Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Professional pp 06
Coaxial pp 30
Studio Monitor pp 36
Subwoofer pp 46
Midrange pp 54
Dual Cone pp 58
Compression Driver pp 64
Horn pp 71
Dome Tweeter pp 74
2
Our Company SICA was founded in Italy in 1979.
With over 30 years of experience, we have specialized in the manufacture of high performance
professional loudspeakers. Thanks to a solid background in Research & Development and with
eyes always focused on technological advances, our Company is today a reference point for
Manufacturers of Professional Audio and Musical Instruments. We have consolidated a tradition
of research in the best technical and musical solutions within a wide range of applications, in
cooperation with our Partners. Customers’ requirements and satisfaction are the ultimate goal
for our skilled team of Sound Engineers and Musicians.
We are also the only manufacturer of the famous JENSEN® guitar loudspeakers, that have been used
for decades in well-renowned electric guitar amplifiers. Studying some originals from the Sixties
and backed by the precious help of musicians and audiophiles, we restored to life the legends of
Rock and Roll guitar sounds. Today we enthusiastically drive JENSEN®’s adventure on, thanks to 3
many new models which make this brand much more than vintage alone.
SICA’s manufacturing process is entirely carried out in our plant based in Italy, near the town of
Senigallia, on the splendid Adriatic Sea coast.
All our Partners requirements are taken care of by our experienced team of Sound Engineers,
whose first aim is the maximum customer satisfaction. Every speaker component is engineered
in house by our technicians and then realized by specialized suppliers, using the finest materials.
Our Quality Control Department makes severe admission tests on all the components before
admitting them to the production. Our loudspeakers are manufactured under a highly automated
state-of-the art production process. 100% of our speakers are tested and checked through
sophisticated and advanced equipment, at the end of the production cycle.
The stability of our speakers is guaranteed through life tests performed on each model, so to
ensure their maximum reliability, durability and strength.
Our Sound Engineers inspect and test all speaker key parameters, checking both the overall acoustic
performance and the outward appearance of each production lot. All our speakers are matched
with a code identifying all the components used in each production lot and their test results. Our
speakers are delivered together with complete test reports, which enable the maximum trackability
to assure outmost customer assistance and satisfaction.
Being firmly convinced that there is no quality without respect and preservation of the environment,
we constantly pay the highest attention to comply with environment-friendly procedures and
international standards of quality, throughout the entire production cycle.
Nomenclature Legend
18 K 4 PL 8 Ω
Nominal impedance
CD 95 . 44 / N 240 TW 8 Ω
Nominal impedance
TW Tweeter
LP Loudspeaker
CD Compression driver
HFU High frequency unit
Datasheets Topics
The frequency response as per our data sheets is measured, unless otherwise specified, with the
loudspeaker mounted on an IEC baffle (DIN 45575), whereas the impedance curve is measured
in free air. The Thiele-Small parameters are measured by LASER sensor.
The X-max value is measured with respect to a Total Harmonic Distortion of 10%.
The X-var is the maximum excursion allowed by the loudspeaker and expressed in terms of variation
of T-S parameters. In particular, as its limit we fixed the value corresponding to a decay of the
Force Factor, or Compliance, or both, equal to 50% of the small signal value.
All the speakers described in our catalogue are 8Ω; additional impedance versions are available.
Due to continuing product improvement, the features are subject to change without notice.
POWER HANDLING
The Rated Power as stated on our data sheets is measured according to AES2-1984 standard, which
calls for a pink noise signal having a 6dB crest factor and band pass filtering to a decade in the
working range of the loudspeaker. The duration of the test is 2 hours, after which the loudspeaker
must not have any permanent change in characteristics greater than 10%. The Rated RMS Power is
calculated using the minimum electrical impedance value over the operating range of the speaker.
The cone speakers are tested while mounted in an enclosure, the compression drivers are tested
while coupled to the recommended horn.
The Continuous Program Power is specified as twice the rated power.
This procedure is applied to all our cone woofers and compression drivers.
The dome tweeters have an additional Rated Noise Power specification. It is measured according 5
to the International Standard IEC60268-5 which calls for a pink noise signal having a 6dB crest
factor and IEC program filtering to approximate the spectral content of real music. The test
duration is 100 hours.
QUALITY CONTROL
Our Quality Control Department inspects 100% of the production.
As for the cone speakers, 100% of the production is checked by acoustic test, whereas T-S
parameters are checked on representative samples.
As for the mass productions, an automatic check is conducted on Frequency response, Impedance
curve, rub & buzz, polarity and T-S parameters of each speaker.
The QC on compression drivers and dome tweeters runs automatically on 100% of production,
checking Frequency response, Impedance curve, Resonance frequency, rub & buzz and polarity.
P
NEODYMIUM
Professional
FERRITE
7
Professional
21 S 4 PL
21” | 2000 W Code Z008425
MADE IN ITALY
General Specifications
Nominal Diameter 545 mm / 21 in
Nominal Impedance 4Ω
Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 97.0 dB Frequency Response on 190 Litres Vented Box @ 1W, 0.5m, normalized to SPL 1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 25 mm Magnet Neodymium
Magnetic Gap Depth 17 mm Basket Material Aluminium Die-Cast
Flux Density 0.94 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Fiberglass
Net Weight 10.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 3.5 Ω Fs 38.7 Hz Surround Material Treated Cloth
Qms 4.19 Qes 0.48 Dust Dome Material Solid Paper
Qts 0.43 Mms 288.2 g Mounting Information
Cms 59 μm/N Bxl 22.56 Tm Overall Diameter 545 mm
Vas 229.8 I Sd 1661.9 cm2 Baffle Cutout Diameter 497 mm
X max (5) +/- 6.5 mm X var (6) +/- 11.5 mm Mounting Holes 8 holes 13x9 on ø 520 mm
η0 2.65% Le (1KHz) 1.60 mH Total Depth 245 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
18 K 4 PL
18” | 2000 W Code Z008402
General Specifications
Nominal Diameter 462 mm / 18 in
Nominal Impedance 8Ω
Rated Power AES (1) 1000 W MADE IN ITALY
18 S 4 PL 9
General Specifications
Nominal Diameter 462 mm / 18 in
Nominal Impedance 8Ω
Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 97.3 dB Frequency Response on 150 Litres Vented Box @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 27 mm Magnet Neodymium
Magnetic Gap Depth 12 mm Basket Material Aluminium Die-Cast
Flux Density 1.21 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Fiberglass
Net Weight 8.3 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.2 Ω Fs 36.2 Hz Surround Material Treated Cloth
Qms 6.56 Qes 0.42 Dust Dome Material Solid Paper
Qts 0.39 Mms 197.0 g Mounting Information
Cms 98 μm/N Bxl 23.54 Tm Overall Diameter 462 mm
Vas 189.0 I Sd 1164.2 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 7.5 mm X var (6) +/- 10.1 mm Mounting Holes 8 holes 6,5x9 on ø 441 mm
η0 2.07% Le (1KHz) 1.35 mH Total Depth 211 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
18 F 4 CP
18” | 1400 W Code Z008391
General Specifications
Nominal Diameter 462 mm / 18 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 700 W
Continuous Program Power (2) 1400 W
Sensitivity @ 1W/1m (3) 98.3 dB Frequency Response on 150 Litres Vented Box @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 22 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.31 T Voice Coil Winding Material Copper
Magnet Weight 3300 g Voice Coil Former Material Fiberglass
Net Weight 12.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 6.4 Ω Fs 38 Hz Surround Material Treated Cloth
Qms 5.52 Qes 0.31 Dust Dome Material Solid Paper
Qts 0.29 Mms 179.1 g Mounting Information
Cms 97 μm/N Bxl 29.77 Tm Overall Diameter 462 mm
Vas 185.2 I Sd 1164.2 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 6.2 mm X var (6) +/- 10.1 mm Mounting Holes 8 holes 6.5x9 on ø 441 mm
η0 3.22% Le (1KHz) 1.88 mH Total Depth 203.5 mm
10
18 F 3 CP
18” | 700 W Code Z008362
General Specifications
Nominal Diameter 462 mm / 18 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 96.4 dB Frequency Response on 150 Litres Vented Box @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 20 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.02 T Voice Coil Winding Material Copper
Magnet Weight 2045 g Voice Coil Former Material Aluminium
Net Weight 8.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 34 Hz Surround Material Treated Cloth
Qms 2.47 Qes 0.62 Dust Dome Material Solid Paper
Qts 0.49 Mms 156.4 g Mounting Information
Cms 136 μm/N Bxl 16.67 Tm Overall Diameter 462 mm
Vas 260.3 I Sd 1164.2 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 6.0 mm X var (6) +/- 10.5 mm Mounting Holes 8 holes 6.5x9 on ø 441 mm
η0 1.68% Le (1KHz) 1.41 mH Total Depth 197.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
15 K 4 PL
15” | 2000 W Code Z008339
General Specifications
Nominal Diameter 388 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 1000 W MADE IN ITALY
15 F 4 CP 11
General Specifications
Nominal Diameter 389 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 700 W
Continuous Program Power (2) 1400 W
Sensitivity @ 1W/1m (3) 99.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 21 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.30 T Voice Coil Winding Material Copper
Magnet Weight 3300 g Voice Coil Former Material Kapton
Net Weight 12.1 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 44.8 Hz Surround Material Treated Cloth
Qms 8.53 Qes 0.27 Dust Dome Material Solid Paper
Qts 0.26 Mms 136.0 g Mounting Information
Cms 94 μm/N Bxl 26.74 Tm Overall Diameter 388 mm
