0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
21 visualizzazioni8 pagine
Complete design for both low-rise and high rise building which includes designing beams, columns, slabs, footing and staircase considering seismic loading and other super imposed load.
Titolo originale
Full design of a low rise & high rise RcC building with shear wall according to bnbc-2015 and computation of their storey drifts
Complete design for both low-rise and high rise building which includes designing beams, columns, slabs, footing and staircase considering seismic loading and other super imposed load.
Complete design for both low-rise and high rise building which includes designing beams, columns, slabs, footing and staircase considering seismic loading and other super imposed load.
BNBC-2015 AND COMPUTATION OF THEIR STOREY DRIFTS By Suez Halder Atanu Mukharjee ID: 1401006 ID: 1401038 Supervised By: Dr. Nusrat Hoque OBJECTIVE
Complete design for both low-rise and high rise building
which includes designing beams, columns, slabs, footing and staircase considering seismic loading and other super imposed load.
Computation of story drifts for low rise building and
high rise building for each storey.
Design for axial force and bending for both
low rise and high rise building. METHODOLOGY
Low Rise Building
6-Story Two-unit Floor Plan Load Calculation with ETABS v17
Tabulating Results and Required Data in Excel
Designing Column with CSICOL v9
Designing Footing with CSISAFE v16
Checking Thickness of the Slab Calculating the Load Combination METHODOLOGY
High Rise Building
Floor Plan same as Low Rise Building (12 Story) Calculating Loads and Other Parameters Designing beams, columns, staircases considering the seismic effect (including time history, response acceleration spectrum, P-Δ effect etc.) from tabulated result Designing Pile Foundation
Computing Storey Drifts for both Low Rise and
High Rise Building. TWO-UNIT LOW RISE BUILDING PLAN DEFORMED SHAPE CONSIDERING SEISMIC LOADS TABULATED RESULTS FOR COLUMN FORCES TIME FRAME
Work Remaining Expected Date of Completion
Completion of Full Design of Low- March
Rise Building
Designing beams, columns, March- April
staircases for high rise building
Completion of Design of Pile April- May
Foundation for High Rise Building
Comparing Seismic drift for low April- May
rise and high rise building Drafting of final publication and May- June closing the project
Computational Wind Engineering 1: Proceedings of the 1st International Symposium on Computational Wind Engineering (CWE 92) Tokyo, Japan, August 21-23, 1992
Tall Buildings: The Proceedings of a Symposium on Tall Buildings with Particular Reference to Shear Wall Structures, Held in the Department of Civil Engineering, University of Southampton, April 1966