Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Page 1 of 6
V E N T S P A C E S P R I
PROJECT NAME: INDIQUBE / ALPHA/ CAFETERIA
1. CIVIL & INTERIORS
8. Civil Work
8.03 8.04 8.05 8.06 8.07 8.08 A B C D 8.09 8.10 9.01 A B C 9.02 A B C 9.03 A
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 7 8 11 8 0 6 15 4 3 21 2 0 16 6 77 0 9 66 7 0 5
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.00
-
Page 2 of 6
R I V A T E L I M I T E D.
9. Flooring
TOTAL
AMOUNT.
B C D E 9.04 A B C 9.05 9.06 9.07 9.08 A B C 9.09 9.10 9.11 9.12 9.13
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 3 11 2 0 45 5 6 7 12 9 0 9 8 15 7 6 12 16 18
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0.00 -
-
Page 3 of 6
SL.
NO.
1.0
1.1
b
1.2
a
b
1.3
1.4
a
1.5
2.0
3.0
a
b
c
d
e
f
g
h
i
j
k
l
m
o
p
q
r
s
t
4.0
5.0
6.0
a
b
c
d
7.0
a
8.0
b
c
d
g
BOQ DESRIPTIONS
Providing and laying in position 600mm x 600mm Anti skid Vitrified Tile of approved make and shade,
the tile shall be fixed over a bed of minimum 25mm thick cement mortars of 1:4 ratio and cement
slurry backing applied @ 4.5kg/m2 with approved cement and sand, the finishing of the tile flooring
work should be proper slope, line, level, pattern, matching to the flow grains etc.., as per the detailed
drawings and specification. The Tile joints should be of paper joint type, joints shall be properly
grouted and finished with jointing compound of cementitious polymer grout and matching pigment
of approved Bal-Endura/ Laticreate or equivalent make. Rate shall include for all materials, labour,
necessary cutting, wastage, light acid wash, preparing of floor including removing of loose mortar,
concrete, dust, etc., and making necessary cutouts for services, adhesive, tools & tackles, lead & lift,
cleaning and handing over etc.., work complete at all Floors & Levels as per the approved drawings,
design, pattern, profile, technical specification and as directed by the Employer/ Consultant/
Architect. Payment will be done for actual laid area as per IS standards
Granite Flooring
WALL CLADDING
Providing and fixing in position approved Vetrified Tile Dadoing/ Cladding of size 600 x 600mm to
Toilet walls, columns, and other specified areas with paper joint and in required pattern. providing
and applying average 10mm thick base plastering on existing rough plastered wall to make the surface
line and plumb as required to recive the tiles. Tile shall be fix with backing of thick cement slurry/
paste with approved cement and sand, The finishing of the tile cladding should be proper line, level,
plumb, pattern, matching of flow grains etc.., as per the detailed drawings, The Tile joints should be of
paper joint type, joints shall be properly grouted and finished with jointing compound of
cementitious polymer grout and matching pigment of approved Bal-Endura/ Laticreate or equivalent
make. Rate shall include for all materials, labour, necessary cutting, wastage, light acid wash,
preparing of wall including removing of loose mortar, concrete, dust, necessary chipping, scaffolding
etc., and making necessary cutouts for services, adhesive, tools & tackles, lead & lift, cleaning and
handing over etc.., work complete at all Floors & Levels as per the approved drawings, design,
pattern, profile, technical specification and as directed by the Employer/ Consultant/ Architect.
Providing and fixing in position 19mm thick approved Pre-polished Granite Cladding to walls,
columns, lift jambs, sofits and other vertical/ horizontal faces, the granite slabs shall be cut to
required size and aligned in line with proper flow grains. Granite shall be fix backing with minimum
30mm thick cement mortar/ slurry of 1:4 ratio, the slabs should be edge machine cut and polished to
produce very fine joints and making necessary edge polish, the finishing of the granite work should be
proper line, level, plumb, pattern, matching to flow grains, exposed edge polishing, making grooves,
edge chamfering etc.., as per the detailed drawings and specification. Including leveling the existing
wall surface with base plaster to receive the granite slabs. The Granite joints should be of paper joint
type, joints shall be properly grouted and finished with jointing compound of cementitious polymer
grout and matching pigment of approved Bal-Endura/ Laticreate or equivalent make. Rate shall
include for all materials, labour, slab cutting, required polishing, wastage, curing, light acid wash,
preparing of wall including hacking to RCC surface, removing of loose mortar, concrete, dust,
necessary chipping, scaffolding etc., and making necessary cutouts for services, adhesive, tools &
tackles, lead & lift, cleaning and handing over etc.., work complete at all Floors & Levels as per the
approved drawings, design, pattern, profile, technical specification and as directed by the Employer/
Consultant/ Architect. Payment will be done for actual laid area as per IS standards.
COUNTER
Providing and fixing in position 40mm thick, 600mm wide polished Granite wash basin counter Top,
40mm thick granite shall be made with 2 layer of 20mm thick granite slabs with necessary edge
chamfer and grooves as per design shown in the drawing, Counter top shall be placed on 12mm thick
Marin grade plywood with MS angle frame work supports, MS frame should fabricated with 40mm x
40mm x 6mm L angle and fixed at minimum 1.00m c/c intervals with necessary concrete packing,
including necessary nosing, edge polishing, necessary cut-outs for fixing of wash basin/ Sink,
plumbing, electrical and lighting fixtures etc.., Rate shall include cost of materials, labour, slab cuttion,
polishing, covering, tools & tackles, lead & lift, cleaning and handing over etc.., work complete at all
Floors & Levels as per the approved drawings, technical specification and as directed by the
Employer/ Consultant/ Architect.
