Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DX 36 Page 194
DX 460-F8 Page 195
DX 460 MX Page 196
Consumables X-U, X-C, X-FS, X-CC U, X-M, X-EM Page 197-200
DX 460 IE Page 201
Insulation Fasteners X-IE Page 202
DX 426-CM / DX462-HM Page 203
DX 460 GR Page 204
Accessories Page 205-206
Grating Fasteners X-FCM, X-FCP, X-GR RU, X-GR, X-MGR Page 206-208
DX 351 BT G / DX 351 BT Page 209
Threaded Stud X-BT Page 210
Accessories Page 211
7
DX 76 PTR Page 212
X-ENP System Page 213
Shear Connectors X-HVB Page 214
Accessories Page 215-216
* Special items: Made to order. Allow longer delivery time. Kindly check with your Hilti representative.
Concrete
Sand lime block
Hollow brick
Concrete
Steel
Masonary
Steel
Tool Applications Base Material
Tool Applications Base Material
Powder-actuated tools
Gas-actuated tools
DX 462-CM / HM
GX 120 nn E
nergy & Industry :
nn Interior finishing :
DX 462
Fastening of metal track, hat track and wood Hot and cold marking on steel.
for partition wall. nn Steel & Metal : Hot and cold marking on steel.
Metal profile fastening to walls for
suspended ceilings.
nn Construction : Fastening mesh for render and plaster.
GX 120
DX 76 PTR
GX 120-ME
nn S
teel & Metal : Fastening of profiled metal sheets to steel
nn Mechanical : Fastening conduit, metal and plastic pipes.
Fastening of long span decks and
nn Electrical : Fastening electrical boxes, cables, pipes liner trays for sheet steel roofing and
and plastic electrical trunking. cladding
DX 76
DX 76-HVB
Powder-actuated tools
DX 351-MX nn Steel & Metal : hear connector fastening for composite
S
floor construction
nn Mechanical & Electrical :
Fastening punched metal band for
cable fixing.
Fastening plastic electrical trunking.
DX 351-BT nn Energy & Industry :
DX 351
X-BT
astening on coated or painted steel to
F
Fastening punched metal band for avoid corrosion & through penetration.
cable fixing
Grating fixing.
astening threaded studs for variety
F
of applications Electrical & instrumentation fixing.
astening electrical boxes, cables,
F
pipes and plastic electrical trunking
DX 460-MX
DX 460 F8
nn Construction : Fastening mesh for render and plaster
Temporary fastenings (barriers,…)
Formwork and shuttering
DX 460
DX 460 X-IE
nn Construction :
nn Steel & Metal : Fastening composite thermal insulation
systems
DX 460-GR
nn Energy & Industry :
Fastening of grating and checker plate
nn Steel & Metal : Fastening of grating and checker plate
185 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 186
Direct Fastening Systems Direct Fastening Systems
DX 351 unit.
DX 351 MX
esignation With magazined
D With single Dimension Application
GX 120 / GX 120-ME nails nails
GX 120-ME
Designation Photo Dimension Application
GX 120
Fastening suspended ceiling on
X-HS - Internal thread: M6, M8 & M10
concrete and on steel
Fastening of metal track, hat track
X-GHP 20 mm for partition wall
Construction
DX 460 X-IE
Metal profile fastening to walls for
DX 460
suspended ceilings esignation With magazined
D With single Dimension Application
nails nails
DX 76 PTR
DX 76 HVB
DX 460 GR
DX 351 BT
D
Steel & Metal
esignation With magazined With single Dimension Application
7
ø 8-11-16-20-22
X-FB nails nails
25-28-32-40 Fastening conduit, metal &
plastic pipes
X-DFB ø 16-20-22-25-28
X-ENP 19 mm Fastening profile metal sheet
Fastening conduit, metal &
X-EMTSC ø 16-20-25
plastic pipes
X-ENP
X-EKS ø 16-20-25-32-40 21 mm
HVB Fastening shear connector for
concrete-steel composite construction
X-EKSC ø 16-20-25 Fastening conduit & pipe HVB - 50 140 mm
Thread diameter: M8
X-ECT X-CRM8 -
Thread length: 12 & 15 mm
Recommended Suitable
187 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 188
Direct Fastening Systems Direct Fastening Systems
DX 351 unit.
DX 351 MX
esignation With magazined
D
nails
With single
nails
Dimension Application GX 120
Step on the gas. Speed up your business.
Single nails: 16 27 mm Fastening on steel, concrete
X-U
Magazine nails: 16 27 mm & concrete block
X-EMTSC - Diameter 16, 20 & 25 mm Fastening conduit and pipe Fields of Application Technical data
nn Versatile fastening tool for the drywall installation trade GX 120
X-EKS - Diameter 16, 20, 25, 32 & 40 mm nn Fastening to concrete, plastered masonry, sand-lime block, con- Max. fastener driving rate 1200 per hour
crete block and steel
Fastening plastic pipe Power source type GC 21 (gas can for 750 fasten-
nn Fast and reliable fixing of wire mesh to concrete and block
X-EKSC - Diameter 16, 20 & 25 mm ings)
Power 100 J
Features and Benefits
With pre-mounted nail: Fastener length range 14 mm - 39 mm
nn Ruggedly built, perfectly balanced, lightweight and reliable, high-
8 or 16 tankage cables (Ø 6mm)
X-EKB performance fastening Fastener Intake 40 nails
Without premounted nail:
4, 8 or 16 tankage cables (Ø 6mm) nn Gas-driven system - for complete independence from electric Weight 3.8 kg
supplies and no need to ever charge batteries
Dimensions (LxWxH) 431 x 134 x 392 mm
Fastening electric cables nn Slim, streamlined design for easy access even in tight corners
and narrow tracks
X-ECH - For 10, 20 or 30 tankage cables nn More efficient due to gas capacity of 750 fastenings and 40-nail
magazine
nn Easily adjustable tool nose with one lever for optimum fastening
quality
X-ET -
Fastening electrical box
& trunking
nn No surprise interruptions. LED Gauge shows how much gas is 7
left
Fastening suspended
X-CC - Nail length: 16, 22 & 27 mm
components (i.e lights,…)
Internal thread: 6, 8 & 10 mm
X-HS - Fastening suspended elements
Nail length: 19, 27 & 32mm
X-M
Thread diameter: M6, M8
studs for -
concrete Thread length: 8 to 20 mm
Fastening various elements on
X-EM steel & concrete
Thread diameter: M6, M8
studs for -
Thread length: 8 to 20 mm
steel
Ordering
Order designation Package content Item Number
Gas-actuated tool GX 120 Supplied in an impact-resistant plastic toolbox with attachable support leg, tool 00274638
support, nail punch set, ear protectors, safety glasses , cleaning cloth and operat-
ing instruction manual
189 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 190
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Package quantity Item Number
Features and Benefits Power 100 J Gas nail X-EGN 14 MX 14 mm Steel 750 pcs 00340231
nn Ruggedly built, perfectly balanced, lightweight and reliable, high- Fastener length range 14 mm - 39 mm Gas nail X-GHP 20 MX 20 mm Concrete (hard) 750 pcs 00285724
performance fastening tool Fastener Intake 20 nails (+2) Gas nail X-GN 27 MX 27 mm Brick (solid), Concrete, Masonry 750 pcs 00340230
nn Gas-driven system - for complete independence from electric Weight 3.8 kg Gas nail X-GN 32 MX 32 mm Concrete, Masonry, Brick (solid) 750 pcs 00340233
supplies and no need to ever charge batteries
Dimensions (LxWxH) 431 x 134 x 392 mm Gas nail X-GN 39 MX 39 mm Concrete, Masonry, Brick (solid) 750 pcs 00340234
nn First ever gas gauge - no surprise due to empty gas can
nn Slim, streamlined design for optimum accessibility
nn Trouble-free starting, even at high temperatures Washer for Wire Mesh Fixing
DX
Ordering
Ordering
Order designation Special Item Diameter Package quantity Item Number
191 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 192
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Package quantity Item Number
Accessories
Fields of Application Technical Data
nn Fastening formstop FS for formwork installation
DX 36
nn Wood to concrete e.g. kicker board fastening
GX 120 ME
Power source type Powder-actuated
GX 120
Features and Benefits Power 299 J
nn Power regulator provides variable power choices for accurate Fastener length range 12 mm - 62 mm
Order designation Item nail driving Fastener Intake Single
Number
nn Durable construction for proven dependability Weight 2 kg
Washer holder XG 120 WH n n 00039619
Dimensions (LxWxH) 370 x 52.2 x 152 mm
Case GX 120 Typ 39 n n 00274005 Cartridge type 6.8/11
Cartridge color/level Green, Yellow, Red, Black
Ordering
Order designation Package content Item Number
Powder-actuated tool DX 36 Supplied in plastic case, cleaning set, ear protector, safety goggles, Hilti lubricant 00384032
spray and operating instructions.
