Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
High-build solvent free epoxy coating system for traffic deck protection
DESCRIPTION PACKAGING
MasterTop 1210CP is a multi component solvent
free epoxy coating system designed for application MasterTop P 651 25.4kg
at a total thicknesses between 1.0mm-2.0mm on MasterTop P 650 15kg
basement and ground floor car parks, or on MasterTop 1210CP (Neutral) 25.4kg
intermediate traffic decks exhibiting little or no MasterTop Color Pack 0.6kg
structural movement. MasterTop SR 3 25kg
MasterTop 1210CP may be applied to produce a MasterTop TC 444 18 litres
durable medium or heavy duty profiled finish. Optional UV top coats
MasterSeal TC 257 22.5kg
MasterSeal TC 258 24kg
PRIMARY USES
MasterTop 1210CP has good wear and abrasion
CONSUMPTIONS & DFT’S
resistance and is suitable for use on many traffic
deck applications.
Volume & kgs of Approx.
mixed resin (approx.) System DFT
MasterTop 1210CP provides a seamless coating
Medium Duty 0.75kg 0.5 litres 1.0mm
for concrete to protect against vehicle related Heavy Duty 1.1kg 0.70 litres 2.0mm
spillages such as common oils, greases, lubricants,
aviation fuels or A.C fluid. In addition it offers good
general chemical resistance, but as in all corrosive PHYSICAL PROPERTIES*
situations, a full analysis of operating and exposure
conditions is required, followed by reference to Pot life @25°C 40 mins
chemical resistance data to ensure product @40°C 22 mins
suitability. Curing time @25°C 15 hours
@40°C 10 hours
MasterTop 1210CP may used in the following Maximum service temp 60°C
applications: ** Flexural Strength ASTM C580 >40N/mm²
** Tensile Strength ASTM C307 >18N/mm²
Car production and storage facilities.
Aircraft hangars and maintenance areas. Dry 114,
Slip resistance BS 7976 Part 2
Wet 64
Car workshops
Traffic decking Bond strength ASTM D4541 >2.0N/mm²
Pedestrian walkways **tested at 25°C
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.