files stored in USB mass storage class device.
• You can operate the USB device in the same way you operate the files on discs. (☞ pages 17 to 28)
• Playback will stop after playing back all tracks in the USB mass storage class device.
• If you start playback again after changing the source or turning off the unit, the playback starts from the first track.
• Make sure all important data has been backed up.
* Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).
Caution:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while “Reading...” is displayed on the monitor screen.
• Do not start the car engine if a USB device is connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• For more details about USB operations, ☞ page 49
33 OPERATIONS
02/14 01:35
USB MP3 3:45 PM
* You can also use the remote controller. The playback mode icon of the selected mode is
displayed.
USB MP3 S 3:45 PM
02/14 01:35
34
ENGLISH
You can connect iPod using the supplied special cable for iPod.
• For connection, see the Installation/Connection Manual (separate volume).
• For details, refer also to the manual supplied for your iPod.
Caution:
Special cable for iPod
(supplied) • Avoid using the iPod if it might hinder your safety
while driving.
• Make sure all important data has been backed up
to avoid losing the data.
~ Connect an iPod.
Playback starts automatically from where it had been paused previously.
• If an iPod has been connected, select “iPod” for the source. (☞ page 10)
Ÿ Adjust the volume.
(☞ page 10)
! Adjust the sound as you want.
(☞ page 39)
Displays the “Main Menu” of the unit. Track No./Total track No.
iPod 3:45 PM
* When playback is paused, or during reverse/forward search, this on-screen button changes to 3 (play).
35 EXTERNAL DEVICES
0/0 00:00
Track Title
SCAN DISP
SCAN DISP
01/57 01:35
ENGLISH
modes—Scan/Repeat/Shuffle.
Track Title iPod 3:45 PM
Track Title
Track Title
Scan Mode Shuffle Mode Track Title
Repeat Mode* Track Title
Track Title
Track Title
Track Title Name: Track Title
Track Title Artist: Artist Name
Track Title
Track Title Album: Album Name
01/57 01:35
37 EXTERNAL DEVICES
Stereo mini-plug
38
ENGLISH
You can select a preset sound mode for 2-channel Adjusting bass/treble
sources. (For multi-channel source, the sound mode is When “User” is selected for “EQ” (☞ left column)...
temporarily canceled.)
1 To adjust bass (–7 to 7):
AUDIO SETTING
Selecting sound mode EQ < User >
1 Display the audio setting screen. BASS
Treble
3
0
–
–
+
+
BAL 0 L R
FADE 0 R F
SW 0 – +
• During multi-channel surround playback, LOUD < Off >
pressing this button displays the speaker
adjustment screen. (☞ page 29) To adjust treble (–7 to 7):
2 AUDIO SETTING AUDIO SETTING
FADE 0 R F FADE 0 R F
SW 0 – + SW 0 – +
LOUD < Off > LOUD < Off >
• For preset bass and treble values: ☞ page 50 2 Finish the procedure.
• When “User” is selected, you can adjust bass and AUDIO SETTING
treble. (☞ right column) EQ < User >
3 Finish the procedure. BASS 3 – +
Treble 5 – +
AUDIO SETTING
EQ < Rock >
BASS – +
Treble – +
BAL 0 L R
On the remote:
FADE
SW
0
0
R
–
F
+
1 Display the audio setting screen.
LOUD < Off >
39 SETTINGS
40
ENGLISH
The following steps are one of the fundamental 4 SETUP MENU BACK
procedures.
• If no operation is done for about 15 seconds, the General Language
SET UP
MONITOR
OFF 5 Finish the procedure.
(twice)
SETUP MENU BACK
41 SETTINGS
Language
Menu items Selectable settings, [reference page]
Language Select the indication language shown on the monitor.
English, French, Spanish, Chinese, Korean, Russian
DVD menu Select the initial disc menu language.
English, French, Spanish, Chinese, Korean, Russian
Subtitle Select the initial subtitle language.
English, French, Spanish, Chinese, Korean, Russian, Auto, Off
Audio Select the initial audio language.
English, French, Spanish, Chinese, Korean, Russian
42
ENGLISH
Menu items Selectable settings, [reference page]
DownMix* 1
Activates or deactivates surround, ☞ [29]
FULL 6CH : Select to reproduce the multi-channel surround sound.
DownMix : Select to downmix the multi-channel signals to 2-channel signals.
Front Speakers*2, You can adjust the speaker size setting.
Center Speaker*2, • Front speakers : Large, Small
Sur Speakers*2, • Center Speaker : Large, Small, None
Subwoofer*2 • Sur Speakers: Large, Small, None
• Subwoofer: None, Present
• Speaker size: “Large” for 13-cm diameter or more; “Small” for 13 cm or less.
• If you select “Large” or “Small” for non-connected speakers, the incoming signals
for the non-connected speakers will not come out of any other speakers.
• For front and surround speakers: You cannot adjust the setting of the left and right
separately.
Test tones Select a speaker to emit test tone.
Off, Left, Right, Center*2, Left surr.*2, Right surr.*2, Subwoofer*2
• To turn off test tone, select “Off.”
Center delay, Surr. You can adjust the speaker output timing of the center speaker and surround
delay speakers. Select the speaker distance from the listening position.
• Center delay : No Delay, 0.3m, 0.6m, 1m, 1.4m, 1.7m
• Surr. delay : No Delay, 1m, 2m, 3m, 4m, 5.1m
Night Mode You can enjoy a powerful sound at a low volume level while playing Dolby Digital
software.
Off: Select to turn off this function.
On: Select to apply the effect to multi-channel encoded software.
Pro Logic Activates or deactivates the selected Pro Logic II mode (Pro Logic, PLII Matrix, PLII
Movie, PLII Music), ☞ [30]
Off, On, Auto
Down sampling Normally select “Off.” If the sound is distorted, select “On.”
Decode Mode*3 Select the Pro Logic II mode you want, ☞ [30]
Off, Pro Logic, PLII Matrix, PLII Movie, PLII Music
*1 This setting takes effect only for Dolby Digital multi-channel encoded discs.
*2 Not available when “DownMix” is set to “DownMix.”
*3 Available only for a 2-channel source on a disc except for DivX/MPEG1/MPEG2 discs.
ASP
Menu items Selectable settings, [reference page]
Bass Freq Select the frequency for the bass sound adjustment.
60Hz, 80Hz, 100Hz, 200Hz
Treble Freq Select the frequency for the Treble sound adjustment.
10kHz, 12.5kHz, 15kHz, 17kHz
Bass Q-Factor Adjust the Q-slope for bass sound.
1.0, 1.25, 1.5, 2.0
iPod Gain, AuxIn Gain, Adjust and store auto-adjustment volume level for each source. The volume level will
DVD Gain*1*2, Tuner automatically increase or decrease when you change the source.
Gain –7 to +7; Initial 0
44
ENGLISH
Menu items Selectable settings, [reference page]
TS Calibrate Correct the accuracy of the touch sensor (see “Calibration” below).