Vas 97.8 I Sd 855.3 cm2 Baffle Cutout Diameter 355 mm
X max (5) +/- 5.5 mm X var (6) +/- 7.8 mm Mounting Holes 8 holes 6x9 on ø 371 mm
η0 3.14% Le (1KHz) 1.48 mH Total Depth 169 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
15 K 3 PL
15” | 700 W Code Z008331
General Specifications
Nominal Diameter 388 mm / 15 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 99.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 20 mm Magnet Neodymium
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.42 T Voice Coil Winding Material Copper
Magnet Weight 560 g Voice Coil Former Material Kapton
Net Weight 4.0 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.3 Ω Fs 43 Hz Surround Material Treated Cloth
Qms 9.94 Qes 0.30 Dust Dome Material Solid Paper
Qts 0.29 Mms 96.2 g Mounting Information
Cms 150 μm/N Bxl 21.44 Tm Overall Diameter 388 mm
Vas 150.4 I Sd 855.3 cm2 Baffle Cutout Diameter 355 mm
X max (5) +/- 6.0 mm X var (6) +/- 11.0 mm Mounting Holes 4 holes 6x9 on ø 371 mm
η0 3.73% Le (1KHz) 0.60 mH Total Depth 169 mm
12
15 Fe 3 CP
15” | 700 W Code Z008308
General Specifications
Nominal Diameter 389 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 99.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 17 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.18 T Voice Coil Winding Material Copper
Magnet Weight 1800 g Voice Coil Former Material Fiberglass
Net Weight 8.1 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.2 Ω Fs 43.4 Hz Surround Material Treated Cloth
Qms 14.85 Qes 0.36 Dust Dome Material Solid Paper
Qts 0.35 Mms 94.4 g Mounting Information
Cms 142 μm/N Bxl 19.23 Tm Overall Diameter 388 mm
Vas 147.2 I Sd 855.3 cm2 Baffle Cutout Diameter 355 mm
X max (5) +/- 5.0 mm X var (6) +/- 8.5 mm Mounting Holes 8 holes 6x9 on ø 371 mm
η0 3.20% Le (1KHz) 1.22 mH Total Depth 163 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
15 L 2,5 SL
15” | 500 W Code Z008201
General Specifications
Nominal Diameter 385 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W MADE IN ITALY
15 E 2,5 CS 13
General Specifications
Nominal Diameter 385 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 96.2 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2.5 in Constructive Characteristics
Voice Coil Winding Depth 13 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.15 T Voice Coil Winding Material Copper
Magnet Weight 1450 g Voice Coil Former Material Aluminium
Net Weight 5.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.7 Ω Fs 47 Hz Surround Material Treated Cloth
Qms 3.42 Qes 0.60 Dust Dome Material Solid Paper
Qts 0.51 Mms 70.2 g Mounting Information
Cms 167 μm/N Bxl 15.02 Tm Overall Diameter 383 mm
Vas 135.0 I Sd 754.7 cm2 Baffle Cutout Diameter 360 mm
X max (5) +/- 3.4 mm X var (6) +/- 7.0 mm Mounting Holes 8 holes 6x9 on ø 372 mm
η0 2.13% Le (1KHz) 1.08 mH Total Depth 154.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
12 K 4 PL
12” | 2000 W Code Z008020
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 97.2 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 21 mm Magnet Neodymium
Magnetic Gap Depth 12 mm Basket Material Aluminium Die-Cast
Flux Density 1.10 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Kapton
Net Weight 6.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.2 Ω Fs 51.5 Hz Surround Material Treated Cloth
Qms 4.88 Qes 0.26 Dust Dome Material Solid Paper
Qts 0.25 Mms 95.0 g Mounting Information
Cms 102 μm/N Bxl 25.10 Tm Overall Diameter 320 mm
Vas 40.8 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 5.0 mm X var (6) +/- 7.2 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 2.07% Le (1KHz) 0.74 mH Total Depth 140.5 mm
14
12 F 4 CP
12” | 1400 W Code Z008019
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 700 W
Continuous Program Power (2) 1400 W
Sensitivity @ 1W/1m (3) 97.4 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 21 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.31 T Voice Coil Winding Material Copper
Magnet Weight 3300 g Voice Coil Former Material Kapton
Net Weight 11.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.2 Ω Fs 49.5 Hz Surround Material Treated Cloth
Qms 6.54 Qes 0.24 Dust Dome Material Solid Paper
Qts 0.23 Mms 99.7 g Mounting Information
Cms 104 μm/N Bxl 26.20 Tm Overall Diameter 320 mm
Vas 41.5 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 5.5 mm X var (6) +/- 7.6 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 2.08% Le (1KHz) 1.58 mH Total Depth 147.4 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
12 K 3 PL
12” | 700 W Code Z008010
General Specifications
Nominal Diameter 320 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W MADE IN ITALY
12 Fe 3 CP 15
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 97.0 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 17 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.11 T Voice Coil Winding Material Aluminium
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 7.2 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.6 Ω Fs 49.1 Hz Surround Material Treated Cloth
Qms 4.21 Qes 0.39 Dust Dome Material Solid Paper
Qts 0.36 Mms 56.8 g Mounting Information
Cms 185 μm/N Bxl 15.95 Tm Overall Diameter 320 mm
Vas 73.7 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 5.5 mm X var (6) +/- 9.5 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 2.15% Le (1KHz) 0.73 mH Total Depth 139.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
12 N 2,5 PL
12” | 500 W Code Z007971
General Specifications
Nominal Diameter 320 mm / 12 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 97.3 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2,5 in Constructive Characteristics
Voice Coil Winding Depth 12 mm Magnet Neodymium
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.22 T Voice Coil Winding Material Aluminium
Magnet Weight 220 g Voice Coil Former Material Kapton
Net Weight 2.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.6 Ω Fs 55 Hz Surround Material Treated Cloth
Qms 5.20 Qes 0.51 Dust Dome Material Solid Paper
Qts 0.46 Mms 46.1 g Mounting Information
Cms 182 μm/N Bxl 13.24 Tm Overall Diameter 320 mm
Vas 72.8 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 3.5 mm X var (6) +/- 6.5 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 2.27% Le (1KHz) 0.33 mH Total Depth 130.5 mm
16
12 Fe 2,5 CP
12” | 500 W Code Z007861
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 96.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2.5 in Constructive Characteristics
Voice Coil Winding Depth 12 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.19 T Voice Coil Winding Material Aluminium
Magnet Weight 1430 g Voice Coil Former Material Fiberglass
Net Weight 5.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.4 Ω Fs 51.0 Hz Surround Material Treated Cloth
Qms 5.80 Qes 0.53 Dust Dome Material Solid Paper
Qts 0.48 Mms 48.5 g Mounting Information
Cms 174 μm/N Bxl 12.63 Tm Overall Diameter 320 mm
Vas 80.6 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 3.5 mm X var (6) +/- 6.5 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 1.95% Le (1KHz) 0.50 mH Total Depth 136.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
12 L1 2,5 SL
12” | 500 W Code Z007903
General Specifications
Nominal Diameter 318 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W MADE IN ITALY
12 E 2,5 CS 17
General Specifications
Nominal Diameter 318 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 97.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2,5 in Constructive Characteristics
Voice Coil Winding Depth 12 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.15 T Voice Coil Winding Material Copper
Magnet Weight 1450 g Voice Coil Former Material Kapton
Net Weight 4.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.1 Ω Fs 50 Hz Surround Material Treated Cloth
Qms 8.63 Qes 0.36 Dust Dome Material Solid Paper
Qts 0.35 Mms 47.3 g Mounting Information
Cms 214 μm/N Bxl 15.85 Tm Overall Diameter 318 mm
Vas 73.3 I Sd 490.9 cm2 Baffle Cutout Diameter 287 mm
X max (5) +/- 3.0 mm X var (6) +/- 4.5 mm Mounting Holes 8 holes 5x9 on ø 300 mm
η0 2.44% Le (1KHz) 0.96 mH Total Depth 138.3 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
10 K 3 PL
10” | 700 W Code Z005840
General Specifications
Nominal Diameter 268 mm / 10 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 96.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 20 mm Magnet Neodymium
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.20 T Voice Coil Winding Material Aluminium
Magnet Weight 360 g Voice Coil Former Material Kapton
Net Weight 2.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.3 Ω Fs 56 Hz Surround Material Treated Cloth
Qms 5.65 Qes 0.29 Dust Dome Material Solid Paper
Qts 0.28 Mms 42.1 g Mounting Information
Cms 190 μm/N Bxl 16.29 Tm Overall Diameter 268
66 mm
Vas 32.6 I Sd 346.3 cm2 Baffle Cutout Diameter 232
46 mm
X max (5) +/- 6.0 mm X var (6) +/- 8.7 mm Mounting Holes 84 holes 6x9on
ø 3 on ø 300
247 mm
η0 1.86% Le (1KHz) 0.49 mH Total Depth 128
20 mm
18
10 Fe 3 CP
10” | 700 W Code Z005831
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 95.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 17 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.08 T Voice Coil Winding Material Aluminium
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 6.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.7 Ω Fs 53 Hz Surround Material Treated Cloth
Qms 7.78 Qes 0.32 Dust Dome Material Solid Paper
Qts 0.31 Mms 41.1 g Mounting Information
Cms 262 μm/N Bxl 15.56 Tm Overall Diameter 268 mm
Vas 37.4 I Sd 346.4 cm2 Baffle Cutout Diameter 232 mm
X max (5) +/- 4.5 mm X var (6) +/- 7.5 mm Mounting Holes 8 holes 6x9 on ø 247 mm
η0 1.67% Le (1KHz) 0.67 mH Total Depth 122 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
10 N 2,5 PL
10” | 500 W Code Z005701
General Specifications
Nominal Diameter 268 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W MADE IN ITALY
10 Fe 2,5 CP 19
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 96.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2.5 in Constructive Characteristics
Voice Coil Winding Depth 12 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.17 T Voice Coil Winding Material Aluminium
Magnet Weight 1430 g Voice Coil Former Material Fiberglass
