Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UNDERGROUND DRILLS
Track mounted ITH drill - The 6200 can be used to drill from
Requires air booster. 3 1/2 inch (89 mm) to 6 1/2 inch
(165 mm)) diameter holes to a depth
Utilizes standard Cubex greater than 330 ft. (100 m). With
components for: options, it can also be used for
6200 - Feed system drilling 8-1/2 inch (216 mm) holes
- 6230 Top Drive and occasionally reaming up to 17-
- Hydraulic system 1/2 inch (445 mm) diameter holes
with a 12 inch hammer and up to 30
inch (762 mm) diameter holes with a
Optional Models V-30 raise attachment. Slot raises
can be drilled with a Slit Hammer.
6200 W – Wassara water
Drilling:
- Requires water booster
Track mounted ITH With on- - The 5200 can be used to drill from
5200 board Booster. Utilizes 3 1/2 inch (89 mm) to 6 1/2 inch
standard Cubex components (165 mm) diameter holes to a depth
for: greater than 330 ft. (100 m). With
- Feed system options, it can also be used for
- 6230 Top Drive drilling 8-1/2 inch (216 mm) holes
- Hydraulic system and occasionally reaming up to 17-
1/25 inch (445 mm) diameter holes
with a 12 inch hammer and up to 30
inch (762 mm) diameter holes with a
V-30 raise attachment. Slot Raises
can be drilled with a Slit Hammer.
Track mounted ITH drill with - The Orion can be used to drill from
heavy slide over and carousel. 3 1/2 inch (89 mm) to 6 1/2 inch
The Orion can be built with a (165 mm) diameter holes to a depth
lower profile carousel for greater than 330 ft. (100 m). With
Orion tighter access. options, it can also be used for
drilling 8.5 inch (216 mm) holes and
Utilizes standard Cubex occasionally reaming up to 17.5
components for: inch (445 mm) diameter holes with
- Feed system a 12 inch hammer and up to 30 inch
- 6230 Top Drive (762 mm) diameter holes with a V-
- Hydraulic system 30 raise attachment.
Optional Models
2
UNDERGROUND DRILLS
Standard Models Performance
ITH drill mounted on a rubber - The Aries can be used to drill from
tired carrier. Standard with 3.5 in. (89 mm) to 6 in. (165 mm)
heavy slideover, Onboard diameter holes to a depth greater
Booster and Carousel than 330 ft. (100 meters) down hole.
Aries WITH OPTIONS: It can also be
Utilizes standard Cubex used for drilling 8.5 in. (216 mm)
components for: holes and occasionally reaming up
- Feed system to 17.5 in. (445 mm) holes with a 12
- 6230 Top Drive in. hammer and up to 30 in. with the
- Hydraulic system V-30 raise attachment.
Optional Models
Aries Jr.
Same as Aries but utilizes a
smaller hydrostatic drive
carrier.
Optional Model
LH1C:
A Top Hammer unit that is
convertible to ITH. This unit is
track mounted.
Aquila C
A Top Hammer unit that is
convertible to ITH. This unit
utilizes a rubber tired carrier
and is standard with an
onboard booster.
Uses slideover arrangement
for feed positioning.
3
UNDERGROUND DRILLS
4
SURFACE DRILLS
Standard Models Performance at Sea Level
A track mounted DTH drill with - The QXR 920 can be used
onboard screw compressor and to drill up to COP 44 at 34.5
carousel. Uses boom for bar and COP 65 at 33 bar.
positioning
- The QXR 1120 can be
QXR 920 used to drill up to COP 55 at
Provides 900 cfm (425 l/s) at 500 34.5 bar and COP 64 at 30
psi (34.5 bar). bar.
5
MODULAR COMPONENTS
Feed System
A standard feed design is used throughout the Cubex fleet for both ITH and
Top Hammer. It is available in various lengths, capacities, and configurations
to provide maximum flexibility for various applications. Most wear components
are interchangeable for all configurations.
Carousel
Automated Drilling
Hydraulics
6
AIR BOOSTER COMPRESSORS
UNDERGROUND
Reciprocating Boosters
R55
R110 A single booster that delivers 700 scfm (354
l/s) of air at 350 psi (24 bar) discharge
pressure with mine air pressure at intake of 90
psi (6 bar).
R110
Dual boosters that deliver 1400 scfm (660 l/s)
of air at 350 psi (24 bar) discharge pressure
with mine air pressure at intake of 90 psi (6
bar).
R30
A single booster that delivers 700 scfm (354
l/s) of air at 150 psi (10 bar) discharge
pressure with mine air pressure at intake of 58
psi 46 bar).