No, Yes
Set Password*3 Enter the password (4-digit), ☞ [25]
Parental control Select the restriction level for DVD Video playback, ☞ [25]
Kid Safe (most restrictive), G, PG, PG-13, PG-R, R, NC-17, Adult (least restrictive)
Aspect Ratio Select the aspect ratio of the picture.
4:3, 16:9
Screen saver Activate/deactivate the screen saver.
Off, On
Load Factory*4 Select “Yes” to reset the unit.
No, Yes
• When you select “Yes,” the confirmation message appears. Select “Yes.” The unit
turns off, then turn on again.
DivX Registration This unit has its own Registration Code. Once you have played back a file with which
the Registration Code recorded, this unit’s Registration Code is overwritten for
copyright protection.
Calibration A D
After selecting “Yes” for “TS Calibrate,” the guidance for calibration appears
on the monitor as described on the right.
Touch “ “ which appears at each corner (A – D) in turn. Please press point A at upper left corner
• Touch “ “ slowly and carefully. Touch “ “ repeatedly until the next
marker appears if it does not appear by touching once.
• When the unit detects that you have touched all “ “ accurately, the
unit exits the calibration screen. B C
*1 You cannot change the “DVD Gain” setting when “DownMix” is set to “FULL 6CH.” (☞ page 43)
*2 The setting for “DVD Gain” is applied also to SD and USB.
*3 Remember your password or make a note of it. You need to enter the password to change the setting or cancel
restriction.
*4 The settings for the clock (“Clock”) and parental control (“Set Password” and “Parental control”) are not
initialized.
45 SETTINGS
46
ENGLISH
Basic operations Playing Recordable/Rewritable discs
Turning off the power • This unit can recognize a total of 1 500 files and 200
folders (a maximum of 1 500 files per folder).
• If you turn off the power while playing a disc, USB
• Use only “finalized” discs.
device, or SD card, playback will automatically start
• This unit can play back multi-session discs; however,
next time you turn on the power.
unclosed sessions will be skipped while playing.
• This unit can recognize a total of 24 characters for
FM/AM file/folder names.
Storing stations in memory • Some discs or files may not be played back due to
• When Auto Search is over, received stations are their characteristics or recording conditions.
preset in “P-01” (lowest frequency) to “P-06”
(highest frequency). Restricting playback
• If you enter a wrong password, “Password Error”
Disc appears. Enter the correct password.
General
Enjoying surround sounds
• In this manual, words “track” and “file” are
interchangeably used. • The surround playback is available only for “DISC.”
• The unit can play back a disc on which several type • You cannot activate surround for MPEG multi-
of files are recorded. The files are played back by the channel DVD Video, DivX 2-channel and MPEG 2-
order of the recording. channel sources. Regardless of the surround setting
• The unit can play back a disc on which CD (CD-DA) (“DownMix” and “Pro Logic”), stereo sounds are
files and audio/video files are recorded. emitted only through the front speakers.
• When a disc is inserted upside down or has no
playable files, “Please Eject” appears on the monitor. File playback
Eject the disc. Playing DivX files
• If the ejected disc is not removed within 10 seconds,
• This unit can play back DivX files with the extension
the disc is automatically inserted again into the
code <.divx>, <.div>, <.avi> (regardless of the
loading slot to protect it from dust.
letter case—upper/lower).
• Audio stream should conform to MP3 or Dolby Digital.
• The file encoded in the interlaced scanning mode
may not be played back correctly.
• The maximum bit rate for video signals (average) is
4 Mbps.
47 REFERENCES
48
ENGLISH
been formatted correctly, an error message appears – iPod (Click Wheel)
on the monitor. In this case, replacing or reformatting – iPod mini
the USB device may solve the problem. (All data in – iPod photo
the USB device are erased when you reformat it. – iPod nano
Make sure to back up the data before reformatting.) – iPod with video
• The unit cannot recognize a USB device whose rating • If the iPod does not play correctly, update your iPod
is other than 5 V and exceeds 500 mA. software to the latest version. For details about
• While playing from a USB device, the playback order updating your iPod, visit <http://www.apple.com>.
may differ from other players. • When you turn on this unit, the iPod is charged
• This unit may be unable to play back some USB through the unit.
devices or some files due to their characteristics or • You can control the iPod from this unit when “JVC” or
recording conditions. “ ” appears on the iPod display after connection.
• USB devices equipped with special functions such as • The song order displayed on the monitor of the unit
data security functions cannot be used with the unit. may differ from that of the iPod.
• Do not use a USB device with 2 or more partitions. • The text information may not be displayed correctly:
• Depending on the shape of the USB devices and – Some characters such as accented letters cannot
connection ports, some USB devices may not be be displayed correctly on the monitor.
attached properly or the connection might be loose. – Communication between the iPod and the unit is
• When connecting a USB device, refer also to its not stable.
instructions. • This unit can recognize a total 20 characters.
• Connect only one USB device to the unit at a time. Do
not use a USB hub. Notice:
• This unit may not recognize a USB device connected When operating an iPod, some operations may not
through a USB card reader. be performed correctly or as intended. In this case,
• This unit may not play back files in a USB device visit the following JVC web site: <http://www.
properly when using a USB extension cord. jvc-victor.co.jp/english/car/>
• This unit cannot assure proper functions or supply
power to all types of the devices.
• This unit can recognize a total of 1 500 files and 200
folders (a maximum of 1 500 files per folder).
• This unit can recognize a total 14 characters for file/
folder names.
• For MPEG1/2 files: The maximum bit rate for video
signals (average) is 2 Mbps.
49 REFERENCES
50
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
Symptoms Remedies/Causes
• No sound comes out of the center speaker. • Center speaker is not activated. (☞ page 43)
• Center speaker is used only for surround playback. No
sound comes out for stereo playback.
• No sound comes out of the rear speakers, and Rear speakers and subwoofer are not activated. (☞ page
subwoofer. 43)
• The monitor is not clear and legible. Sunshine from the windshield may cause this symptom.
General
• Static noise while listening to the radio. Connect the antenna firmly.
• Disc can be neither recognized nor played . Change the disc.
• Recordable/Rewritable discs cannot be • Insert a finalized disc.
played back. • Finalize the discs with the component which you used
• Tracks on the Recordable/Rewritable discs for recording.
Disc in general
cannot be skipped.
• Playback does not start. • Insert the disc correctly again.
• The format of files is not supported by the unit.
• Playback of DVD Video does not start. Playback is restricted. Release the restriction. (☞ page 25)
• The playback picture is not clear and legible. Adjust the monitor brightness. (☞page 11)
• Sound and pictures are sometimes • Stop playback while driving on rough roads.
interrupted or distorted. • Change the disc.
51 REFERENCES
(☞Installation/Connection Manual)
• No picture appears on the external monitor. • Connect the video cord correctly.
