Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
AQUA SEALER
PRODUCT DESCRIPTION A low viscosity, non-solvent type, 100% volume solid epoxy polyamine
coating exhibiting excellent adhesion to most surfaces (steel, non-
ferrous, plastics, wood, concrete, glass etc.). Excellent water, chemical,
salt, oil resistance, underwater and low temperature curing capabilities.
Used in wrapping systems for excellent tensile strength.
* Surface should be clean and dry prior to overcoating. Chalking, if any, must be removed. If Aqua
Sealer has been exposed for long periods, fresh water washing should be conducted before application
of any coatings.
SYSTEMS AND Aqua Sealer may be used as a standalone coating system. Aqua Sealer
COMPATIBILITY maybe over coated with following products.
SURFACE PREPARATION Aqua Sealer is highly flexible coating in terms of surface preparation
requirements. Surface preparation may differ according to the final
exposure or application of Aqua Sealer. Refer to Sea Horse Services for
recommendation on required surface preparation.
MIXING Aqua Sealer is supplied in 2 parts, a liquid binder (Part A) and a liquid
binder (Part B). Always mix liquid (Part B) into the liquid (Part A) while
stirring. 75-100 RPM mixer is recommended. Material should be
screened prior to application.
NOTE ON CURING Aqua Sealer will cure in adverse conditions as well. However, curing time
may differ due to factors of application, temperature, thickness and
exposure.
AVAILABILITY & PACKING Available worldwide through Sea Horse Services Sdn. Bhd. and their
SIZE authorized agents.
IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive. Any person using this
product for any purpose other than that specifically recommended either in this data sheet
or by authorized representatives of Sea Horse Services does so at their own risk. All advice
given or statement made about the product (whether in the data sheet or otherwise) is
correct to our knowledge, however, we have no control on the quality and condition of the
substrate being coated with this product and hence Sea Horse Services does not assume
any liability arising out of misuse of this product. All safety precautions must be taken while
handling of this product. Please refer to MSDS for more details.
Issue date: June 2016 | Version: 1.0