193 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 194
Direct Fastening Systems Direct Fastening Systems
Ordering
Ordering Order designation Package content Item Number
Order designation Package content Item Number Powder-actuated tool DX 460 MX 72 Supplied in an impact resistant toolbox, cleaning set, ear protector, safety gog- 00371671
gles, Hilti lubricant spray and operating instructions.
Powder-actuated tool DX 460 F8 Supplied in an impact resistant toolbox, cleaning set, ear protector, safety gog- 00305175
gles, Hilti lubricant spray and operating instructions. Powder-actuated tool DX 460 MX 72 Powder-actuated tool DX 460 MX 72 (African markets). 00371668
195 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 196
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Base materials Shank length Shank diameter Package quantity Item Number
Features and Benefits Fields of Application Universal nail X-U 37 MX Concrete, Steel 37 mm 4 mm 100 pcs 00237349
nn Fastening wood to concrete (even high-strength concrete) or steel Universal nail X-U 42 MX Concrete, Steel 42 mm 4 mm 100 pcs 00237350
nn Driving depth indicator on the nail shank for easy selection of
optimum nail length nn Setting up forming boards and safety barriers Universal nail X-U 47 MX Concrete, Steel 47 mm 4 mm 100 pcs 00237351
nn Thanks to the reliable hold achieved at reduced depth of pen- nn Fastening wall ties Universal nail X-U 52 MX Concrete, Steel 52 mm 4 mm 100 pcs 00237352
etration, shorter nails and less powerful cartridges can be used nn Installing suspended components, e.g. ceiling frames or pipes, on Universal nail X-U 62 MX Concrete, Steel 62 mm 4 mm 100 pcs 00237354
- resulting in lower recoil, lower costs and easier use hard concrete or steel
Universal nail X-U 72 MX Concrete, Steel 72 mm 4 mm 100 pcs 00237356
nn Ballistic point for optimum driving characteristics nn Fastening installation channels on roof beams and ceilings
nn Magazine for rapid fastening, greater convenience and increased nn Securing flexible conduits, rigid conduits and cables to ceilings,
efficiency walls and floors
Ordering
Order designation Special Item Base materials Shank length Shank diameter Package quantity Item Number
197 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 198
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Cartridge color/level Cartridge intake Package quantity Item Number
Order designation Base materials Shank length Shank diameter Package quantity Item Number
DX cartridge 6,8/11 M green Green Collated 100 pcs 00050351
Concrete nail X-C 27 MX Concrete 27 mm 3.5 mm 1000 pcs 00388510 DX cartridge 6,8/11 M yellow Yellow Collated 100 pc 00050352
Concrete nail X-C 32 MX Concrete 32 mm 3.5 mm 1000 pcs 00388511 DX cartridge 6,8/11 M red Red Collated 100 pcs 00050353
Concrete nail X-C 37 MX Concrete 37 mm 3.5 mm 1000 pcs 00388512 DX cartridge 6,8/11 M black Black Collated 100 pcs 00050354
Concrete nail X-C 42 MX Concrete 42 mm 3.5 mm 1000 pcs 00388513 DX cartridge 6,8/11 M BULK white White Collated 1000 pc 00333317
Concrete nail X-C 47 MX Concrete 47 mm 3.5 mm 1000 pcs 00388514 DX cartridge 6,8/11 M BULK yellow Yellow Collated 1000 pcs 00050372
Concrete nail X-C 52 MX Concrete 52 mm 3.5 mm 1000 pcs 00388515 DX cartridge 6,8/11 M BULK red Red Collated 1000 pcs 00050373
Formwork Nail
X-CT DP8 Ordering
Order designation Special Item Shank diameter Shank length Washer size Package quantity Item Number
Temporary fastening with marked pre-determined breaking point.