Disc in general
52
ENGLISH
• Update the firmware version.
• Charge the battery.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• Playback stops. The headphones are disconnected during playback. Turn off
the unit’s power and turn on it again.
iPod
• No sounds can be heard when connecting an • Disconnect the headphones from the iPod nano.
iPod nano. • Update the firmware version of the iPod nano.
• “No Files” appears on the monitor. No tracks are stored. Import tracks to the iPod.
• The iPod’s controls do not work after Reset the iPod.
disconnecting from this unit.
• “Cannot play” appears on the monitor. Communication error occurs. Disconnect and connect the
cable to the iPod again.
• “NO VIDEO SIGNAL” appears on the monitor. • Turn on the video component if it is not on.
• Connect the video component correctly.
AV-IN
• Playback picture is not clear and legible. Adjust the monitor brightness. (☞page 11)
• No sounds can be heard. Check the connecting cable and its connection.
53 REFERENCES
VCD/CD: 16 Hz to 20 000 Hz
Dynamic Range: 93 dB
Signal-to-Noise Ratio: 95 dB
Wow and Flutter: Less than measurable limit
54
Capacity 2 Gbytes
ENGLISH
Data Transfer Rate Maximum 10 Mbps
USB Standards: USB 1.1
Data Transfer Rate Full Speed: Maximum 12 Mbytes
Low Speed: Maximum 1.5 Mbytes
USB
33
CAUTION: When ejecting the monitor, keep an open space 2.5
for the monitor to come out. If not, the monitor may obstruct
the steering wheel and gearshift lever operations, as this may
result in a traffic accident.
110˚
167
50˚
43
Unit: mm
44
ESPAÑOL
Control remoto (RM-RK253)........... 6
Tipo de disco reproducible ................ 8
OPERACIONES
1 Ajuste del reloj ................................ 9
• También se borrarán los ajustes preestablecidos por Operaciones comunes ...................... 10
usted. Para escuchar la radio ...................... 12
Operaciones de los discos ................. 15
Operaciones de SD ........................... 31
Operaciones de USB ......................... 33
DISPOSITIVOS EXTERNOS
Para escuchar el iPod ....................... 35
Uso de otros componentes externos ... 38
AJUSTES
Ajustes del sonido ............................ 39
Operaciones de los menús ................ 41
REFERENCIAS
Para fines de seguridad...
• No aumente demasiado el nivel de volumen pues es Mantenimiento ............................... 46
muy peligroso conducir si no se escuchan los sonidos Más sobre este receptor ................... 47
exteriores.
• Detenga el automóvil antes de efectuar cualquier
Localización de averías..................... 51
operación complicada. Especificaciones............................... 54
3 INTRODUCCIÓN
5 6 7 8 9 p q w e r t
1 “TUNER”:
• Realiza el almacenamiento automático (AS).
• Realiza el escaneo programado (PS) si lo pulsa
y mantiene pulsado.
2 Selecciona las bandas. y i
3 Cambia la información mostrada en la ventana de u
visualización o el monitor.
4 Abre/cierra el panel del monitor.
5 Ranura de carga del disco
6 • Enciende la unidad.
• Controla el volumen girándolo (mientras el r Desengancha el panel de control.
sistema está encendido). t Expulsa el disco.
• Silencia el sonido si el sistema está y Toma de entrada AUX
encendido.*1 u Ranura para tarjeta SD
• Desconecta la alimentación si lo pulsa y i Terminal USB
mantiene pulsado.
7 Seleccione la fuente. *1 El silenciamiento se cancela automáticamente cuando
8 • “TUNER”: Efectúa la búsqueda automática. usted cambia la fuente.
• “DISC/USB/SD/iPod”: Salto hacia atrás/salto *2 Utilice estos botones cuando el panel del monitor está
hacia adelante abierto.
9 Sensor remoto
p “DISC/USB/SD/iPod”: Reproduce/pone en pausa. Esta unidad contiene un imán. Evite acercar los
q Cambia la fuente a “DISC” (e inicia la siguientes objetos a la unidad:
reproducción). • Relojes
w*2 Se muestra o sale de “Main Menu” en la unidad. • Tarjetas con banda magnética, como tarjetas de
e*2 • Visualiza la pantalla de ajuste de audio. crédito
• Visualiza la pantalla de ajuste de altavoces • Cintas magnéticas, como cintas cassette y cintas
durante la reproducción surround multicanal. de vídeo
ESPAÑOL
o ; a s
o Monitor s • “TUNER/DISC/USB/SD/iPod”: Visualiza la
• Están disponibles las operaciones del panel táctil. información de la emisora/pista actual en el
; Desliza el panel del monitor hacia adelante/hacia monitor.
atrás. • Visualiza la barra de ajuste de brillo o “Picture
a • Cambia el ángulo del panel del monitor. Menu”, si lo pulsa y mantiene pulsado.
• Ajusta el brillo del monitor cuando se visualiza
la barra de ajuste.
• Ajusta la imagen procedente de los
componentes externos cuando se visualiza
“Picture Menu”.
Ventanilla de visualización 1 23 4
Fuente
La información en pantalla disponible varía según la
fuente de reproducción.
• Cada vez que pulsa el botón, la información Reloj
mostrada en la pantalla principal cambia para
mostrarle diversas informaciones.
(vuelta al comienzo)
5 INTRODUCCIÓN
Advertencia:
Para evitar daños y accidentes
• No instale ninguna otra pila distinta de CR2025 o
su equivalente.
• No deje el control remoto en un lugar expuesto
a la luz directa del sol (como los cubretableros)
durante un tiempo prolongado.
• Guarde la pila fuera del alcance de los niños.
• Evite recargar, cortocircuitar, desarmar, o calentar
la pila, o arrojarla al fuego.
• No deje la pila con otros objetos metálicos.
• No toque la pila con pinzas u otras herramientas
similares.
• Enrolle la pila con una cinta y aíslela antes de
desecharla o guardarla.
Precaución:
No deje las pilas expuestas a altas temperaturas,
como, por ejemplo, a la luz del sol, al fuego u otras
condiciones similares.
ESPAÑOL
2 p • Desconecta la alimentación si lo pulsa y
mantiene pulsado.
q 9 Abre/cierra el panel del monitor.
w p Ajusta el nivel de volumen.
e q • Cambia la información mostrada en la pantalla
3 r cuando se cierra el panel del monitor.
t • “TUNER/DISC/USB/SD/iPod”: Visualiza la
4 y información de la emisora/pista actual en el
5 u monitor cuando se abre el monitor.
i w*2 • Visualiza la pantalla de ajuste de audio.
6 o • Visualiza la pantalla de ajuste de altavoces
7 ; durante la reproducción surround multicanal.
e • “TUNER”: Selecciona las bandas.