Net Weight 4.9 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.5 Ω Fs 61 Hz Surround Material Treated Cloth
Qms 4.85 Qes 0.44 Dust Dome Material Solid Paper
Qts 0.40 Mms 34.2 g Mounting Information
Cms 199 μm/N Bxl 12.80 Tm Overall Diameter 268 mm
Vas 33.9 I Sd 346.4 cm2 Baffle Cutout Diameter 232 mm
X max (5) +/- 3.5 mm X var (6) +/- 6.5 mm Mounting Holes 8 holes 6x9 on ø 247 mm
η0 1.69% Le (1KHz) 0.46 mH Total Depth 119 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
10 Fe 2 CP
10” | 300 W Code Z005781
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 94.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 14 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.15 T Voice Coil Winding Material Copper
Magnet Weight 930 g Voice Coil Former Material Kapton
Net Weight 3.2 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 6.2 Ω Fs 55.7 Hz Surround Material Treated Cloth
Qms 5.37 Qes 0.45 Dust Dome Material Solid Paper
Qts 0.41 Mms 34.7 g Mounting Information
Cms 270 μm/N Bxl 12.51 Tm Overall Diameter 268 mm
Vas 45.9 I Sd 346.4 cm2 Baffle Cutout Diameter 232 mm
X max (5) +/- 4.0 mm X var (6) +/- 7.0 mm Mounting Holes 8 holes 6x9 on ø 247 mm
η0 1.39% Le (1KHz) 0.76 mH Total Depth 114 mm
20
10 E 2 CS
10” | 300 W Code Z006830
General Specifications
Nominal Diameter 266 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 96.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 11 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.10 T Voice Coil Winding Material Copper
Magnet Weight 1100 g Voice Coil Former Material Kapton
Net Weight 3.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.2 Ω Fs 56 Hz Surround Material Treated Cloth
Qms 9.90 Qes 0.36 Dust Dome Material Solid Paper
Qts 0.35 Mms 31.0 g Mounting Information
Cms 258 μm/N Bxl 13.67 Tm Overall Diameter 266 mm
Vas 39.8 I Sd 330.1 cm2 Baffle Cutout Diameter 237 mm
X max (5) +/- 2.0 mm X var (6) +/- 3.5 mm Mounting Holes 8 holes 5x9 on ø 250 mm
η0 1.88% Le (1KHz) 0.90 mH Total Depth 110.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
8 N 2,5 PL
8” | 500 W Code Z005200
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W MADE IN ITALY
8 Fe 2,5 CP 21
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 96.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2,5 in Constructive Characteristics
Voice Coil Winding Depth 13 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.11 T Voice Coil Winding Material Aluminium
Magnet Weight 1430 g Voice Coil Former Material Kapton
Net Weight 4.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.6 Ω Fs 77 Hz Surround Material Treated Cloth
Qms 3.68 Qes 0.32 Dust Dome Material Solid Paper
Qts 0.29 Mms 19.8 g Mounting Information
Cms 216 μm/N Bxl 13.01 Tm Overall Diameter 210 mm
Vas 14.0 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 4.0 mm X var (6) +/- 6.5 mm Mounting Holes 4 holes 5.5x7.5 on ø 196 mm
η0 1.95% Le (1KHz) 0.50 mH Total Depth 98 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
8 Fe 2 CP
8” | 300 W Code Z005112
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 94.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 14 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.20 T Voice Coil Winding Material Copper
Magnet Weight 930 g Voice Coil Former Material Kapton
Net Weight 2.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 6.0 Ω Fs 71 Hz Surround Material Treated Cloth
Qms 1.99 Qes 0.38 Dust Dome Material Solid Paper
Qts 0.32 Mms 21.7 g Mounting Information
Cms 234 μm/N Bxl 12.27 Tm Overall Diameter 210 mm
Vas 15.1 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 5.0 mm X var (6) +/- 8.5 mm Mounting Holes 4 holes 5.5x7.5 on ø 196 mm
η0 1.34% Le (1KHz) 0.78 mH Total Depth 93 mm
22
8 L 2 SL
8” | 300 W Code Z005055
General Specifications
Nominal Diameter 209 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 94.6 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 14 mm Magnet Neodymium
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.20 T Voice Coil Winding Material Copper
Magnet Weight 200 g Voice Coil Former Material Kapton
Net Weight 1.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.1 Ω Fs 67 Hz Surround Material Treated Cloth
Qms 2.69 Qes 0.36 Dust Dome Material Solid Paper
Qts 0.32 Mms 22.1 g Mounting Information
Cms 255 μm/N Bxl 12.49 Tm Overall Diameter 210 mm
Vas 16.6 I Sd 231.8 cm2 Baffle Cutout Diameter 181 mm
X max (5) +/- 3.0 mm X var (6) +/- 4.7 mm Mounting Holes 4 holes ø 4.5 on ø 198.5 mm
η0 1.32% Le (1KHz) 0.85 mH Total Depth 96 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
8 E 2 CS
8” | 260 W Code Z005120
General Specifications
Nominal Diameter 209 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 130 W MADE IN ITALY
8 E2 1,5 CS 23
General Specifications
Nominal Diameter 209 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 93.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1.5 in Constructive Characteristics
Voice Coil Winding Depth 10 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 1.16 T Voice Coil Winding Material Copper
Magnet Weight 640 g Voice Coil Former Material Kapton
Net Weight 2.0 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.5 Ω Fs 70.7 Hz Surround Material Treated Cloth
Qms 2.24 Qes 0.56 Dust Dome Material Solid Paper
Qts 0.45 Mms 18.3 g Mounting Information
Cms 277 μm/N Bxl 9.74 Tm Overall Diameter 210 mm
Vas 17.9 I Sd 213.8 cm2 Baffle Cutout Diameter 181 mm
X max (5) +/- 2.2 mm X var (6) +/- 4.3 mm Mounting Holes 4 holes ø 4.5 on ø 198.5 mm
η0 1.09% Le (1KHz) 0.51 mH Total Depth 90 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
6 N 2,5 PL
6” | 500 W Code Z004080
General Specifications
Nominal Diameter 166 mm / 6 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 250 W
Continuous Program Power (2) 500 W
Sensitivity @ 1W/1m (3) 92.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 65 mm / 2,5 in Constructive Characteristics
Voice Coil Winding Depth 16 mm Magnet Neodymium
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.14 T Voice Coil Winding Material Aluminium
Magnet Weight 220 g Voice Coil Former Material Fiberglass
Net Weight 1.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.2 Ω Fs 83 Hz Surround Material Treated Cloth
Qms 2.45 Qes 0.29 Dust Dome Material Solid Paper
Qts 0.26 Mms 17.1 g Mounting Information
Cms 215 μm/N Bxl 13.88 Tm Overall Diameter 166 mm
Vas 4.6 I Sd 122.7 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 5.0 mm X var (6) +/- 8.0 mm Mounting Holes 4 holes 6x5 on ø 155 mm
η0 0.88% Le (1KHz) 0.62 mH Total Depth 83 mm
24
6 NR 2 PL
6” | 300 W Code Z004068
General Specifications
Nominal Diameter 166 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 91.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 16 mm Magnet Neodymium
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.20 T Voice Coil Winding Material Aluminium
Magnet Weight 200 g Voice Coil Former Material Kapton
Net Weight 1.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 5.5 Ω Fs 68 Hz Surround Material Rubber
Qms 6.09 Qes 0.38 Dust Dome Material Solid Paper
Qts 0.36 Mms 15.9 g Mounting Information
Cms 344 μm/N Bxl 9.86 Tm Overall Diameter 166 mm
Vas 7.4 I Sd 122.7 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 5.2 mm X var (6) +/- 9.5 mm Mounting Holes 4 holes 6x5 on ø 155 mm
η0 0.58% Le (1KHz) 0.58 mH Total Depth 82 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
6 L 1,5 SL
6” | 200 W Code Z004059
General Specifications
Nominal Diameter 164 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W MADE IN ITALY
6 E 1,5 CS 25
General Specifications
Nominal Diameter 164 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 80 W
Continuous Program Power (2) 160 W
Sensitivity @ 1W/1m (3) 91.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 11 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.00 T Voice Coil Winding Material Copper
Magnet Weight 426 g Voice Coil Former Material Aluminium
Net Weight 1.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.0 Ω Fs 63.5 Hz Surround Material Rubber
Qms 2.47 Qes 0.46 Dust Dome Material Paper Ogive
Qts 0.39 Mms 13.1 g Mounting Information
Cms 479 μm/N Bxl 7.50 Tm Overall Diameter 165.8 mm
Vas 10.2 I Sd 122.7 cm2 Baffle Cutout Diameter 142 mm
X max (5) +/- 2.5 mm X var (6) +/- 4.5 mm Mounting Holes 4 holes 7x5 on ø 156 mm
η0 0.55% Le (1KHz) 0.61 mH Total Depth 75 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
5 N 1,5 PL
5” | 200 W Code Z002650
General Specifications
Nominal Diameter 132 mm / 5 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 89.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 12 mm Magnet Neodymium
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 1.14 T Voice Coil Winding Material Aluminium
Magnet Weight 98 g Voice Coil Former Material Kapton
Net Weight 0.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.6 Ω Fs 64 Hz Surround Material Rubber
Qms 4.19 Qes 0.41 Dust Dome Material Treated Cloth
Qts 0.37 Mms 8.2 g Mounting Information
Cms 755 μm/N Bxl 6.68 Tm Overall Diameter 132 mm
Vas 6.6 I Sd 78.5 cm2 Baffle Cutout Diameter 113 mm
X max (5) +/- 3.5 mm X var (6) +/- 6.0 mm Mounting Holes 4 holes ø 5 on ø 139 mm
η0 0.40% Le (1KHz) 0.34 mH Total Depth 73.5 mm
26
5 F 1,5 CP
5” | 160 W Code Z002652
General Specifications
Nominal Diameter 132 mm / 5 in
Nominal Impedance 8Ω
Rated Power AES (1) 80 W
Continuous Program Power (2) 160 W
Sensitivity @ 1W/1m (3) 90.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 15 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 0.98 T Voice Coil Winding Material Aluminium
Magnet Weight 426 g Voice Coil Former Material Kapton
Net Weight 1.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.6 Ω Fs 62 Hz Surround Material Rubber
Qms 5.34 Qes 0.34 Dust Dome Material Treated Cloth
Qts 0.32 Mms 7.7 g Mounting Information
Cms 859 μm/N Bxl 7.12 Tm Overall Diameter 132 mm
Vas 7.5 I Sd 78.5 cm2 Baffle Cutout Diameter 113 mm
X max (5) +/- 3.5 mm X var (6) +/- 6.0 mm Mounting Holes 4 holes ø 5 on ø 139 mm
η0 0.51% Le (1KHz) 0.48 mH Total Depth 65.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
4 L 1 SL
4” | 100 W Code Z001449
General Specifications
Nominal Diameter 102 mm / 4 in
Nominal Impedance 8Ω
Rated Power AES (1) 50 W MADE IN ITALY
4 E 1 CS 27
General Specifications
Nominal Diameter 104 mm / 4 in
Nominal Impedance 8Ω
Rated Power AES (1) 60 W
Continuous Program Power (2) 120 W