Form stop X-FS MX * 50 mm 100 pcs 00408022
Form stop X-FS C52 3.5 mm 52 mm 50 mm 100 pcs 00407346
Ordering
Order designation Special Item Shank length Shank diameter Package quantity Item Number
Ordering
Order designation Special Item Shank length Base materials Package quantity Item Number
General Purpose Nail for Applications on Concrete Ceiling clip X-CC U16 P8 16 mm Steel 100 pcs 00386228
X-C P8S Ceiling clip X-CC U22 P8 * 22 mm Concrete (pre-cast) 100 pcs 00386229
Ceiling clip X-CC U27 P8 27 mm Concrete, Concrete over 100 pcs 00386230
metal deck
Ordering
Order designation Base materials Shank length Shank diameter Package quantity Item Number
Ordering
Universal nail X-CR 16 P8 Concrete, Steel 16 mm 3.7 mm 100 pcs 00247356
Order designation Thread diameter Thread length Shank length Package quantity Item Number
Universal nail X-CR 29 P8 Concrete, Steel 29 mm 3.7 mm 100 pcs 00247360
Threaded stud X-EM10H-24-12P10 M10 24 mm 12 mm 100 pcs 00271984
199 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 200
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Special Item Washer size Thickness Insulation Package quantity Item Number
Material
Ordering
Order designation Package content Item Number
Powder-actuated tool DX 460 IE Supplied in an impact resistant toolbox, cleaning set, ear protector, safety gog- 00377790
gles, Hilti lubricant spray and operating instructions.
201 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 202
Direct Fastening Systems Direct Fastening Systems
Powder Actuated Tool for Hot or Cold Marking Grating Fastening Tool
DX 462-CM/ DX 462-HM DX 460-GR
Portable tool for hot marking. Portable tool for cold marking. Up to 120 grating fastenings per hour by one user.
Ordering
Order designation Package content Item Number
Powder-actuated tool DX 462 CM Supplied in an impact resistant toolbox, cleaning set, ear protector, safety gog- 00284710
gles, Hilti lubricant spray and operating instructions. Ordering
Powder-actuated tool DX 462 HM Supplied in an impact resistant toolbox, cleaning set, spare parts pack HM1, ear 00284711 Order designation Package content Item Number
protector, safety goggles, Hilti lubricant spray and operating instructions.
Powder-actuated tool DX 460 GR Supplied in an impact-resistant plastic toolbox with cleaning kit, ear protectors, 00304394
Powder-actuated tool DX 462 HM Powder-actuated tool DX 462 HM (Central Asian Markets). 00376376 safety goggles, Hilti spray lubricant and operating instructions.
203 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 204
Direct Fastening Systems Direct Fastening Systems
Accessories Accessories
DX 460 GR
DX 460 MX
DX 460 GR
DX 460 IE
DX 460 IE
DX 460
DX 460
DX 36
DX 36
Order designation Item Order designation Item
Number Number
Fastener guide X-FG8ME351 n 00362174 Piston X-460 PIE-L n 00377813
Nail magazine X-MX 27 assy n 00333315
Marking head X-462-HM n 00267999
Marking Characters
Fastener guide X-460-F8 n n 00304529
HMC
205 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 206
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Thickness fas- Thickness fastened Material composition Package quantity Item Number
tened - min - max
Grating disc X-FCM-R 1 1/4 32 mm 38 mm Stainless steel 100 pc 00247184 Grating disc X-GR RU 25/30 CR20 P8 25mm - 30mm 0.8 kN 100 pc 00384239
Grating disc X-GR RU 35/40 CR20 P8 35mm - 40mm 0.8 kN 100 pc 00384240 7
Grating disc X-GR RU 1 1/4” CR20 P8 27mm - 32mm 0.8 kN 100 pc 00385932
Grating disc X-MGR M60 25mm - 40mm 0.6 kN Hot dipped galva- 20 pc 00384233
nized
Grating stud with 8 mm washer
X-CR M8 Grating disc X-MGR W60 25mm - 40mm 0.6 kN Hot dipped galva- 20 pc 00384234
nized
Ordering
Order designation Thread diameter Thread length Shank length Package quantity Item Number
207 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 208
Direct Fastening Systems Direct Fastening Systems
Ordering
Material: Stainless steel
Order designation Special Item Thread diameter Thread length Package quantity Item Number
Ordering
Ordering Order designation Cartridge color/level Cartridge intake Package quantity Item Number
Order designation Package content Item Number DX cartridge 6,8/11 M brown Brown Collated 100 pcs 00377204
Powder-actuated tool DX 351 BT G Supplied in an impact resistant toolbox, cleaning set, ear protector, safety gog- 00377624
gles, Hilti lubricant spray and operating instructions.
Powder-actuated tool DX 351 BT 00377615
209 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 210
Direct Fastening Systems Direct Fastening Systems
Cordless Drill
DX 351 BT G
DX 361 BT
Order designation Item
Number
Centering disc X-BT CD 18/24 00378885
n
Check gauge X-BT PRG 8/15 n 00377088 Fields of Application Technical data
nn Fastening system with construction supervisory authority ap- DX 76-PTR
Check gauge X-BT PRG 10/24 n 00377089 proval, for highly-stressed joints, fastening profile metal sheets,
liner trays and steel composite systems on steel supports with a Max. fastener driving rate 600 per hour
thickness of 3 mm or more. Power source type Powder-actuated
Fastener guide X-351 BT FG W1024 n 00378673
Power 520 J
Fastener guide X-351 BT FG M1024 n 00378674 Features and Benefits Fastener types X-ENP-19 L15 MX, X-ENP2K-20
nn Innovative PTR (punch through resistance) system plus the well- L15 MX
proven piston principle ensure maximum safety for users and
Fastener guide X-351 BT FG G n 00378675 Fastener Intake 10 nails
bystanders
nn High fastening quality even on thin substructures Weight 4.4 kg
Piston X-351 BT P 1024 n 00378676 Dimensions (LxWxH) 464 x 104 x 352 mm
nn Reliable magazine system
nn Rugged design for reliable, quick and efficient operation drives Cartridge type 6.8/18
Piston X-351 BT P G n 00378677 fasteners at the average rate of 600 per hour Cartridge color/level Green, Blue, Red, Black
nn Easy assembly and disassembly for on the-spot maintenance,
Stepped drill bit TX-BT 4/7-80 n 00377079 no tools required
nn Superior ergonomic design
Stepped drill bit TX-BT 4/7-110 n 00377080 nn Perfectly padded grip area 7
nn Comfortable, non-slip cycling grip
Stepped drill bit TX-BT 4/7-150 n 00377081
nn Excellent balance, less tiring to use
Ordering
Order designation Package content Item Number
Powder-actuated tool DX 76 PTR DX 76 PTR equipped with MX 76 PTR magazine and supplied in an impact-resist- 00388219
ant plastic toolbox complete with cleaning set, ear protectors, protective goggles,
standoff gauge and Hilti lubricant spray.
Powder-actuated tool DX 76 PTR Powder-actuated tool DX 76 PTR (African markets). 00382520
211 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 212
Direct Fastening Systems Direct Fastening Systems
Ordering
Order designation Package quantity Item Number
Nail
X-ENP-19 L15MX
For steel base material thickness: 6 mm up to solid steel.
Ordering
Order designation Package quantity Item Number
Ordering
Order designation Shank length Package quantity Item Number
MX Nail Shear connector X-HVB 50 50 mm 250 pcs 00056467
X-ENP2K-20 MX
Shear connector X-HVB 80 80 mm 250 pcs 00239357
For thin steel base material thickness: from 2.7 mm to 6 mm.
Shear connector X-HVB 95 95 mm 200 pcs 00348179
Shear connector X-HVB 110 110 mm 200 pcs 00348180
Shear connector X-HVB 125 125 mm 125 pcs 00348181
Ordering Shear connector X-HVB 140 140 mm 120 pcs 00348321
Order designation Special Items Package quantity Item Number 7
Sheet metal nail X-ENP2K-20 L15 MX * 1000 pcs 00385134
Order designation Package quantity Item Number
Sheet metal nail X-ENP2K-20 L15 * 100 pcs 00385133 DX cartridge 6,8/18 M red 1000 pc 00050603
Sealing Cap
SDK2/PDK2
Ordering
213 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 214
Direct Fastening Systems Direct Fastening Systems
Accessories Accessories
DX 76 PTR
DX 76 PTR
DX 76
DX 76
Order designation Item Order designation Item
Number Number
Nail magazine MX 76 PTR assy 00384255 Round brush 8/SO n n 00009355
DX 351 BT G/ DX 351 BT
Fastener guide X-76-F-10-PTR n n 00388850
DX 460 MX
DX 460 GR
DX 460 IE
DX 460
DX 36
Piston brake X-76-PB-PTR n n 00385205
215 07 Direct Fastening Systems www.hilti.com www.hilti.com 07 Direct Fastening Systems 216