• “DISC/USB/SD/iPod”: Pare la reproducción.
r*2 Visualiza la barra de ajuste de brillo o “Picture
Menu”.
t*2 Se muestra o sale de “Main Menu” en la unidad.
y “DISC/USB/SD”: Realiza la repetición A-B.
u “DISC/USB/SD/iPod”: Selecciona el modo de
Las operaciones se explican utilizando principalmente
repetición.
el panel táctil, no obstante, podrá utilizar los botones
i • DVD: Visualiza el menú de disco.
de la unidad principal y control remoto si tienen
• VCD: Activa/desactiva la función PBC.
nombres y marcas iguales o similares.
o • “TUNER”: Realiza la búsqueda manual
• “DISC/USB/SD/iPod”: Búsqueda hacia atrás/
1 Seleccione la fuente.
búsqueda hacia adelante
2 • Introduce números.
; • DVD Vídeo: Selecciona el idioma de audio
• “TUNER”: Selecciona las emisoras preajustadas.
( ), subtítulos ( ), y ángulo ( ).
• DVD/VCD: Efectúa la búsqueda del título/
• VCD: Selecciona el canal de audio ( ).
capítulo (pista)/tiempo.
• DivX/MPEG/JPEG/CD/MP3/WMA, “USB/SD/
iPod”: Selecciona la pista.
*1 El silenciamiento se cancela automáticamente cuando
3 Vuelve a la pantalla anterior.
usted cambia la fuente.
4 • : Selecciona los elementos/opciones.
*2 Utilice estos botones cuando el panel del monitor está
• ENT: Confirma la selección/ajuste.
abierto.
• “DISC/USB/SD/iPod”: 6: Reproduce/pone
en pausa.
7 INTRODUCCIÓN
DVD Audio
DVD-ROM
DVD Grabable/reescribible DVD Vídeo
(DVD-R/-RW*2, +R/+RW*3) DivX*4/MPEG1/MPEG2
• DVD Vídeo: Puente UDF JPEG
• DivX/MPEG1/MPEG2/JPEG/MP3/
MP3/WMA
WMA: ISO 9660 Nivel 1, Nivel 2,
WAV/AAC
Romeo, Joliet
MPEG4
DVD-VR/DVD+VR
DVD-RAM
Dual Disc Lado DVD
Lado no-DVD
CD/VCD CD de audio/CD Text (CD-DA)
VCD (Vídeo CD)
DTS-CD
SVCD (Súper Vídeo CD)
CD-ROM
CD-I (CD-I Ready)
CD-G
CD Grabable/reescribible CD-DA
(CD-R/-RW) MP3/WMA
• ISO 9660 Nivel 1, Nivel 2, JPEG
Romeo, Joliet
DivX/MPEG1/MPEG2
WAV/AAC
MPEG4
*1 Si inserta un disco DVD Vídeo de un código de región incorrecto, aparecerá “Disc region incorrect” en el monitor.
*2 Un DVD-R grabado en formato de múltiples bordes también es reproducible (excepto los discos de doble capa).
Los discos DVD-RW de doble capa no se pueden reproducir.
*3 Es posible reproducir discos finalizados +R/+RW (sólo formato de vídeo).
Los discos +RW de doble capa no se pueden reproducir.
*4 DivX Ultra no se puede reproducir.
ESPAÑOL
General Language
General Language
3 : 45
1 2 3
4 5 6
7 8 9
1
0 OK
1 2 Audio ASP MISC
2
Cancela la última entrada
2 TUNER 12:00 AM
SETUP MENU BACK
General Language
ST FM-1 87.5 MHz
Radio : S-Amer1
P-01 87.7 MHz Clock : 03:45 AM
P-02 89.9 MHz Clock Mode : 12Hr
P-03 97.9 MHz TFT Auto Open : Off
P-04 105.9 MHz Version B/E:901.04.1.080512
P-05 107.9 MHz Audio ASP MISC
AS PS SCAN DX DISP
AM PM
Vuelve a la pantalla anterior. 4 Finalice el procedimiento.
(dos veces)
Main Menu BACK
SETUP MENU BACK
General Language
TUNER DISC AUX IN AV-IN
Radio : S-Amer1
LOCK
Clock : 03:45 PM
USB iPod SD CAMERA Clock Mode : 12Hr
TFT Auto Open : Off
MONITOR Version B/E:901.04.1.080512
OFF
SET UP
Audio ASP MISC
9
OPERACIONES
AS PS SCAN DX DISP
2 Fuente actual *
Main Menu BACK Indicación de nivel de volumen
TUNER 3:45 PM
TUNER DISC AUX IN AV-IN
ST FM-1 87.5 MHz
LOCK
AS PS SCAN DX DISP
Toque la fuente de destino.
En la unidad: En el control
remoto:
10
Imagen reproducida
ESPAÑOL
P-04 105.9 MHz
P-05 107.9 MHz 3
AS PS SCAN DX10 DISP
3 Finalice el procedimiento.
2 Main Menu BACK
LOCK
MONITOR
OFF
SET UP
TUNER 3:45 PM
AS PS SCAN DX DISP
LOC DX
El botón cambia a LOC y solamente se detectan las emisoras con una señal suficientemente fuerte.
• Cada vez que pulsa el botón, la fuente cambia entre DX y LOC.
12
TUNER 3:45 PM
TUNER 3:45 PM
ST FM-1 92.5 MHz
ST FM-1 87.5 MHz
ESPAÑOL
P-01 1
87.7 MHz
P-01 1
87.7 MHz P-02
P-03
89.9
97.9
MHz
MHz
P-02 89.9 MHz
P-03 97.9 MHz P-04 92.5 MHz
P-04 105.9 MHz P-05 107.9 MHz
P-05 107.9 MHz AS PS SCAN 2DX DISP
AS PS SCAN DX DISP
Almacenamiento manual 1
4
2
5
3
6
1 Sintonice la emisora que desea almacenar. 7 8 9 1
☞ página 12 0 OK
AS PS SCAN DX DISP
2 Seleccione un número de preajuste. 2
TUNER 3:45 PM Cancela la última entrada.
ST FM-1 92.5 MHz
AS PS SCAN DX DISP
2
TUNER 3:45 PM
AS PS SCAN DX DISP
P-01 1
87.7 MHz
P-02 89.9 MHz
P-03 97.9 MHz
P-04 105.9 MHz
P-05 107.9 MHz
TUNER 3:45 PM
AS PS SCAN DX DISP
ST FM-1 87.5 MHz
2
FM-1
P-01 1
87.7 MHz
P-02 89.9 MHz
P-03 97.9 MHz
P-04 105.9 MHz
P-05 107.9 MHz
AS PS SCAN DX DISP
2
La unidad sintoniza las emisoras preajustadas durante
aproximadamente 10 segundos por emisora.
• Luego de sintonizar todas las emisoras preajustadas,
la unidad sintoniza la del número de preajuste 1.
Para detener el escaneo, pulse PS otra vez.
14
ESPAÑOL
Si aparece “ ” en el monitor, significa que la unidad no puede aceptar la operación intentada.
