Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
T. D. Williamson, Inc.
Sizes: 4” and Larger Bulletin No: 1030.001.00
Date: February 1999
Cross Indexing No: n/a
Supersedes: 501.0 (8/1/87)
Bleeder Valve
Features Housing
Equalization
Connection
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Dimensions and Part Numbers
®
T. D. Williamson, Inc.
STOPPLE Plugging Machine ®
STOPPLE® Housings
Housings For Jackscrew Cylinders: Class 150 Class 300 Class 600
Inches DN Lbs. Kg. Part Number Lbs. Kg. Part Number Lbs. Kg. Part Number
4 100 32 15 08-0319-0000 43 20 08-0320-0000 60 27 08-0300-0000
6 150 56 25 08-0322-0000 73 33 08-0323-0000 75 34 08-0302-0000
Housings For Hydraulic Cylinders:
6 150 56 25 08-0270-0000 73 33 08-0276-0000 75 34 08-1715-0000
8 200 92 42 08-0202-0000 130 59 08-0213-0000 187 85 08-1716-0000
10 250 128 58 08-0203-0000 185 84 08-0214-0000 270 122 08-1645-0000
12 300 200 91 08-0204-0000 285 129 08-0215-0000 350 159 08-0129-0000
14 350 327 148 08-0205-0000 410 186 08-0216-0000 570 259 08-1647-0000
16 400 410 186 08-0206-0000 535 243 08-0217-0000 660 299 08-0131-0000
18 450 480 218 08-0207-0000 655 297 08-0218-0000 955 433 08-0132-0000
20 500 600 272 08-0208-0000 735 333 08-0219-0000 1025 465 08-1648-0000
22 550 770 349 08-0209-0000 985 447 08-0220-0000 1365 619 08-1664-0000
24 600 935 424 08-0210-0000 1225 556 08-0221-0000 1740 789 08-1649-0000
26 650 1075 488 08-0211-0000 1410 640 08-0222-0000 1875 851 08-1864-0000
30 750 1425 646 08-0212-0000 1795 814 08-0223-0000 2440 1107 08-1650-0000
36 900 1550 703 08-0423-0000 2100 953 08-0360-0000 5130 2327 08-2257-0000
42 1050 -- -- -- -- -- -- 6927 3142 08-1670-0000
48 1200 -- -- -- -- -- -- 7500 3402 08-2052-0000
Note: Housings are equipped with flanges which are drilled, faced and pressure-rated to match ANSI Class 150, 300 or 600 flanges.
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Dimensions and Part Numbers
®
T. D. Williamson, Inc.
STOPPLE Plugging Machine ®
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Dimensions and Part Numbers
®
T. D. Williamson, Inc.
Section of line
to be replaced.
SANDWICH®
STOPPLE® Fitting
Tapping Valve
Bypass
Fitting Bypass
Flow Tapping Valve
Flow
STOPPLE® Fittings with LOCK-O-RING® Flanges* are welded on each end of the section to be isolated. Bypass A Tapping Valve* is mounted on each fitting and taps are made through the valves into the pipeline. The cutter
fittings with LOCK-O-RING Flanges and equalization fittings are welded to the line. is withdrawn after each tap, the valve closed, and tapping machine removed.
*See LOCK-O-RING Flanges, Bulletin 1120.001.00. *See SANDWICH® Valve, Bulletin 1020.001.00.
STOPPLE®
Plugging Machine New Section
STOPPLE®
Blind Flange
Plugging Machine
LOCK-O-RING®
Flange w
Bypass Line Flo
Blind Flange
Flow
Flow LOCK-O-RING®
Flange
A
w
Flo
Flow
Bypass connections are made and the bypass valves are opened. STOPPLE® Plugging Machines are mounted Tapping machine cutters are replaced with LOCK-O-RING® Plugs, and tapping machines (or machine) are
and the plugging heads are lowered through valves into sealing position. After the new section is tied in, mounted on valves. The LOCK-O-RING® Plugs are lowered into position inside LOCK-O-RING® Flanges.
pressure is equalized by connection from the STOPPLE® Housing to the pipeline (See A). Tapping machines are removed, valves recovered, and blind flanges installed.
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA