Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
While this information is presented in good faith and believed to be accurate, Honeywell
disclaims the implied warranties of merchantability and fitness for a particular purpose and
makes no express warranties except as may be stated in its written agreement with and for its
customer.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages.
The information and specifications in this document are subject to change without notice.
Honeywell PlantScape, Experion, and TotalPlant are US registered trademarks of Honeywell
International Inc.
Symbol Definition
ATTENTION: Identifies information that requires special
consideration.
1.2 Purpose
The main purpose of this document is to provide a reference for each qualified switch firmware
versions that are used in the FTE Network. It also addresses concerns and recommendation on
support.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 1
2 FTE Qualified Switch Firmware Versions
The following tables contain the qualified firmware versions for each supported switch.
Previously qualified versions are listed in gray. Although previously qualified, it is recommended to
update to the latest qualified version, because Honeywell only qualifies new firmware versions
because of security, system/EPKS/FTE compatibility, or bug fixes and does not recommend all
updates released by vendors.
Honeywell’s latest FTE qualified IOS version may not be the latest IOS version offered and
recommended by Cisco. If a switch is removed from FTE service and reapplied in another
application, the switch should be considered for update to the latest Cisco recommended IOS
version.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 2
2.1.2 Currently Available Cisco Switches IOS Versions
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 3
2.1.3 Important Note for Cisco IOS Updates
Only the above IOS versions are supported by FTE. If more than one IOS version is listed
for a switch, the latest version will be shipped from the Honeywell factory. Although all IOS
versions listed are qualified for use with EPKS, it is recommended the latest (first listed)
version be used in all EPKS systems. Earlier versions may have shortcomings and present
security and/or performance issues.
The IOS versions in the table may not be the version Cisco ships with the listed switches.
However, all Cisco switches ordered using the Honeywell Model part number will ship with
the correct IOS version. If Cisco switches are not purchased directly from Honeywell, the
purchaser must ensure the switches are loaded with a qualified IOS version, both initially
and if subsequent Experion PKS releases are installed. Cisco IOS firmware can be
obtained from Cisco via the Cisco web site. If a particular IOS file is not available from
Cisco, contact Honeywell TAC.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 4
Honeywell Cisco Qualified IOS Cisco file name
Model Part Number (Latest First)
NE-SW248S WS-C2960-48TC-L 12.2(55) SE12 c2960-lanbasek9-mz.122-55.SE12.bin*
12.2(55) SE9 c2960-lanbasek9-mz.122-55.SE9.bin *
12.2(53)SE2 c2960-lanbase-mz.122-53.SE2.bin
12.2(50) SE1 c2960-lanbase-mz.122-50.SE1.bin
12.2(44) SE1 c2960-lanbase-mz.122-44.SE1.bin
12.2(25) SEE2 c2960-lanbase-mz.122-25.SEE2.bin
NE-SW248T WS-C2960-48TT-L 12.2(55) SE12 c2960-lanbasek9-mz.122-55.SE12.bin*
12.2(55) SE9 c2960-lanbasek9-mz.122-55.SE9.bin *
12.2(53)SE2 c2960-lanbase-mz.122-53.SE2.bin
12.2(50) SE1 c2960-lanbase-mz.122-50.SE1.bin
12.2(44) SE1 c2960-lanbase-mz.122-44.SE1.bin
12.2(35) SEE2 c2960-lanbase-mz.122-35.SEE2.bin
NE-SW324S WS-C3560-24TS-S 12.2(55) SE12 c3560-ipbasek9-mz.122-55.SE12.bin *
12.2(55) SE9 c3560-ipbasek9-mz.122-55.SE9.bin *
12.2(53)SE2 C3560-ipbase-mz.122-53.SE2.bin
12.2(50) SE1 c3560-ipbase-mz.122-50.SE1.bin
12.2(44) SE1 c3560-ipbase-mz.122-44.SE1.bin
* IOS Supports Secure Shell (SSH). SSH is a cryptographic secure channel replacement for Telnet.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 5
was 5/2011, and the 2955 switch end of support was 7/2018. The following replacements
are recommended:
The 2950 family of switches should be replaced with either 2960+ switches for 100 m/b
operation only or the 2960X family of switches, if future 1 GB operations is expected.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 6
2.3.2 MOXA switch
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 7
3 References
Reference the latest version of the Software Change Notice FTE Cisco IOS Updates on
honeywellprocesssolutions.com for specific details for the Cisco switches updates.
Experion PKS Network FTE Qualified Switch Firmware Versions Honeywell Process Solutions
Subject to change without notice 8