• En algunos casos, puede suceder que no se acepte la operación sin que se visualice el mensaje.
Ÿ
Lado de la etiqueta
• Si “TFT Auto Open” está ajustado a “On”, el monitor sale automáticamente al encender la unidad. (☞ página 42)
• Si desea información sobre el espacio requerido para la expulsión del monitor, consulte la página 55.
15 OPERACIONES
Mientras se reproduce una imagen, es posible realizar algunas operaciones con sólo tocar el área especificada de
la pantalla. (☞ debajo)
ESPAÑOL
Mientras se reproduce una imagen, es posible utilizar los botones de operaciones básicas visualizados sobre la
imagen reproducida. (☞ página 17)
• Operaciones en la pantalla de lista
Para
Imagen reproducida
16
ESPAÑOL
subtítulos.*2 (☞ página 21)
Selecciona el idioma/canal de
audio. (☞ página 21)
Selecciona el modo de
Detiene la reproducción. Realiza la repetición A-B. (☞ página 26) repetición. (☞ página 23)
Búsqueda regresiva*3 Búsqueda progresiva*3
Comienza la reproducción/pausa.
*4
Imagen reproducida
*4
*4 Imagen reproducida
17 OPERACIONES
En situación de parada...
Nº de pista actual/Nº total de pistas en la carpeta actual Mientras la reproducción está detenida
ESPAÑOL
En situación de parada...
3 : Inicia la reproducción (Slide show).*1
Se visualiza “Main Menu” en la unidad. 1 ¡ 4 ¢ : *2
7 Stop
DISC JPEG 3:45 PM
18
ESPAÑOL
Búsqueda hacia atrás/ Track Title Visualiza la página
adelante*4 Track Title anterior.
Track Title
4¢:
Track Title
Selecciona la pista. Visualiza la página
Track Title
*5 siguiente.
Detiene la reproducción. 7 SCAN DISP
Visualiza la información de la
Visualiza el contenido de la carpeta siguiente/anterior.
etiqueta. (☞ página 24)
(☞ página 20)
Activa/desactiva el modo Shuffle
Activa/desactiva el modo de escaneo. (☞ página 23) (aleatorio). (☞ página 23)
Visualiza los botones de los números en pantalla. Selecciona el modo de repetición. (☞ página 23)
*1 La próxima vez que inicie la reproducción, se realizará desde la primera pista de la carpeta actual.
*2 Estos botones no funcionan.
*3 Mientras la reproducción está en pausa o detenida, o durante la búsqueda hacia atrás/hacia adelante, este botón
cambia a 3 (reproducción).
*4 Velocidad de búsqueda: x2 ] x4 ] x8 ] x16 ] (Reproducción normal)
Para reanudar la reproducción normal durante la búsqueda, pulse 3.
*5 Aparece el número de pista para los CDs convencionales (por ej.: “Track08.CDA”).
19 OPERACIONES
01/14 01:35
20
ESPAÑOL
D 5.1Ch Eng D 5.1Ch Fre
D 5.1Ch Spa
Search
Search 1 Track ---
1 Title --- 2 Time - -:- -:- -
2 Chapter ---
3 Time - -:- -:- -
En el control remoto:
1 Visualice la pantalla de búsqueda. 3
2 Seleccione una opción. 4 Finalice el procedimiento.
22
ESPAÑOL
02/14 01:35 File Name
File Name
. .Current Folder Name
7 SCAN DISP
File Name
File Name
File Name
File Name
7 SCAN DISP single Folder all off
23 OPERACIONES
0
1 Tipo de disco/tipo de archivo
2 Nº de título actual (carpeta)/Nº total de títulos
Puede visualizar la información sobre reproducción. (carpetas)
ESPAÑOL
6 4 8
DISC MP3 3:45 PM
Para MPEG
02/14 01:35
1 3
MPEG Time 00:13:24/01:25:15 Name: Track Title
Track 10/12
Artist: Artist Name
Album: Album Name
6
7 SCAN DISP
Para JPEG
1 6
JPEG Track 10/12
• Aparece el mensaje “Unknown” para los CD
convencionales o cuando el archivo no posee
información de etiqueta.
24
ESPAÑOL
reproducir en absoluto, y que otros se Screen saver : On
reproduzcan omitiendo escenas de nivel superior. Audio ASP MISC
• Este ajuste sólo tiene efecto en los DVD Vídeo
que contienen información sobre el nivel de
restricción. SETUP MENU Enter Password BACK
General Language
TS Calibrate : No
Set Password :---- 4. PG-13
Parental control : 8. Adult 5. PG-R
Aspect Ratio : 16:9 6. R 2
Screen saver : On1
Audio ASP MISC
Detiene la reproducción.
Comienza la reproducción/pausa (si lo pulsa durante la
reproducción).
ESPAÑOL
26
ESPAÑOL
Búsqueda hacia atrás/
Selecciona la pista. adelante*1. (El sonido no se
escucha.)
Selecciona la pista.
Selecciona la pista (dentro de la
Búsqueda de pista/tiempo. misma carpeta).
(☞ página 22)
Selecciona el modo de
Selecciona el modo de repetición. repetición. (☞ página 23)
(☞ página 23)
Selecciona el canal de audio (ST: Amplía con el zoom.*2
estéreo, L: izquierdo, R: derecho).
Repetición del pasaje deseado—Repetición A-B
Amplía con el zoom.*2
1 Seleccione la posición de inicio (A)*3.
Cancela/reanuda la reproducción
de PBC.
2 Seleccione la posición de fin (B)*3.
Durante la reproducción PBC...
= : Para cancelar la repetición A-B:
:
Se desplaza a la página siguiente/anterior del
menú actual.
*1 Ampliación: +1 ] +2 ] +3 ] Off
*2 Velocidad de búsqueda: x2 ] x4 ] x8 ] x16 ] (Reproducción normal)
Para reanudar la reproducción normal durante la búsqueda, pulse 6.
28
ESPAÑOL
Pro Logic y el símbolo de la doble D son marcas General Language
comerciales de Dolby Laboratories. DownMix : FULL 6CH
Front Speakers : Large Large
1 Toque este área. (☞ página 16) Center Speaker : None Small
Sur Speakers : None None
Subwoofer : None 1 2
Audio ASP MISC
5 Finalice el procedimiento.
(dos veces)
Vuelve a la pantalla anterior. SETUP MENU BACK
General Language
Main Menu BACK
DownMix : FULL 6CH
General Language
Vuelve a la pantalla anterior.
DownMix : DownMix
Front Speakers : Large
Center Speaker : None 6CH Audio
Sur Speakers : None
Subwoofer : None VOL 15 – +
Puede usar los modos Dolby Pro Logic II para General Language
reproducir un sonido espacioso desde las fuentes de 2 Down sampling : On
canales, excepto para discos DivX/MPEG1/MPEG2. Decode Mode : Pro Logic
Panorama : Off
Dim Ctrl : Off
Efectúe los pasos 1 y 2 de la página 29 y luego... C W Ctrl : Off
ESPAÑOL
30
ESPAÑOL
• Asegúrese de tener una copia de respaldo de todos los datos importantes.