Sensitivity @ 1W/1m (3) 90.0 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 25 mm / 1 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 1.10 T Voice Coil Winding Material Aluminium
Magnet Weight 380 g Voice Coil Former Material Aluminium
Net Weight 1.0 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.6 Ω Fs 125 Hz Surround Material Treated Cloth
Qms 1.74 Qes 0.52 Dust Dome Material Polypropylene Ogive
Qts 0.40 Mms 3.9 g Mounting Information
Cms 414 μm/N Bxl 5.76 Tm Overall Dimensions 104x104 mm
Vas 1.1 I Sd 44.2 cm2 Baffle Cutout Diameter 90 mm
X max (5) +/- 2.2 mm X var (6) +/- 3.5 mm Mounting Holes 4 holes ø 5.0 on ø 106 mm
η0 0.42% Le (1KHz) 0.14 mH Total Depth 56.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
3,5 L 1 SL
3,5” | 60 W Code Z000963
General Specifications
Nominal Diameter 88 mm / 3,5 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 30 W
Continuous Program Power (2) 60 W
Sensitivity @ 1W/1m (3) 88.3 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 25 mm / 1 in Constructive Characteristics
Voice Coil Winding Depth 6 mm Magnet Neodymium
Magnetic Gap Depth 4 mm Basket Material Nylon Fiberglass Doped
Flux Density 1.20 T Voice Coil Winding Material Copper
Magnet Weight 42 g Voice Coil Former Material Kapton
Net Weight 0.2 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.1 Ω Fs 112.4 Hz Surround Material Rubber
Qms 7.67 Qes 0.66 Dust Dome Material Treated Cloth
Qts 0.61 Mms 3.3 g Mounting Information
Cms 606 μm/N Bxl 4.25 Tm Overall Diameter 88 mm
Vas 1.3 I Sd 38.5 cm2 Baffle Cutout Diameter 81 mm
X max (5)
+/- 1.5 mm X var (6) +/- 3.0 mm Mounting Holes 4 holes ø 4 on ø 98 mm
η0 0.26% Le (1KHz) 0.12 mH Total Depth 43.5 mm
28
3,5 F 1 CS
3,5” | 60 W Code Z000960
General Specifications
Nominal Diameter 88 mm / 3,5 in
Nominal Impedance 8Ω
Rated Power AES (1) 30 W
Continuous Program Power (2) 60 W
Sensitivity @ 1W/1m (3) 88.3 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 25 mm / 1 in Constructive Characteristics
Voice Coil Winding Depth 6 mm Magnet Ferrite
Magnetic Gap Depth 4 mm Basket Material Nylon Fiberglass Doped
Flux Density 1.04 T Voice Coil Winding Material Copper
Magnet Weight 160 g Voice Coil Former Material Kapton
Net Weight 0.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.1 Ω Fs 111.2 Hz Surround Material Rubber
Qms 5.07 Qes 0.67 Dust Dome Material Treated Cloth
Qts 0.59 Mms 3.3 g Mounting Information
Cms 621 μm/N Bxl 4.19 Tm Overall Diameter 88 mm
Vas 1.3 I Sd 38.5 cm2 Baffle Cutout Diameter 81 mm
X max (5) +/- 1.5 mm X var (6) +/- 3.1 mm Mounting Holes 4 holes 4 on ø 98 mm
η0 0.26% Le (1KHz) 0.21 mH Total Depth 45 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
3 L 0,8 SL
3” | 30 W Code Z000900
General Specifications
Nominal Diameter 80 mm / 3 in
Nominal Impedance 8Ω
Rated Power AES (1) 15 W MADE IN ITALY
2,5 H 0,8 SL 29
General Specifications
Nominal Diameter 66x66 mm / 2.5 in
Nominal Impedance 8Ω
Rated Power AES (1) 15 W
Continuous Program Power (2) 30 W
Sensitivity @ 1W/1m (3) 85.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 20 mm / 0,8 in Constructive Characteristics
Voice Coil Winding Depth 5 mm Magnet Neodymium
Magnetic Gap Depth 3 mm Basket Material Pressed Sheet Steel
Flux Density 1.30 T Voice Coil Winding Material Copper
Magnet Weight 16 g Voice Coil Former Material Kapton
Net Weight 0.13 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.0 Ω Fs 198.6 Hz Surround Material Treated Cloth
Qms 6.31 Qes 1.23 Dust Dome Material Solid Paper
Qts 1.03 Mms 1.5 g Mounting Information
Cms 422 μm/N Bxl 2.76 Tm Overall Dimensions 66x66 mm
Vas 0.2 I Sd 18.9 cm2 Baffle Cutout Diameter 61 mm
X max (5) +/- 1.3 mm X var (6) +/- 2.6 mm Mounting Holes 4 holes 6x4.5 on ø 75.5 mm
η0 0.13% Le (1KHz) 0.12 mH Total Depth 34 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
10 K 3 PL
10” | 700 W Code Z005840
C
MADE IN ITALY
30
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 Hz
Sensitivity @ 1W/1m (3) 95.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 17 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.08 T Voice Coil Winding Material Aluminium
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 6.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.7 Ω Fs 53 Hz Surround Material Treated Cloth
Coaxial
Qms 7.78 Qes 0.32 Dust Dome Material Solid Paper
Qts 0.31 Mms 41.1 g Mounting Information
Cms 262 μm/N Bxl 15.56 Tm Overall Diameter 462 mm
Vas 37.4 I Sd 346.4 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 4.5 mm X var (6) +/- 7.5 mm Mounting Holes 4 holes 6.5x9 on ø 441 mm
η0 1.67% Le (1KHz) 0.67 mH Total Depth 203.5 mm
Professional
Coaxial
12 C 3 CP
12” | 700 W Code Z007996
31
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Coaxial
12 C 2,5 CP
12” | 500 W Code Z007857
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
MADE IN ITALY Rated Power AES (1) 250 W Constructive Characteristics
Continuous Program Power (2) 500 W Magnet Ferrite
Sensitivity @ 1W/1m (3) 98.6 dB Basket Material Aluminium Die-Cast
Voice Coil Diameter 65 mm / 2.5 in Voice Coil Winding Material Copper
Voice Coil Winding Depth 16 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 8 mm Cone Material Paper
Flux Density 1.30 T Cone Treatment No
Magnet Weight 1450 g Surround Material Treated Cloth
Net Weight 5.0 kg Dust Dome Material Non Treated Cloth
Thiele & Small Parameters (4) Mounting Information
Re 6.3 Ω Fs 55.1 Hz Overall Diameter 320 mm
Qms 8.98 Qes 0.33 Baffle Cutout Diameter 284 mm
Qts 0.31 Mms 47.0 g Mounting Holes 8 holes 6x9 on ø 301 mm
Cms 178 μm/N Bxl 17.80 Tm Total Depth 132.4 mm
Vas 70.9 I Sd 530.9 cm2 Throath Diameter for Compression Driver 25,4 mm
X max (5) +/- 4.0 mm X var (6) +/- 7.0 mm
4 holes M4 on ø 95 mm
η0 3.49% Le (1KHz) 1.12 mH Compression Driver Mounting Holes 4 holes M5 on ø 129 mm
32
Compression drivers CD 120.44 / 640 (pag 67) and CD 90.38/405 (pag 68)
can be used with coaxial woofer 12 C 2,5 CP thanks to the adaptor Q07310A.
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
Coaxial
12 C 2 CP
12” | 300 W Code Z007852
General Specifications
Nominal Diameter 320 mm / 12 in
Nominal Impedance 8Ω Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Rated Power AES (1) 150 W MADE IN ITALY
33
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Coaxial
10 C 2 CP
10” | 300 W Code Z006781
General Specifications
Nominal Diameter 268 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
MADE IN ITALY
34
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Professional
Coaxial
8 C 2 CP
8” | 300 W Code Z005061
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
MADE IN ITALY
35
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
36
S
Studio Monitor
37
Studio Monitor
8 H 2 CP
8” | 300 W Code Z005158
MADE IN ITALY
38
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 88.6 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 18 mm Magnet Ferrite
Magnetic Gap Depth 5 mm Basket Material Aluminium Die-Cast
Flux Density 0.89 T Voice Coil Winding Material Copper
Magnet Weight 930 g Voice Coil Former Material Kapton
Net Weight 2.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Damping Treatment
Re 6.1 Ω Fs 38.8 Hz Surround Material Rubber
Qms 4.52 Qes 0.56 Dust Dome Material Solid Paper
Qts 0.50 Mms 32.8 g Mounting Information
Cms 514 μm/N Bxl 9.33 Tm Overall Diameter 210 mm
Vas 33.2 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 6.5 mm X var (6) +/- 9.4 mm Mounting Holes 4 holes 5.5x7.5 on ø 196 mm
η0 0.33% Le (1KHz) 0.59 mH Total Depth 93 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Studio Monitor
6,5 H 1,5 CP
6,5” | 200 W Code Z004100
General Specifications
Nominal Diameter 174 mm / 6,5 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W MADE IN ITALY
6 H 1,5 CP 39
General Specifications
Nominal Diameter 166 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 88.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 15 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 0.98 T Voice Coil Winding Material Copper
Magnet Weight 515 g Voice Coil Former Material Kapton
Net Weight 1.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Damping Treatment
Re 6.1 Ω Fs 47.5 Hz Surround Material Rubber
Qms 3.49 Qes 0.46 Dust Dome Material Solid Paper
Qts 0.40 Mms 16.3 g Mounting Information
Cms 703 μm/N Bxl 8.05 Tm Overall Diameter 166 mm
Vas 15.0 I Sd 122.7 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 4.7 mm X var (6) +/- 7.6 mm Mounting Holes 4 holes 6x5 on ø 155 mm
η0 0.33% Le (1KHz) 0.95 mH Total Depth 79 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Studio Monitor
5,5 H 1,5 CP
5,5” | 200 W Code Z002800
General Specifications
Nominal Diameter 150 mm / 5,5 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 86.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m – Free Air Impedance
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 15 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 0.98 T Voice Coil Winding Material Copper
Magnet Weight 515 g Voice Coil Former Material Kapton
Net Weight 1.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Damping Treatment
Re 6.1 Ω Fs 50.0 Hz Surround Material Rubber
Qms 3.62 Qes 0.39 Dust Dome Material Rubber
Qts 0.36 Mms 12.0 g Mounting Information
Cms 843 μm/N Bxl 7.68 Tm Overall Diameter 151 mm
Vas 7.4 I Sd 78.5 cm2 Baffle Cutout Diameter 113 mm
X max (5) +/- 4.6 mm X var (6) +/- 6.8 mm Mounting Holes 4 holes ø 5 on ø 139 mm
η0 0.23% Le (1KHz) 0.53 mH Total Depth 71.5 mm
40
5 H 1,5 CP
5” | 200 W Code Z002655
General Specifications
Nominal Diameter 132 mm / 5 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 87.2 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 15 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 0.98 T Voice Coil Winding Material Copper
Magnet Weight 515 g Voice Coil Former Material Kapton
Net Weight 1.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Damping Treatment
Re 6.1 Ω Fs 51.8 Hz Surround Material Rubber
Qms 3.83 Qes 0.38 Dust Dome Material Solid Paper
Qts 0.34 Mms 12.2 g Mounting Information
Cms 773 μm/N Bxl 8.02 Tm Overall Diameter 132 mm
Vas 6.7 I Sd 78.5 cm2 Baffle Cutout Diameter 113 mm
X max (5) +/- 4.0 mm X var (6) +/- 6.6 mm Mounting Holes 4 holes ø 5 on ø 139 mm
η0 0.24% Le (1KHz) 0.80 mH Total Depth 71.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Studio Monitor
3,5 H 1 CS