R60
Dual boosters that deliver 1400 scfm (660 l/s)
of air at 150 psi (10 bar) discharge pressure
with mine air pressure at intake of 58 psi (4
bar).
Screw Boosters
S75
This delivers 650 scfm (306 l/s) of air at 350
psi (24 bar) discharge pressure with mine air
pressure at intake of 90 psi (6 bar).
S92
This delivers 850 scfm (401 l/s) of air at 350
psi (24 bar) discharge pressure with mine air
pressure at intake of 90 psi (6 bar).
S112
This delivers 1150 scfm (543 l/s) of air at 350
psi (24 bar) discharge pressure with mine air
pressure at intake of 90 psi (6 bar).
S150
This delivers 1400 scfm (660 l/s) of air at 350
psi (24 bar) discharge pressure with mine air
pressure at intake of 90 psi (6 bar).
7
WATER PUMP SYSTEMS
for the WASSARA® drill system
Standard Models
W175
The W175 Water Pump is designed to
supply water at 46gpm (175 liter/min.) @
2600 psi (179 bar) to an Orion-W or a
6200W Megamatic drill for drilling
underground. This unit is supplied water
from the mine’s distribution system.
W300
The W300 Water Pump designed to
supply water at 85 gpm (322 liter/min.)
@ 2600 psi (179 bar) to an Orion-W or a
6200W Megamatic drill for drilling
underground. This unit is supplied water
from the mine’s distribution system.
W600
The W600 Water Pump designed to
supply water at 160 gpm (604 liter/min.)
@ 2600 psi (179 bar) to an Orion-W or a
6200W Megamatic drill for drilling
underground. This unit is supplied water
from the mine’s distribution system.
8
ATMOSPHERIC SCREW COMPRESSORS
UNDERGOUND
Standard Models
750U125
This single stage screw compressor
package is designed to deliver 750 CFM
(354 l/s) @ 125psi (8.6 bar)
750U350
This two stage screw compressor
package is designed to deliver 750 CFM
(354 l/s) @ 350psi (24.1 bar)
1150U350
900U350
This two stage screw compressor
package is designed to deliver 900 CFM
(425 l/s) @ 350psi (24.1 bar)
1050U125
This two stage screw compressor
package is designed to deliver 1050
CFM (495 l/s) @ 125psi (8.6 bar)
1150U350
This two stage screw compressor
package is designed to deliver 1150
CFM (543 l/s) @ 350psi (24.1 bar)
1300U125
This two stage screw compressor
package is designed to deliver 1300
CFM (613 l/s) @ 125psi (8.6 bar)
1350U350
This two stage screw compressor
package is designed to deliver 1350
CFM (637 l/s) @ 350psi (24.1 bar)
1600U125
This two stage screw compressor
package is designed to deliver 1600
CFM (755 l/s) @ 125psi (8.6 bar)
2000U125
This two stage screw compressor
package is designed to deliver 2000
CFM (944 l/s) @ 125psi (8.6 bar)
9
SPECIAL APPLICATIONS
Heli-Drill
The Heli-Drill is low ground pressure
balloon tired articulated drill for off road
remote drilling. This drill breaks into 9
assemblies that are transportable by a
Heli-Drill Bell Ranger Helicopter.
Performance
The Heli-Drill is designed to drill holes
with a 3” (76mm), 4” (102mm), 5”
127mm) or 6 “ (152mm) DTH hammer to
a depth of 656 ft (200 m). Drilling
requires a separate compressor
package, consult factory for specification
based on application.
Optional
RC Drill package
Top Hammer configuration
HAS 100
Performance
The HAS-100 can drill both rotary bits or
with I-T-H hammers. It has been used to
drill with a 24 inch (609 mm) I-T-H
Reverse Circulation hammer, drilling
holes to a depth over 1300 ft. (400 m). It
drills up or down holes.
Arctic Drill
The ATD is designed for many
applications proven in Arctic operation.
This 2 speed versatile drill moves on a
Arctic Drill rubber tracked, air ride suspension, with
low ground pressure. The two man
pressurized cab designed for extreme
climate results in a highly productive
machine with quick set ups and rapid
penetration rates. The Rugged variable
speed top drive rotation and efficient
pipe handling for increased productivity
on the job site can be equipped for DTH,
Rotary, Auger or Core Drilling.
Performance
The ATD has a 750 cfm (354 l/s) @ 350
psi (24.1 bar) rotary screw compressor,
can provide 16,000 lb. of pull back and
has a hydraulic breakout system with
mechanized pipe handling. A fuel-
efficient CAT engine powers this unit.
The two man pressurized cab is
equipped with heat, A/C and all operator
controls.
10