31 OPERACIONES
02/14 01:35
Tipo de
Scan Repeat Shuffle
archivo
On (SCAN): Se reproducen los single ( ): Repetir la pista Shuffle ( ): Mezcla todas
primeros 10 segundos de actual. las pistas de la carpeta
cada pista. Folder ( ): Se repiten todas actual y las reproduce
las pistas de la carpeta aleatoriamente, luego
actual. continúa con las pistas de
all ( ): Se repiten todas las las siguientes carpetas.
pistas.
Track ( ): Repetir la pista
actual.
Folder ( ): Se repiten todas
— las pistas de la carpeta —
actual.
all ( ): Se repiten todas las
pistas.
32
ESPAÑOL
• La reproducción se detiene después que se reproduzcan todas las pistas del dispositivo de clase de
almacenamiento masivo USB.
• Si vuelve a iniciar la reproducción luego de cambiar la fuente o de apagar la unidad, la reproducción se iniciará
desde la primera pista.
• Asegúrese de tener una copia de respaldo de todos los datos importantes.
* Excepto archivos MPEG2 grabados mediante la cámara JVC Everio (código de extensión <.mod>).
Precaución:
• Evite usar el dispositivo USB si puede amenazar la seguridad de conducción.
• No extraiga ni fije repetidas veces el dispositivo USB mientras “Reading...” se encuentra visualizado en la
pantalla del monitor.
• No ponga en marcha el motor del coche si hay un dispositivo USB conectado.
• Detenga la reproducción antes de desconectar un dispositivo USB.
• No deje el dispositivo USB en el coche expuesto a la luz directa del sol o a altas temperaturas pues se podrá
producir deformación o daños en el dispositivo.
• Si desea más información acerca de las operaciones USB, ☞ página 49
33 OPERACIONES
02/14 01:35
USB MP3 3:45 PM
* También podrá usar el control remoto. Se visualiza el icono del modo de reproducción del
modo seleccionado.
USB MP3 S 3:45 PM
02/14 01:35
Tipo de
Scan Repeat Shuffle
archivo
On (SCAN): Se reproducen los single ( ): Repetir la pista Shuffle ( ): Mezcla todas
primeros 10 segundos de actual. las pistas de la carpeta
cada pista. Folder ( ): Se repiten todas actual y las reproduce
las pistas de la carpeta aleatoriamente, luego
actual. continúa con las pistas de
all ( ): Se repiten todas las las siguientes carpetas.
pistas.
Track ( ): Repetir la pista
actual.
Folder ( ): Se repiten todas
— las pistas de la carpeta —
actual.
all ( ): Se repiten todas las
pistas.
34
Precaución:
ESPAÑOL
Cable especial para iPod
(suministrado) • Evite utilizar el iPod si esto puede poner en
peligro su seguridad cuando conduce.
• Para evitar el borrado accidental, asegúrese
de sacar copia de respaldo de todos los datos
importantes.
~ Conecte un iPod.
La reproducción se inicia automáticamente desde el punto de detención anterior.
• Si ha conectado un iPod, seleccione “iPod” para la fuente. (☞ página 10)
Ÿ Ajuste el volumen.
(☞ página 10)
! Ajuste el sonido según se desee.
(☞ página 39)
Se visualiza “Main Menu” en la unidad. Nº de pista/Nº total de pistas
iPod 3:45 PM
* Cuando se pausa la reproducción, o durante una búsqueda hacia atrás/hacia delante, este botón en pantalla
cambia a 3 (reproducir).
35 DISPOSITIVOS EXTERNOS
0/0 00:00
Para volver a la pantalla anterior
Track Title Waiting for Video Signal
SCAN DISP
SCAN DISP
01/57 01:35
ESPAÑOL
Track Title
Track Title
Modo de escaneo Modo Shuffle Track Title
01/57 01:35
Name: Track Title
Track Title Artist: Artist Name
Track Title
Album: Album Name
Track Title
Track Title
SCAN DISP
Track Title
SCAN DISP
01/57 01:35
37 DISPOSITIVOS EXTERNOS
frontal
• Cámara de retrovisión a la clavija CAMERA de la parte trasera de la unidad
Mini-clavija estéreo
1 Seleccione la fuente.
(☞ página 10)
• Cuando se conecta el conductor de la lámpara de marcha atrás (consulte el manual de instalación/conexión),
la fuente cambia automáticamente a “CAMERA” al poner el engranaje en la posición de marcha atrás (R).
2 Encienda el componente conectado y comience a reproducir la fuente.
3 Ajuste el nivel de volumen.
38
ESPAÑOL
AUDIO SETTING
SW 0 – + FADE 0 R F
39 AJUSTES
ajústelo.
solamente) a R9 (altavoz trasero
solamente)
SW (nivel –7 a 7 3 Finalice el procedimiento.
de salida del
subwoofer)*
LOUD Activado/desactivado
(sonoridad)
3 Finalice el procedimiento.
AUDIO SETTING
EQ < Jazz >
BASS – +
Treble – +
BAL 0 L R
FADE F3 R F
SW 0 – +
LOUD < Off >
40
ESPAÑOL
Subtitle : English French
Audio : English Spanish
Ej.: Cambio del ajuste “Subtitle” 1
2
1 TUNER 3:45 PM
Audio ASP MISC
MONITOR
OFF
5 Finalice el procedimiento.
SET UP (dos veces)
SETUP MENU BACK
41 AJUSTES
Language (Idioma)
Opciones del menú Configuraciones seleccionables, [página de referencia]
Language (Idioma) Seleccione el idioma para las indicaciones mostradas en el monitor.
English, French, Spanish, Chinese, Korean, Russian
DVD menu (Menú Selecciona el idioma inicial del menú de disco.
DVD) English, French, Spanish, Chinese, Korean, Russian
Subtitle (Subtítulo) Seleccione el idioma de subtítulos inicial.
English, French, Spanish, Chinese, Korean, Russian, Auto, Off
Audio Selecciona el idioma de audio inicial.
English, French, Spanish, Chinese, Korean, Russian
42
ESPAÑOL
Front Speakers (Altv/ Puede ajustar el tamaño de los altavoces.
delanteros)*2, • Front speakers: Large, Small
Center Speaker (Altv/ • Center Speaker: Large, Small, None
central)*2, • Sur Speakers: Large, Small, None
Sur Speakers (Altv/ • Subwoofer: None, Present
surround)*2, • Speaker size: “Large” para 13 cm de diámetro o más; “Small” para 13 cm o menos.
Subwoofer*2 • Si selecciona “Large” o “Small” para altavoces no conectados, las señales entrantes
para los altavoces no conectados no serán emitidas por los demás altavoces.