3,5” | 60 W Code Z000957
General Specifications
Nominal Diameter 88 mm / 3,5 in
Nominal Impedance 8Ω
Rated Power AES (1) 30 W MADE IN ITALY
2,5 H 0,8 SL 41
General Specifications
Nominal Diameter 66x66 mm / 2,5 in
Nominal Impedance 8Ω
Rated Power AES (1) 15 W
Continuous Program Power (2) 30 W
Sensitivity @ 1W/1m (3) 85.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 20 mm / 0,8 in Constructive Characteristics
Voice Coil Winding Depth 5 mm Magnet Neodymium
Magnetic Gap Depth 3 mm Basket Material Pressed Sheet Steel
Flux Density 1.30 T Voice Coil Winding Material Copper
Magnet Weight 16 g Voice Coil Former Material Kapton
Net Weight 0.13 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Damping Treatment
Re 5.0 Ω Fs 198.6 Hz Surround Material Treated Cloth
Qms 6.31 Qes 1.23 Dust Dome Material Solid Paper
Qts 1.03 cm2 Mms 1.5 g Mounting Information
Cms 422 μm/N Bxl 2.76 Tm Overall Dimensions 66x66 mm
Vas 0.2 I Sd 18.9 cm2 Baffle Cutout Diameter 61 mm
X max (5) +/- 1.3 mm X var (6) +/- 2.6 mm Mounting Holes 4 holes 6x4.5 on ø 75.5 mm
η0 0.13% Le (1KHz) 0.12 mH Total Depth 34 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Studio Monitor
LP 90.28 / N92 TW
1,1” | 120 W Code Z009160
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 90 mm
Nominal Impedance 8Ω
Rated Power AES (2000-20000 Hz) (1) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Neodymium
Rated Noise Power (IEC 60268-5) (3) 120 W Voice Coil Winding Material Aluminium Flat Wire
Sensitivity @ 1W/1m (4) 94.4 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 28 mm / 1,1 in Diaphragm Treated Silk
Voice Coil Winding Depth 2.7 mm Ferrofluid in Air Gap No
Magnetic Gap Depth 3 mm Flange Aluminium
Flux Density 1.80 T Spare Part Code Z009405
DC Resistance 6.0 Ω Mounting Information
Resonance Frequency 600 Hz Overall Diameter 90 mm
Magnet Weight 92 g Baffle Cutout Diameter 67 mm
Net Weight 0.41 kg Mounting Holes 4 holes ø 4.5 on ø 80 mm
Recommended Crossover Frequency 2.0 kHz Total Depth 39 mm
42
(1) Rated Power measured with 2 hours test with pink noise signal,6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Studio Monitor
LP 110.28 / 380 TW
1,1” | 120 W Code Z009240
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 110 mm
Nominal Impedance 8Ω
Rated Power AES (2000-20000 Hz) (1) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 120W Voice Coil Winding Material Aluminium Flat Wire
Sensitivity @ 1W/1m (3) 93.3 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 28 mm / 1,1 in Diaphragm Treated Silk
Voice Coil Winding Depth 2.7 mm Ferrofluid in Air Gap No
Magnetic Gap Depth 3 mm Flange Aluminium
Flux Density 12.8 T Spare Part Code Z009410
DC Resistance 6.0 Ω Mounting Information
Resonance Frequency 650 Hz Overall Diameter 110 mm
Magnet Weight 380 g Baffle Cutout Diameter 85 mm
Net Weight 0.80 kg Mounting Holes 4 holes ø 4.8 on ø 98 mm
Recommended Crossover Frequency 2.0kHz Total Depth 49.5 mm
43
(1) Rated Power measured with 2 hours test with pink noise signal,6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Studio Monitor
LP 98.25/245 TW
1” | 120 W Code Z009170
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 98 mm
Nominal Impedance 8Ω
Rated Power AES (3000-20000) (1) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 120W Voice Coil Winding Material Copper
Sensitivity @ 1W/1m (3) 93.1 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 25 mm / 1 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2 mm Flange Aluminium
Flux Density 1.70 T Spare Part Code Z009407
DC Resistance 6.0 Ω Mounting Information
Resonance Frequency 1.2 kHz Overall Dimensions 98 mm
Magnet Weight 245 g Baffle Cutout Diameter 80 mm
Net Weight 0.60 kg Mounting Holes 4 holes ø 4.5 on ø 87.5 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 32.4 mm
44
(1) Rated Power measured with 2 hours test with pink noise signal,6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Studio Monitor
LP 38x50.18/N5 TW
0,7” | 50 W Code Z008701
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Dimensions 38x50 mm
Nominal Impedance 8Ω
Rated Power AES (4500-20000) (1) 12 W Constructive Characteristics
Continuous Program Power (2) 24 W Magnet Neodymium
Rated Noise Power (IEC 60268-5) (3) 50W Voice Coil Winding Material Copper
Sensitivity @ 1W/1m (3) 91.1 dB Voice Coil Former Material Epotex
Voice Coil Diameter 18 mm / 0,7 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2 mm Flange Nylon Fiberglass Doped
Flux Density 1.10 T Spare Part Code -
DC Resistance 5.8 Ω Mounting Information
Resonance Frequency 2.2 kHz Overall Dimensions 38 x 50 mm
Magnet Weight 5g Baffle Cutout Diameter 31 mm
Net Weight 0.03 kg Mounting Holes 4 holes ø 3.8 on ø 46 mm
Recommended Crossover Frequency 4.5 kHz Total Depth 14.5 mm
45
(1) Rated Power measured with 2 hours test with pink noise signal,6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
46
S
Subwoofer
47
Subwoofer
21 S 4 PL
21” | 2000 W Code Z008425
General Specifications
Nominal Diameter 545 mm / 21 in
Nominal Impedance 4Ω
MADE IN ITALY Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 97.0 dB Frequency Response on 190 Litres Vented Box @ 1W, 0.5m, normalized to SPL 1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 25 mm Magnet Neodymium
Magnetic Gap Depth 17 mm Basket Material Aluminium Die-Cast
Flux Density 0.94 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Fiberglass
Net Weight 10.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 3.5 Ω Fs 38.7 Hz Surround Material Treated Cloth
Qms 4.19 Qes 0.48 Dust Dome Material Solid Paper
Qts 0.43 Mms 288.2 g Mounting Information
Cms 59 μm/N Bxl 22.56 Tm Overall Diameter 545 mm
Vas 229.8 I Sd 1661.9 cm2 Baffle Cutout Diameter 497 mm
X max (5) +/- 6.5 mm X var (6) +/- 11.5 mm Mounting Holes 8 holes 13x9 on ø 520 mm
η0 2.65% Le (1KHz) 1.60 mH Total Depth 245 mm
48
18 S 4 PL
18” | 2000 W Code Z008405
General Specifications
Nominal Diameter 462 mm / 18 in
Nominal Impedance 8Ω
Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 97.3 dB Frequency Response on 150 Litres Vented Box @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 27 mm Magnet Neodymium
Magnetic Gap Depth 12 mm Basket Material Aluminium Die-Cast
Flux Density 1.21 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Fiberglass
Net Weight 8.3 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 36.2 Hz Surround Material Treated Cloth
Qms 6.56 Qes 0.42 Dust Dome Material Solid Paper
Qts 0.39 Mms 197.0 g Mounting Information
Cms 98 μm/N Bxl 23.54 Tm Overall Diameter 462 mm
Vas 189.0 I Sd 1164.2 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 7.5 mm X var (6) +/- 10.1 mm Mounting Holes 8 holes 6,5x9 on ø 441 mm
η0 2.07% Le (1KHz) 1.35 mH Total Depth 211 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Subwoofer
15 S 4 PL
15” | 2000 W Code Z008175
General Specifications
Nominal Diameter 388 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 1000 W MADE IN ITALY
15 S 3 CP 49
General Specifications
Nominal Diameter 389 mm / 15 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 96.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 24 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.04 T Voice Coil Winding Material Copper
Magnet Weight 1800 g Voice Coil Former Material Fiberglass
Net Weight 8.1 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.2 Ω Fs 38.5 Hz Surround Material Treated Cloth
Qms 10.61 Qes 0.47 Dust Dome Material Solid Paper
Qts 0.45 Mms 108.9 g Mounting Information
Cms 157 μm/N Bxl 17.07 Tm Overall Diameter 389 mm
Vas 163.0 I Sd 855.3 cm2 Baffle Cutout Diameter 355 mm
X max (5) +/- 7.3 mm X var (6) +/- 10.8 mm Mounting Holes 8 holes 6x9 on ø 371 mm
η0 1.91% Le (1KHz) 1.58 mH Total Depth 163 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Subwoofer
12 S 4 PL
12” | 2000 W Code Z007951
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 1000 W
Continuous Program Power (2) 2000 W
Sensitivity @ 1W/1m (3) 95.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 27 mm Magnet Neodymium
Magnetic Gap Depth 12 mm Basket Material Aluminium Die-Cast
Flux Density 1.21 T Voice Coil Winding Material Copper
Magnet Weight 536 g Voice Coil Former Material Fiberglass
Net Weight 6.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 43.5 Hz Surround Material Treated Cloth
Qms 5.30 Qes 0.28 Dust Dome Material Solid Paper
Qts 0.27 Mms 109.6 g Mounting Information
Cms 122 μm/N Bxl 23.50 Tm Overall Diameter 320 mm
Vas 48.9 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 7.5 mm X var (6) +/- 8.5 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 1.39% Le (1KHz) 1.15 mH Total Depth 153.5 mm
50
12 S 4 CP
12” | 1400 W Code Z007953
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 700 W
Continuous Program Power (2) 1400 W
Sensitivity @ 1W/1m (3) 95.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 100 mm / 4 in Constructive Characteristics
Voice Coil Winding Depth 27 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.08 T Voice Coil Winding Material Copper
Magnet Weight 3300 g Voice Coil Former Material Fiberglass
Net Weight 11.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.2 Ω Fs 39 Hz Surround Material Treated Cloth
Qms 7.27 Qes 0.27 Dust Dome Material Solid Paper
Qts 0.26 Mms 102.4 g Mounting Information
Cms 163 μm/N Bxl 22.18 Tm Overall Diameter 320 mm
Vas 65.1 I Sd 530.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 8.5 mm X var (6) +/- 10.0 mm Mounting Holes 8 holes 6x9 on ø 301 mm
η0 1.39% Le (1KHz) 1.73 mH Total Depth 147.4 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Subwoofer
12 SR 3 PL
12” | 700 W Code Z007948
General Specifications
Nominal Diameter 320 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W MADE IN ITALY
12 SR 3 CP 51
General Specifications
Nominal Diameter 321 mm / 12 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 92.4 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 20 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.00 T Voice Coil Winding Material Copper
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 7.3 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.1 Ω Fs 37.8 Hz Surround Material Rubber
Qms 3.20 Qes 0.46 Dust Dome Material Solid Paper
Qts 0.40 Mms 100.1 g Mounting Information
Cms 177 μm/N Bxl 16.39 Tm Overall Diameter 320 mm
Vas 60.5 I Sd 490.9 cm2 Baffle Cutout Diameter 284 mm