• Para los altavoces delanteros y Surround: No es posible realizar separadamente el
ajuste izquierdo y derecho.
Test tones (Ruido Seleccione un altavoz para que se emita el tono de prueba.
Rosa) Off, Left, Right, Center*2, Left surr.*2, Right surr.*2, Subwoofer*2
• Para desactivar el tono de prueba, seleccione “Off”.
Center delay (Retr/ Puede ajustar la sincronización de salida del altavoz central y los altavoces Surround.
ctral.), Surr. delay Seleccione la distancia de los altavoces desde la posición de escucha.
(Retr/surround) • Center delay: No Delay, 0.3m, 0.6m, 1m, 1.4m, 1.7m
• Surr. delay: No Delay, 1m, 2m, 3m, 4m, 5.1m
Night Mode (Modo Podrá disfrutar de un sonido potente a bajos niveles de volumen mientras se
nocturno) reproduce un software Dolby Digital.
Off: Selecciónelo para desactivar esta función.
On: Selecciónelo para aplicar el efecto al software codificado multicanal.
Pro Logic Activa o desactiva el modo Pro Logic II (Pro Logic, PLII Matrix, PLII Movie, PLII Music),
☞ [30]
Off, On, Auto
Down sampling Normalmente seleccione “Off”. Si el sonido está distorsionado, seleccione “On”.
(Submuestreo)
Decode Mode (Modo Seleccione el modo Pro Logic II que desea, ☞ [30]
decodif.)*3 Off, Pro Logic, PLII Matrix, PLII Movie, PLII Music
*1 Este ajuste sólo tiene efecto para los discos con codificación multicanal Dolby Digital.
*2 No está disponible cuando “DownMix” está ajustado a “DownMix”.
*3 Disponible solamente para una fuente de 2 canales de disco, excepto para discos DivX/MPEG1/MPEG2.
(Ctrl/atenuac.) localización del sonido se mueve hacia adelante (normalmente seleccione “3”).
0 a 6; Inicial 3
C W Ctrl Ajuste la imagen central de manera que pueda escucharse sólo del altavoz central,
(Ctrl/anch/ctral.) sólo por los altavoces delanteros izquierdo/derecho como una imagen “fantasma”, o
de diversas combinaciones de estos altavoces. Conforme aumenta el número, el efecto
“fantasma” se intensifica (normalmente seleccione “3”).
0 a 6; Inicial 3
ASP
Opciones del menú Configuraciones seleccionables, [página de referencia]
Bass Freq (Frec/bajos) Seleccione la frecuencia para el ajuste de los sonidos graves.
60Hz, 80Hz, 100Hz, 200Hz
Treble Freq (Frec/ Seleccione la frecuencia para el ajuste de los sonidos agudos.
agudos) 10kHz, 12.5kHz, 15kHz, 17kHz
Bass Q-Factor (Factor Ajusta la pendiente de calidad (Q-slope) para los sonidos graves.
Q/graves) 1.0, 1.25, 1.5, 2.0
iPod Gain, AuxIn Gain, Ajusta y almacena el nivel de volumen de ajuste automático para cada fuente. El nivel
DVD Gain*1*2, Tuner de volumen aumenta o disminuye automáticamente al cambiar la fuente.
Gain –7 a +7; Inicial 0
44
ESPAÑOL
Contraseña)*3
Parental control Seleccione el nivel de restricción para la reproducción de DVD Vídeo. ☞ [25]
Kid Safe (más restrictivo), G, PG, PG-13, PG-R, R, NC-17, Adult (menos restrictivo)
Aspect Ratio (Nitidez Seleccione la relación de aspecto de la imagen.
de TV) 4:3, 16:9
Screen saver (Protec. Activa/desactiva el salvapantalla.
pantalla) Off, On
Load Factory (Cargar Seleccione “Yes” para reinicializar la unidad.
fábrica)*4 No, Yes
• Cuando selecciona “Yes”, aparece el menú de confirmación. Seleccione “Yes”. La
unidad se apaga, y se vuelve a encender.
DivX Registration Esta unidad dispone de su propio código de registro. Una vez que se reproduzca un
(Registro de DivX) archivo que tenga grabado el código de registro, el código de registro de esta unidad
será sobrescrito para protección de los derechos de autor.
Calibración A D
Tras seleccionar “Yes” para “TS Calibrate”, la guía de calibración aparecerá
en el monitor, tal como se describe a la derecha.
Toque “ ” que aparece en cada esquina (A – D), uno tras otro. Please press point A at upper left corner
• Toque “ “ lentamente y con cuidado. Toque repetidamente “ “ hasta
que aparezca la siguiente marca cuando no aparece mediante un solo
toque.
• Cuando la unidad detecta que usted ha tocado correctamente todas las B C
partes “ “, se cierra la pantalla de calibración.
*1 No es posible cambiar el ajuste “DVD Gain” cuando “DownMix” esté ajustado a “FULL 6CH”. (☞ página 43)
*2 El ajuste para “DVD Gain” también se aplica a SD y USB.
*3 Recuerde su contraseña o apúntela en algún sitio. Necesitará introducir la contraseña para cambiar el ajuste o
cancelar la restricción.
*4 Los ajustes para el reloj (“Clock”) y el control paterno (“Set Password” y “Parental control”) no se inicializan.
45 AJUSTES
ESPAÑOL
se iniciará automáticamente la próxima vez que
• Utilice sólo discos “finalizados”.
encienda la unidad.
• Este receptor puede reproducir discos multisesión;
FM/AM no obstante, las sesiones no cerradas serán omitidas
durante la reproducción.
Cómo almacenar emisoras en la memoria • Esta unidad puede reconocer un total de 24 caracteres
• Al finalizar la búsqueda automática, las emisoras para los nombres de archivos/carpetas.
recibidas se preajustan en “P-01” (frecuencia más • Es posible que algunos discos o archivos no se puedan
baja) a “P-06” (frecuencia más alta). reproducir debido a sus propias características o
condiciones de grabación.
Disco
Restricción de la reproducción
General • Si introduce una contraseña incorrecta, aparece
• En este manual, las palabras “pista” y “archivo” se “Password Error”. Ingrese la contraseña correcta.
utilizan indistintamente.
• La unidad puede reproducir un disco en el que se han Cómo disfrutar de sonidos Surround
grabado diferentes tipos de archivos. Los archivos se • La reproducción surround sólo se encuentra
reproducen en el orden en el cual fueron grabados. disponible para “DISC”.
• La unidad puede reproducir un disco que contenga • No podrá activar Surround para DVD Vídeo MPEG
archivos CD (CD-DA) y archivos de audio/vídeo. multicanal, y fuentes DivX de 2 canales y MPEG
• Cuando se inserta un disco al revés o un disco que de 2 canales. Los sonidos estéreo se emiten
no tenga archivos reproducibles, aparecerá “Please solamente a través de los altavoces delanteros,
Eject” en el monitor. Saque el disco. independientemente del ajuste Surround
(“DownMix” y “Pro Logic”).