X max (5) +/- 5.0 mm X var (6) +/- 8.8 mm Mounting Holes 8 holes ø 6 on ø 300 mm
η0 0.67% Le (1KHz) 1.14 mH Total Depth 139.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Subwoofer
10 S 3 PL
10” | 700 W Code Z006015
General Specifications
Nominal Diameter 268 mm / 10 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 94.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 24 mm Magnet Neodymium
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.19 T Voice Coil Winding Material Copper
Magnet Weight 360 g Voice Coil Former Material Fiberglass
Net Weight 3.1 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 51 Hz Surround Material Treated Cloth
Qms 3.58 Qes 0.31 Dust Dome Material Solid Paper
Qts 0.29 Mms 58.5 g Mounting Information
Cms 167 μm/N Bxl 17.34 Tm Overall Diameter 268 mm
Vas 28.4 I Sd 346.4 cm2 Baffle Cutout Diameter 232 mm
X max (5) +/- 7.0 mm X var (6) +/- 9.0 mm Mounting Holes 8 holes 6x9 on ø 247 mm
η0 1.14% Le (1KHz) 1.18 mH Total Depth 120 mm
52
10 S 3 CP
10” | 700 W Code Z006017
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 W
Sensitivity @ 1W/1m (3) 94.0 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 24 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Flux Density 1.00 T Voice Coil Winding Material Copper
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 6.5 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 5.1 Ω Fs 48 Hz Surround Material Treated Cloth
Qms 4.14 Qes 0.35 Dust Dome Material Solid Paper
Qts 0.33 Mms 58.4 g Mounting Information
Cms 191 μm/N Bxl 15.84 Tm Overall Diameter 268 mm
Vas 32.4 I Sd 346.4 cm2 Baffle Cutout Diameter 232 mm
X max (5) +/- 7.0 mm X var (6) +/- 8.5 mm Mounting Holes 8 holes 6x9 on ø 247 mm
η0 0.95% Le (1KHz) 1.19 mH Total Depth 122 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Subwoofer
10 SR 2,5 CP
10” | 500 W Code Z006013
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 250 W MADE IN ITALY
8 SR 2 CP 53
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 91.5 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 18 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 0.97 T Voice Coil Winding Material Copper
Magnet Weight 1100 g Voice Coil Former Material Kapton
Net Weight 3.2 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 6.2 Ω Fs 55 Hz Surround Material Rubber
Qms 5.05 Qes 0.43 Dust Dome Material Solid Paper
Qts 0.40 Mms 29.7 g Mounting Information
Cms 284 μm/N Bxl 12.13 Tm Overall Diameter 210 mm
Vas 18.4 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 5.0 mm X var (6) +/- 8.0 mm Mounting Holes 4 holes 5.5x7.5 on ø 196 mm
η0 0.67% Le (1KHz) 1.23 mH Total Depth 90 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
54
M
Midrange
55
Midrange
8 M 1,5 CS
8” | 200 W Code Z004930
General Specifications
Nominal Diameter 208 mm / 8 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 98.7 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 8 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 1.15 T Voice Coil Winding Material Copper
Magnet Weight 640 g Voice Coil Former Material Epotex
Net Weight 2.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.0 Ω Fs 460 Hz Surround Material Paper - Integrated
Qms 12.36 Qes 2.13 Dust Dome Material Paper Ogive
Qts 1.82 Mms 11.6 g Mounting Information
Cms 10 μm/N Bxl 9.83 Tm Overall Diameter 208 mm
Vas 0.7 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 1.0 mm X var (6) +/- 1.0 mm Mounting Holes 4 holes 8x5 on ø 197 mm
η0 2.91% Le (1KHz) 0.37 mH Total Depth 82 mm
56
6 M 2 CP
6” | 300 W Code Z004079
General Specifications
Nominal Diameter 166 mm / 6 in
Nominal Impedance 4Ω
Rated Power AES (1) 150 W
Continuous Program Power (2) 300 W
Sensitivity @ 1W/1m (3) 95.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 50 mm / 2 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Aluminium Die-Cast
Flux Density 1.14 T Voice Coil Winding Material Aluminium
Magnet Weight 810 g Voice Coil Former Material Kapton
Net Weight 2.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 3.2 Ω Fs 205.7 Hz Surround Material Treated Cloth
Qms 3.27 Qes 0.64 Dust Dome Material Solid Paper
Qts 0.54 Mms 11.6 g Mounting Information
Cms 52 μm/N Bxl 8.59 Tm Overall Diameter 166 mm
Vas 1.4 I Sd 138.9 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 2.0 mm X var (6) +/- 3.4 mm Mounting Holes 4 holes 6x5 on ø 155 mm
η0 1.84% Le (1KHz) 0.38 mH Total Depth 78 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
Midrange
6 M 1,5 CS
6” | 160 W Code Z004040
General Specifications
Nominal Diameter 165 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 80 W MADE IN ITALY
5 M 1,5 PL 57
General Specifications
Nominal Diameter 132 mm / 5 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 93.6 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 7 mm Magnet Neodymium
Magnetic Gap Depth 6 mm Basket Material Aluminium Die-Cast
Flux Density 1.20 T Voice Coil Winding Material Aluminium
Magnet Weight 121 g Voice Coil Former Material Kapton
Net Weight 0.8 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Humidity Resistant Pulp
Re 6.0 Ω Fs 151.9 Hz Surround Material Treated Cloth
Qms 4.23 Qes 0.59 Dust Dome Material Treated Cloth
Qts 0.52 Mms 6.1 g Mounting Information
Cms 179 μm/N Bxl 7.69 Tm Overall Diameter 132 mm
Vas 1.8 I Sd 84.9 cm2 Baffle Cutout Diameter 113 mm
X max (5) +/- 1.8 mm X var (6) +/- 2.4 mm Mounting Holes 4 holes ø 5 on ø 139 mm
η0 1.04% Le (1KHz) 0.10 mH Total Depth 73.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
58
D
Dual Cone
59
Dual Cone
12 D 1,5 CS
12” | 200 W Code Z007360
General Specifications
Nominal Diameter 318 mm / 12 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 96.3 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.21 T Voice Coil Winding Material Copper
Magnet Weight 1100 g Voice Coil Former Material Epotex
Net Weight 3.7 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 5.3 Ω Fs 67 Hz Surround Material Paper - Integrated
Qms 18.23 Qes 0.90 Dust Dome Material Non Treated Cloth
Qts 0.86 Mms 36.4 g Mounting Information
Cms 153 μm/N Bxl 9.51 Tm Overall Diameter 318 mm
Vas 52.2 I Sd 490.9 cm2 Baffle Cutout Diameter 287 mm
X max (5) +/- 2.7 mm X var (6) +/- 5.0 mm Mounting Holes 8 holes 5x9 on ø 300 mm
η0 1.71% Le (1KHz) 0.35 mH Total Depth 136.3 mm
60
10 D 1,5 CS
10” | 160 W Code Z006510
General Specifications
Nominal Diameter 266 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 80 W
Continuous Program Power (2) 160 W
Sensitivity @ 1W/1m (3) 93.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 0.95 T Voice Coil Winding Material Copper
Magnet Weight 426 g Voice Coil Former Material Epotex
Net Weight 1.9 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 5.0 Ω Fs 71 Hz Surround Material Paper - Integrated
Qms 12.27 Qes 1.28 Dust Dome Material Non Treated Cloth
Qts 1.16 Mms 22.6 g Mounting Information
Cms 222 μm/N Bxl 6.26 Tm Overall Diameter 266 mm
Vas 34.5 I Sd 330.1 cm2 Baffle Cutout Diameter 237 mm
X max (5) +/- 2.2 mm X var (6) +/- 4.5 mm Mounting Holes 8 holes 5x9 on ø 250 mm
η0 0.92% Le (1KHz) 0.26 mH Total Depth 101.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (8) The notch around 400Hz on the frequency response is typical of the measurement on IEC baffle.
Dual Cone
8 D 1,5 PL
8” | 200 W Code Z004450
General Specifications
Nominal Diameter 210 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W MADE IN ITALY
8 D 1,5 CS 61
General Specifications
Nominal Diameter 208 mm / 8 in
Nominal Impedance 8Ω
Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 94.9 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 10 mm Magnet Ferrite
Magnetic Gap Depth 8 mm Basket Material Pressed Sheet Steel
Flux Density 1.10 T Voice Coil Winding Material Copper
Magnet Weight 1100 g Voice Coil Former Material Kapton
Net Weight 3.1 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 6.7 Ω Fs 65 Hz Surround Material Treated Cloth
Qms 1.73 Qes 0.38 Dust Dome Material Treated Cloth
Qts 0.31 Mms 17.4 g Mounting Information
Cms 346 μm/N Bxl 11.18 Tm Overall Diameter 208 mm
Vas 22.4 I Sd 213.8 cm2 Baffle Cutout Diameter 184 mm
X max (5) +/- 2.2 mm X var (6) +/- 3.7 mm Mounting Holes 4 holes 5x8 on ø 197 mm
η0 1.55% Le (1KHz) 0.35 mH Total Depth 90 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (8) The notch around 400Hz on the frequency response is typical of the measurement on IEC baffle.
Dual Cone
6 D 1,5 SL
6” | 200 W Code Z004065
General Specifications
Nominal Diameter 165 mm / 6 in
Nominal Impedance 8Ω
MADE IN ITALY Rated Power AES (1) 100 W
Continuous Program Power (2) 200 W
Sensitivity @ 1W/1m (3) 93.4 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Neodymium
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 1.20 T Voice Coil Winding Material Copper
Magnet Weight 126 g Voice Coil Former Material Aluminium
Net Weight 0.9 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 5.3 Ω Fs 99 Hz Surround Material Treated Cloth
Qms 1.84 Qes 0.52 Dust Dome Material Treated Cloth
Qts 0.41 Mms 11.2 g Mounting Information
Cms 230 μm/N Bxl 8.39 Tm Overall Diameter 165.8 mm
Vas 4.9 I Sd 122.7 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 2.5 mm X var (6) +/- 4.0 mm Mounting Holes 4 holes 7x5 on ø 155 mm
η0 0.87% Le (1KHz) 0.22 mH Total Depth 76 mm
62
6 D 1,5 CS
6” | 160 W Code Z004002
General Specifications
Nominal Diameter 165 mm / 6 in
Nominal Impedance 8Ω
Rated Power AES (1) 80 W
Continuous Program Power (2) 160 W
Sensitivity @ 1W/1m (3) 91.4 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 38 mm / 1,5 in Constructive Characteristics
Voice Coil Winding Depth 9 mm Magnet Ferrite
Magnetic Gap Depth 6 mm Basket Material Pressed Sheet Steel
Flux Density 0.95 T Voice Coil Winding Material Copper
Magnet Weight 426 g Voice Coil Former Material Aluminium
Net Weight 1.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 5.2 Ω Fs 78.8 Hz Surround Material Treated Cloth
Qms 1.43 Qes 0.59 Dust Dome Material Treated Cloth
Qts 0.42 Mms 12.7 g Mounting Information
Cms 323 μm/N Bxl 7.46 Tm Overall Diameter 165.8 mm
Vas 6.9 I Sd 122.7 cm2 Baffle Cutout Diameter 143 mm
X max (5) +/- 2.0 mm X var (6) +/- 3.5 mm Mounting Holes 4 holes 7x5 on ø 155 mm
η0 0.49% Le (1KHz) 0.25 mH Total Depth 70 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (8) The notch around 400Hz on the frequency response is typical of the measurement on IEC baffle.
Dual Cone
5 D 1 CS
5” | 120 W Code Z002400
General Specifications
Nominal Diameter 129 mm / 5 in
Nominal Impedance 8Ω
Rated Power AES (1) 60 W MADE IN ITALY
4 D 0,8 CS 63
4” | 60 W Code Z001300
General Specifications
Nominal Diameter 102 mm / 4 in
Nominal Impedance 4Ω
Rated Power AES (1) 30 W
Continuous Program Power (2) 60 W
Sensitivity @ 1W/1m (3) 87.1 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 20 mm / 0.8 in Constructive Characteristics
Voice Coil Winding Depth 5 mm Magnet Ferrite
Magnetic Gap Depth 4 mm Basket Material Pressed Sheet Steel
Flux Density 1.10 T Voice Coil Winding Material Copper
Magnet Weight 154 g Voice Coil Former Material Epotex
Net Weight 0.4 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment No
Re 3.0 Ω Fs 145.0 Hz Surround Material Treated Cloth
Qms 4.82 Qes 1.25 Dust Dome Material Solid Paper
Qts 0.99 Mms 3.3 g Mounting Information
Cms 361 μm/N Bxl 2.73 Tm Overall Diameter 100 mm
Vas 1.0 I Sd 44.2 cm2 Baffle Cutout Diameter 90 mm
X max (5) +/- 1.3 mm X var (6) +/- 3.0 mm Mounting Holes 4 holes ø 5 on ø 116 mm
η0 0.23% Le (1KHz) 0.14 mH Total Depth 50 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. (8) The notch around 400Hz on the frequency response is typical of the measurement on IEC baffle.
Compression Driver
10 K 3 PL
10” | 700 W Code Z005840
C
MADE IN ITALY
64
General Specifications
Nominal Diameter 269 mm / 10 in
Nominal Impedance 8Ω
Rated Power AES (1) 350 W
Continuous Program Power (2) 700 Hz
Sensitivity @ 1W/1m (3) 95.8 dB Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Voice Coil Diameter 75 mm / 3 in Constructive Characteristics
Voice Coil Winding Depth 17 mm Magnet Ferrite
Magnetic Gap Depth 10 mm Basket Material Aluminium Die-Cast
Compression
Flux Density 1.08 T Voice Coil Winding Material Aluminium
Magnet Weight 1790 g Voice Coil Former Material Fiberglass
Net Weight 6.6 kg Cone Material Paper
Thiele & Small Parameters (4) Cone Treatment Surface Waterproof Treatment
Re 5.7 Ω Fs 53 Hz Surround Material Treated Cloth
Qms 7.78 Qes 0.32 Dust Dome Material Solid Paper
Driver
Qts 0.31 Mms 41.1 g Mounting Information
Cms 262 μm/N Bxl 15.56 Tm Overall Diameter 462 mm
Vas 37.4 I Sd 346.4 cm2 Baffle Cutout Diameter 417 mm
X max (5) +/- 4.5 mm X var (6) +/- 7.5 mm Mounting Holes 4 holes 6.5x9 on ø 441 mm
η0 1.67% Le (1KHz) 0.67 mH Total Depth 203.5 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Calcu-
lated by Thiele & Small parameters. (4) Thiele & Small parameters measured with laser system without preconditioning test. (5) Measured with respect to a THD of 10% using a parameter-based method. (6) Value
corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value.
MADE IN ITALY
65
Compression Driver
CD 105.65/N220
2,5” | 160 W Code Z009497
MADE IN ITALY
66
General Specifications
Nominal Diameter 105 mm Free Air Frequency Response with 6x8.5 inches horn @ 1W,1m – Impedance (without horn).
Nominal Impedance 8Ω
Rated Power AES (1) (1200 - 20000 Hz) 80 W
Continuous Program Power (2) 160 W
Sensitivity @ 1W/1m (3) 108.8 dB Constructive Characteristics
Voice Coil Diameter 65 mm / 2,5 in Magnet Neodymium
Voice Coil Winding Depth 3.0 mm Voice Coil Winding Material Aluminium Flat Wire
Magnetic Gap Depth 3.0 mm Voice Coil Former Material Kapton
Flux Density 1.93 T Diaphragm Titanium
DC Resistance 6.00 Ω Ferrofluid in Air Gap No
Resonance Frequency 650 Hz Spare Part Code Z009399
Magnet Weight 220 g Mounting Information
Net Weight 1.3 kg Overall Diameter 105 mm
Recommended Crossover Frequency 1.2 kHz Mounting Holes 4 holes ø 6.5 on ø 102 mm
Throat Diameter 35.5 mm / 1,4 in Total Depth 90 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power.
(3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn.
Compression Driver
CD 95.44/N240
1,7” | 120 W Code Z009493
MADE IN ITALY
General Specifications
Nominal Diameter 96 mm Free Air Frequency Response with 6x11 inches horn @ 1W,1m. Impedance (without horn).
Nominal Impedance 8Ω
Rated Power AES (1) (1500 - 20000 Hz) 60 W
Continuous Program Power (2) 120 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 106.3 dB Magnet Neodymium
Voice Coil Diameter 44 mm / 1,7 in Voice Coil Winding Material Aluminium Flat Wire
Voice Coil Winding Depth 2.6 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 3.0 mm Diaphragm Titanium
Flux Density 2.10 T Ferrofluid in Air Gap No
DC Resistance 5.80 Ω Spare Part Code Z009396
Resonance Frequency 0.8 kHz Mounting Information
Magnet Weight 235 g Overall Diameter 96 mm
Net Weight 1.1 kg 4 holes ø 4.5 on ø 95 mm
Mounting Holes
Recommended Crossover Frequency 1.6 kHz 2 holes M6 on ø 76 mm
Throat Diameter 25.4mm / 1 in Total Depth 47 mm
CD 120.44/640 67
General Specifications
Nominal Diameter 120 mm Free Air Frequency Response with 6x11 inches horn @ 1W,1m. Impedance (without horn).
Nominal Impedance 8Ω
Rated Power AES (1) (1500 - 20000 Hz) 60 W
Continuous Program Power (2) 120 W
Sensitivity @ 1W/1m (3) 106.3 dB Constructive Characteristics
Voice Coil Diameter 44 mm / 1,7 in Magnet Ferrite
Voice Coil Winding Depth 2.6 mm Voice Coil Winding Material Aluminium Flat Wire
Magnetic Gap Depth 3.0 mm Voice Coil Former Material Kapton
Flux Density 1.70 T Diaphragm Titanium
DC Resistance 5.80 Ω Ferrofluid in Air Gap No
Resonance Frequency 1.10 kHz Spare Part Code Z009396
Magnet Weight 640 g Mounting Information
Net Weight 1.9 kg Overall Diameter 121 mm
Recommended Crossover Frequency 1.6 kHz Mounting Holes 2 holes M6 on ø 76 mm
Throat Diameter 25.4 mm / 1 in Total Depth 52 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power.
(3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn.
Compression Driver
CD 60.38/N92
1,5” | 60 W Code Z009484
MADE IN ITALY
General Specifications Free Air Frequency Response with 6x11 inches horn @ 1W,1m. Impedance (without horn).
Nominal Diameter 60 mm
Nominal Impedance 8Ω
Rated Power AES (1) (1800 - 20000 Hz) 30 W
Continuous Program Power (2) 60 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 107.9 dB Magnet Neodymium
Voice Coil Diameter 38 mm / 1,5 in Voice Coil Winding Material Aluminium Flat Wire
Voice Coil Winding Depth 2.5 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 2.5 mm Diaphragm PEI
Flux Density 1.85 T Ferrofluid in Air Gap No
DC Resistance 6.0 Ω Spare Part Code Z009390
Resonance Frequency 1.1 kHz Mounting Information
Magnet Weight 92 g Overall Diameter 60 mm
Net Weight 0.4 kg 2 holes ø 5.5 on ø 95 mm
Mounting Holes
Recommended Crossover Frequency 2.0 kHz 2 holes ø 5.5 on ø 76 mm
Throat Diameter 25.4mm / 1 in Total Depth 46 mm
68
CD 90.38/405
1,5” | 60 W Code Z009487
General Specifications
Free Air Frequency Response with 6x11 inches horn @ 1W,1m – Impedance (without horn).
Nominal Diameter 90 mm
Nominal Impedance 8Ω
Rated Power AES (1) (1800 - 20000 Hz) 30 W
Continuous Program Power (2) 60 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 105.7 dB Magnet Ferrite
Voice Coil Diameter 38 mm / 1 in Voice Coil Winding Material Aluminium Flat Wire
Voice Coil Winding Depth 2.5 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 2.5 mm Diaphragm PEI
Flux Density 1.64 T Ferrofluid in Air Gap No
DC Resistance 6.00 Ω Spare Part Code Z009392
Resonance Frequency 1.0 kHz Mounting Information
Magnet Weight 405 g Overall Diameter 90 mm
Net Weight 0.93 kg Baffle Cutout Diameter 417 mm
Recommended Crossover Frequency 2.0 kHz Mounting Holes 2 holes M5 on ø 76 mm
Throat Diameter 25.4 mm / 1 in Total Depth 50 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power.
(3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn.
Compression Driver
CD 83.26/380
1” | 40 W Code Z009470
MADE IN ITALY
General Specifications Free Air Frequency Response with 6x11 inches horn @ 1W,1m. Impedance (without horn).
Nominal Diameter 83 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2000 - 20000 Hz) 20 W
Continuous Program Power (2) 40 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 107.3 dB Magnet Ferrite
Voice Coil Diameter 25 mm / 1 in Voice Coil Winding Material Aluminium Flat Wire
Voice Coil Winding Depth 2.1 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 2.0 mm Diaphragm Tri-acetate Film
Flux Density 1.70 T Ferrofluid in Air Gap No
DC Resistance 5.50 Ω Spare Part Code Z009370
Resonance Frequency 1.5 kHz Mounting Information
Magnet Weight 380 g Overall Dimensions 86x95 mm
Net Weight 0.8 kg 4 holes ø 4.5 on ø 95 mm
Mounting Holes
Recommended Crossover Frequency 2.5 kHz 2 holes M5 on ø 76 mm
Throat Diameter 25.4 mm / 1 in Total Depth 51 mm
CD 78.26/245 69
1” | 32 W Code Z009442
General Specifications
Free Air Frequency Response with 6x8 inches horn @ 1W,1m. Impedance (without horn).
Nominal Diameter 78 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2000 - 20000 Hz) 16 W
Continuous Program Power (2) 32 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 105.5 dB Magnet Ferrite
Voice Coil Diameter 25 mm / 1 in Voice Coil Winding Material Copper
Voice Coil Winding Depth 1.7 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 2.0 mm Diaphragm Tri-acetate Film
Flux Density 1.56 T Ferrofluid in Air Gap No
DC Resistance 6.30 Ω Spare Part Code Z009374
Resonance Frequency 1.5 kHz Mounting Information
Magnet Weight 245 g Overall Dimensions 78x88.5 mm
Net Weight 0.6 kg 2 holes ø 4.5 on ø 95 mm
Mounting Holes
Recommended Crossover Frequency 2.5 kHz 2 holes M5 on ø 76 mm
Throat Diameter 25.4 mm / 1 in Total Depth 51 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power.