• Si no saca el disco expulsado en el lapso de 10
segundos, será reinsertado automáticamente en la Reproducción de archivo
ranura de carga para protegerlo contra el polvo.
Reproducción de archivos DivX
• Esta unidad puede reproducir archivos DivX con el
código de extensión <.divx>, <.div>, <.avi> (sin
distinción de caja—mayúsculas/minúsculas).
• “Audio stream” debe cumplir con MP3 o Dolby
Digital.
• Puede suceder que el archivo codificado en el modo
de escaneo entrelazado no se pueda reproducir
correctamente.
• La máxima velocidad de bit para las señales de vídeo
es 4 Mbps (promedio).
47 REFERENCIAS
48
ESPAÑOL
Antes de proceder, asegúrese de respaldar los datos). • Si el iPod no puede reproducir correctamente, sírvase
• La unidad no puede reconocer ningún dispositivo USB actualizar el software de su iPod a la versión más
que tenga un régimen distinto de 5 V y que exceda de reciente. Si desea información sobre cómo actualizar
500 mA. su iPod, visite <http://www.apple.com>.
• Mientras se reproduce desde un dispositivo USB, el • Al encender esta unidad, el iPod se carga a través de
orden de reproducción puede ser diferente de otros la unidad.
reproductores. • Puede controlar el iPod desde la unidad cuando en la
• Puede suceder que esta unidad no pueda reproducir pantalla del iPod aparezca “JVC” o “ ” después de la
algunos dispositivos USB o algunos archivos debido a conexión.
sus características o a las condiciones de grabación. • El orden de las canciones mostrado en el monitor de
• Los dispositivos USB equipados con funciones la unidad puede diferir del que se encuentra en el
especiales, como por ejemplo, funciones de seguridad iPod.
de datos, no se pueden usar con esta unidad. • La información de texto podría no visualizarse
• No utilice un dispositivo USB con 2 o más particiones. correctamente:
• Dependiendo la forma de los dispositivos USB y de los – Las letras con acento y ciertos caracteres no se
puertos de conexión, puede suceder que algunos de pueden visualizar correctamente en el monitor.
ellos no puedan conectarse correctamente o que haya – La comunicación entre el iPod y la unidad no es
flojedad en la conexión. estable.
• Cuando conecte un dispositivo USB, consulte también • Esta unidad puede reconocer hasta un total de 20
sus correspondientes instrucciones. caracteres.
• Conecte a la unidad un solo dispositivo por vez. No
utilice un hub USB. Nota:
• Puede suceder que esta unidad no pueda reconocer Cuando opera un iPod, algunas operaciones pueden
un dispositivo USB conectado a través de un lector de no funcionar correctamente o como se desea. En tal
tarjetas USB. caso, visite el siguiente sitio web de JVC: <http://
• Puede suceder que esta unidad no pueda reproducir www.jvc-victor.co.jp/english/car/>
correctamente archivos en un dispositivo USB cuando
se utilice un cable prolongador USB.
• Esta unidad no puede asegurar un correcto
funcionamiento o suministro de alimentación a todos
los tipos de dispositivos.
• Esta unidad puede reconocer un total de 1 500
archivos y 200 carpetas (un máximo de 1 500 archivos
por carpeta).
• Esta unidad puede reconocer un total de 14 caracteres
para los nombres de archivos/carpetas.
• Para archivos MPEG1/2: La máxima velocidad de bit
para las señales de vídeo es 2 Mbps (promedio).
49 REFERENCIAS
50
ESPAÑOL
Síntomas Soluciones/Causas
• El sonido no sale del altavoz central. • El altavoz central no está activado. (☞ página 43)
• El altavoz central se utiliza sólo para la reproducción
Surround. El sonido no sale para la reproducción en
estéreo.
• No sale sonido de los altavoces traseros y del Los altavoces traseros y el subwoofer no están activados.
subwoofer. (☞ página 43)
• El monitor no está claro ni legible. Este síntoma puede ser causado por los reflejos de la luz del
General
sol en el parabrisas.
Ajuste el brillo del monitor. (☞ página 11)
• Aparece “SD Loading Error” en el monitor. La tarjeta SD no está completamente insertada. Insértela
completamente en la ranura para cerrar la puerta.
• Aparece “No Signal”. • Cambia la fuente.
• Inspeccione los cables y las conexiones.
• La señal de entrada es muy débil.
• El receptor no funciona en absoluto. Reinicialice la unidad. (☞ página 3)
• El AS (Almacenamiento automático) no Almacene manualmente las emisoras. (☞ página 13)
FM/AM
funciona.
• Ruidos estáticos mientras se escucha la radio. Conecte firmemente la antena.
• Los discos no se pueden reconocer ni Cambie el disco.
reproducir.
• No se pueden reproducir los discos grabables/ • Inserte un disco finalizado.
reescribibles. • Finalice los discos con el componente utilizado por usted
• No se pueden saltar las pistas de los discos para la grabación.
grabables/reescribibles.
Discos en general
52
ESPAÑOL
reproducción. Desconecte la alimentación y vuélvala a
conectar.
iPod
• No se escucha ningún sonido al conectar un • Desconecte los auriculares del iPod nano.
iPod nano. • Actualice la versión de firmware del iPod nano.
• Aparece “No Files” en el monitor. No hay pistas almacenadas. Importe pistas al iPod.
• Los controles del iPod no funcionarán Reinicialice el iPod.
después de desconectarlo de esta unidad.
• Aparecerá “Cannot play” en el monitor. Ha ocurrido un error de comunicación. Desconecte y vuelva
a conectar el cable al iPod.
• Aparece “NO VIDEO SIGNAL” en el monitor. • Encienda el componente de vídeo, si no está encendido.
• Conecte correctamente el componente de vídeo.
AV-IN
• La imagen reproducida no es clara ni legible. Ajuste el brillo del monitor. (☞ página 11)
• El sonido no se escucha. Verifique el cable de conexión y su conexión.
53 REFERENCIAS
Gama de control de tono: Graves: ±14 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
Agudos: ±14 dB (10 kHz, 12,5 kHz, 15 kHz,
17 kHz)
AMPLIFICADOR
Gama dinámica: 93 dB
Relación señal a ruido: 95 dB
Lloro y trémolo: Inferior al límite medible
54
Capacidad 2 Gbytes
Velocidad de transferencia Máximo 10 Mbps
de datos
Normas USB: USB 1.1
Velocidad de transferencia Toda velocidad: Máximo 12 Mbytes
ESPAÑOL
de datos Baja velocidad: Máximo 1,5 Mbytes
USB
43
Unidad: mm 44
55 REFERENCIAS
EN, SP
© 2008 Victor Company of Japan, Limited 0508MNMMDWSKP