(3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn.
Compression Driver
CD 78.26/N92
1” | 40 W Code Z009450
MADE IN ITALY
70
General Specifications Free Air Frequency Response with 6x8 inches horn @ 1W,1m. Impedance (without horn).
Nominal Diameter 78 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2000 - 20000 Hz) 20 W
Continuous Program Power (2) 40 W Constructive Characteristics
Sensitivity @ 1W/1m (3) 107.3 dB Magnet Neodymium
Voice Coil Diameter 25 mm / 1 in Voice Coil Winding Material Aluminium Flat Wire
Voice Coil Winding Depth 2.1 mm Voice Coil Former Material Kapton
Magnetic Gap Depth 2.0 mm Diaphragm Tri-acetate Film
Flux Density 1.92 T Ferrofluid in Air Gap No
DC Resistance 5.30 Ω Spare Part Code Z009376
Resonance Frequency 1.5 kHz Mounting Information
Magnet Weight 92 g Overall Dimensions 78x88.5 mm
Net Weight 0.4 kg 4 holes ø 4.5 on ø 95 mm
Mounting Holes
Recommended Crossover Frequency 2.5 kHz 2 holes M5 on ø 76 mm
Throat Diameter 25.4 mm / 1 in Total Depth 44 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power.
(3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn.
Horn
Q07015A
1” Horn
MADE IN ITALY
General Specifications
Throat Diameter 25.4 mm / 1 in
Cutoff Frequency 1.00 kHz Mounting Information
Net Weight 0.41 Kg Shape Rectangular
Horizontal coverage 80° Overall Dimensions 290x160x150 mm
Vertical coverage 60° Baffle Cutout Dimensions 255x135 mm
Material Plastic Mounting Holes 8 holes ø 4.5 mm
71
Compression Driver
Q07020A
1” Horn
MADE IN ITALY
General Specifications
Throat Diameter 25.4 mm / 1 in
Cutoff Frequency 1.50 kHz Mounting Information
Net Weight 0.30 Kg Shape Elliptic
Horizontal coverage 90° Overall Dimensions 200x160x100 mm
Vertical coverage 60° Baffle Cutout Dimensions 167x129 mm
Material Plastic Mounting Holes 4 holes ø 5.0 mm
72
0
-3
-6
-9
-1 2
-1 5
-1 8
-2 1
-2 4
-2 7
-3 0
Horn
Q07030A Q07032B
1” Horn 1” Horn
General Specifications
Throat Diameter 25.4 mm / 1 in
Cutoff Frequency 2.00 kHz
Net Weight 0.10 Kg
Horizontal coverage 80°
Vertical coverage 80°
Material Plastic
Mounting Information Q07030A Q07032B
Shape Round Round (square contour)
Overall Dimensions ø 140x80 mm 119x119x80 mm
Baffle Cutout Dimensions ø 109 mm ø 109 mm
Mounting Holes 4 holes ø 5.0 mm 4 holes ø 5.0 mm
MADE IN ITALY
Q07050A 73
1” Wave Guide
General Specifications
Throat Diameter 25.4 mm / 1 in
Cutoff Frequency 1.50 Hz
Net Weight 0.10 Kg
Horizontal coverage 130°
Material Plastic
Mounting Information
Overall Dimensions 110x87x112 mm
Baffle Cutout Dimensions 108x62 mm
Mounting Holes 4 holes ø 4.8 mm
Q07050A - Q07050A -
0 0
-3 -3
-6 -6
-9 -9
-1 2 -1 2
-1 5 -1 5
-1 8 -1 8
-2 1 -2 1
-2 4 -2 4
-2 7 -2 7
-3 0 -3 0
74
D
Dome Tweeter
75
Dome Tweeter
LP 90.28 / N92 TW
1,1” |120 W Code Z009160
MADE IN ITALY
76
General Specifications
Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 90 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2000 - 20000 Hz) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Neodymium
Rated Noise Power (IEC 60268-5) (3) 120 W Voice Coil Winding Material Aluminium Flat Wire
Sensitivity @ 1W/1m (4) 94.4 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 28 mm / 1,1 in Diaphragm Treated Silk
Voice Coil Winding Depth 2.7 mm Ferrofluid in Air Gap No
Magnetic Gap Depth 3.0 mm Flange Aluminium
Flux Density 1.80 T Spare Part Code Z009405
DC Resistance 6.00 Ω Mounting Information
Resonance Frequency 600 Hz Overall Diameter 90 mm
Magnet Weight 92 g Baffle Cutout Diameter 67 mm
Net Weight 0.41 kg Mounting Holes 4 holes ø 4.5 on ø 80 mm
Recommended Crossover Frequency 2.0 kHz Total Depth 39 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Dome Tweeter
LP 110.28 / 380 TW
1,1” | 120 W Code Z009240
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 110 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2000 - 20000 Hz) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 120 W Voice Coil Winding Material Aluminium Flat Wire
Sensitivity @ 1W/1m (3) 93.3 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 28 mm / 1,1 in Diaphragm Treated Silk
Voice Coil Winding Depth 2.7 mm Ferrofluid in Air Gap No
Magnetic Gap Depth 3 mm Flange Aluminium
Flux Density 1.28 T Spare Part Code Z009410
DC Resistance 6.0 Ω Mounting Information
Resonance Frequency 650 Hz Overall Diameter 110 mm
Magnet Weight 380 g Baffle Cutout Diameter 85 mm
Net Weight 0.80 kg Mounting Holes 4 holes ø 4.8 on ø 98 mm
Recommended Crossover Frequency 2.0 kHz Total Depth 49.5 mm
LP 53x58.28 / N20 TW 77
General Specifications
Free Air Frequency Response @ 1W,1m. Free Air Impedance.
Nominal Dimensions 53x58 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2500 - 20000 Hz) 20 W Constructive Characteristics
Continuous Program Power (2) 40 W Magnet Neodymium
Rated Noise Power (IEC 60268-5) (3) 80 W Voice Coil Winding Material Aluminium Flat Wire
Sensitivity @ 1W/1m (4) 95.8 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 28 mm / 1,1 in Diaphragm Treated Silk
Voice Coil Winding Depth 2.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2 mm Flange Nylon Fiberglass Doped
Flux Density 1.37 T Spare Part Code -
DC Resistance 6.00 Ω Mounting Information
Resonance Frequency 1.5 kHz Overall Dimensions 53x58 mm
Magnet Weight 20 g Baffle Cutout Diameter 49 mm
Net Weight 0.08 kg Mounting Holes 4 holes ø 3.8 on ø 62 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 24 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Dome Tweeter
LP 111.25 / 245 TW
1” | 120 W Code Z009215
MADE IN ITALY
General Specifications Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 110 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2500 - 20000 Hz) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 120 W Voice Coil Winding Material Copper
Sensitivity @ 1W/1m (4) 95.1 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 25 mm / 1 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2.0 mm Flange ABS
Flux Density 1.70 T Spare Part Code Z009402
DC Resistance 6.00 Ω Mounting Information
Resonance Frequency 1.2 kHz Overall Diameter 110 mm
Magnet Weight 245 g Baffle Cutout Diameter 84 mm
Net Weight 0.60 kg Mounting Holes 4 holes ø 4.5 on ø 98 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 32.9 mm
78
LP 98.25 / 245 TW
1” | 120 W Code Z009170
General Specifications
Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 98 mm
Nominal Impedance 8Ω
Rated Power AES (1) (2500 - 20000 Hz) 25 W Constructive Characteristics
Continuous Program Power (2) 50 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 120 W Voice Coil Winding Material Copper
Sensitivity @ 1W/1m (4) 93.1 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 25 mm / 1 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2.0 mm Flange Aluminium
Flux Density 1.70 T Spare Part Code Z009407
DC Resistance 6.00 Ω Mounting Information
Resonance Frequency 1.2 kHz Overall Diameter 98 mm
Magnet Weight 245 g Baffle Cutout Diameter 80 mm
Net Weight 0.60 kg Mounting Holes 4 holes ø 4.5 on ø 87.5 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 32.4 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
Dome Tweeter
LP 66.25 / N14 TW
1” | 70 W Code Z008950
MADE IN ITALY
General Specifications Free Air Frequency Response @ 1W,1m. Free Air Impedance.
Nominal Diameter 66 mm
Nominal Impedance 8Ω
Rated Power AES (1) (3000 - 20000 Hz) 17 W Constructive Characteristics
Continuous Program Power (2) 34 W Magnet Neodymium
Rated Noise Power (IEC 60268-5) (3) 70 W Voice Coil Winding Material Copper Round Wire
Sensitivity @ 1W/1m (4) 90.7 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 25 mm / 1 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.7 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 2.0 mm Flange Nylon Fiberglass Doped
Flux Density 1.20 T Spare Part Code -
DC Resistance 6.00 Ω Mounting Information
Resonance Frequency 1.3 kHz Overall Diameter 66 mm
Magnet Weight 14 g Baffle Cutout Diameter 46 mm
Net Weight 0.09 kg Mounting Holes 4 holes ø 3 on ø 56 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 20 mm
LP 85.25 / 95 TW 79
1” | 80 W Code Z009040
General Specifications
Frequency Response on IEC Baffle (DIN 45575) @ 1W,1m. Free Air Impedance.
Nominal Diameter 85 mm
Nominal Impedance 8Ω
Rated Power AES (1) (3000 - 20000 Hz) 20 W Constructive Characteristics
Continuous Program Power (2) 40 W Magnet Ferrite
Rated Noise Power (IEC 60268-5) (3) 80 W Voice Coil Winding Material Copper
Sensitivity @ 1W/1m (4) 89.8 dB Voice Coil Former Material Aluminium
Voice Coil Diameter 25 mm / 1 in Diaphragm Treated Silk
Voice Coil Winding Depth 1.8 mm Ferrofluid in Air Gap Yes
Magnetic Gap Depth 3 mm Flange ABS
Flux Density 1.06 T Spare Part Code -
DC Resistance 6.30 Ω Mounting Information
Resonance Frequency 1.1 kHz Overall Diameter 85 mm
Magnet Weight 95 g Baffle Cutout Diameter 62 mm
Net Weight 0.26 kg Mounting Holes 4 holes ø 4 on ø 75 mm
Recommended Crossover Frequency 2.5 kHz Total Depth 21 mm
(1) Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor. (2) Power on Continuous Program is defined as 3 dB greater than the Rated Power. (3) Rated Noise Power measured with 100 hours
test pink noise, 6dB crest factor IFC60268-5 filtering. (4) Measured at 1W,1m in axis within the frequency range.
© Sica Altoparlanti s.r.l. 2015 - All rights reserved.
The data contained in this catalog is subject to change;
Sica Altoparlanti s.rl. reserves the right to make changes
to its products without notice. There may be unintended
inaccuracies or typographical errors in this catalog; please
confirm any data of specific importance prior to purchasing.
Any reproduction whatsoever, even partial, is expressly
forbidden.