Providing and fixing in position 40mm thick, 600mm wide Hazel Granite wash basin counter Top,
40mm thick granite shall be made with 2 layer of 20mm thick granite slabs with necessary edge
chamfer and grooves as per design shown in the drawing, Counter top shall be placed on 12mm thick
Marin grade plywood with MS angle frame work supports, MS frame should fabricated with 40mm x
40mm x 6mm L angle and fixed at minimum 1.00m c/c intervals with necessary concrete packing,
including necessary nosing, edge polishing, necessary cut-outs for fixing of wash basin/ Sink,
plumbing, electrical and lighting fixtures etc.., Rate shall include cost of materials, labour, slab cuttion,
polishing, covering, tools & tackles, lead & lift, cleaning and handing over etc.., work complete at all
Floors & Levels as per the approved drawings, technical specification and as directed by the
Employer/ Consultant/ Architect.
SKIRTING
SKIRTING (100MM HT)
LEDGE WALL COPING
150 MM Width LEDGE WALL COPING
FALSE CEILING
MS GRID (600*600mm) FALSE CEILING @ Height of 2.55m from FFL
'Providing & Fixing of Lay in GI Micro-Perforated ceiling System consisting of 600x600mm Lay in tiles
of pre coated GI Metal in 0.5 mm thickness in white Color with perforation of 1.5mm dia & open area
of 22% with Freudenberg soundtex acoustical fleece on the back of the tile to be laid on Armstrong
grid systems with 15mm wide T - section flanges colour white having rotary stitching on the Main
Runner, 1200 mm & 600 mm Cross Tees.
The tiles should have Humidity Resistance (RH) of 100%, NRC of 0.75, Fire Performance A2-s1.d0 in
module size of 600 X 600 mm, suitable for Green Building application, with Recycled content of 50%.
The Tile & Grid system used together should carry a 15 year warrantee.
INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural
soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The
First/Last Armstrong suspension system at the end of each main runner should not be greater than
450mm from the adjacent wall.
Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to
form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x
600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the
1200 mm cross tees.
Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm
maximum centres.
ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World
Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size
26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia –
2.68 mm of 1.83 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with
Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull
strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the
main runner.
Providing and fixing in position 20mm thick polished Granite Urinal partition, partition shall be
1000mm height, 450mm wide at top & 375mm at bottom and edges shall be finished with beveled
edge with polish as per the drawings, including fixing the partition with necessary accessories as per
the detailed drawing. Rate shall include cost of materials, labour, slab cutting, polishing, covering,
tools & tackles, lead & lift, cleaning and handing over etc.., work complete at all Floors & Levels as per
the approved drawings, technical specification and as directed by the Employer/ Consultant/ Architect
DOORS
VISION /FLUSH DOOR : SIZE 1000*2100mm
'Shutter : 30mm thk Solid core flush door with 1mm thk Laminate on both sides,
'Frame : 100 x 50mm thk Timber with Enamel paint/Melamine Polish finish. ( Colour to be matched
with laminate finish)
'Handle: 325 mm High and 25mm thk S.S D/ C- type Handle ( Ozone: OGH-11)
'Lockset : Mortise lock with dead bolt - OZM-DL1-55mmSS, with Key opening on the outside & Thumb
turn on the inside - OMC-22-K2N-N-70
'Hinges: 4 no's Ozone SS ball bearing Hinges -OZ-BH-2BB 5x3x3
'Door Closer: Ozone - NSK 680 / 680-A/ Dorset- DC80Ext
70 micron powder coated Z type Aluminium Louvered Panel size of 600mm x 250mm at bottom
PARTITIONS
Cubical Partitions of HPL Greenlam with accessaries SS coat hook, SS indicative lock, SS top rail for
cubicle, SS door knob etc. as per drawing
LIGHTS
Recessed mounted Lights
Surface mounted Lights
TUBE LIGHT (2'*4') Make - Philips, Model - ASTRA 9w(cool white)
Cove Lights
CIVIL WORKS
Block/Brick works
200mm thk Block
150 mm thk Block
100mm thk Block
Providing & plastering to internal Solid Blocks masonry wall/concrete surface 12mm to 15mm thk in
CM 1:5, including providing & removing scaffolding, rounding off all corners wherever required,
curing , hacking etc., complete. With all lead and lift as directed by engineer in charge.
12mm thk Painting (Smooth Finish) colour as per detail drw & as per 3D,Grey Colour Gothin 8312
MISCELLINEOUS WORKS
Providing and fixing in position 8mm Thick Mirror panel of approved make, all four side/ edges of the
mirror shall be beveling as per the detailed drawing, mirror shall be fixing with approved SS studs,
anchors and necessary required hardware, (All Stainless Steel shall be 316 grade). Rate shall include
cost of materials, labour, cutting, polishing, covering, tools & tackles, lead & lift, cleaning and handing
over etc.., work complete at all Floors & Levels as per the approved drawings, technical specification
and as directed by the Employer/ Consultant/ Architect
Storage as per Detail Drw & 3D in MS black color paint inside Ply with laminate sections
Reflector
Storage below Counter (detailing as per Dwgs)
Providing railway cinder concrete in Sunken portion of floor of proportion one part of cement and
sand in 1:8 proportion and dry cement mortar to be mixed with (1:15) fifteen parts of cinder by
volume. (note : the cinder from brick kilns shall not be used. the cinder should be soaked in water
before mixing and shall be cured for seven days).For all slabs
4" pipe
2.5" pipe
TOTAL AMOUNT
RATE AMOUNT
LOCATION UNIT QTY SUPPLY
SUPPLY INSTALLATION AMOUNT
NO'S 50.00
NO'S 60.00
NO'S 50.00
NO'S 88.00
NO'S 12.00
NO'S -
NO'S 52.00
NO'S 52.00
NO'S 52.00
NO'S
NO'S
NO'S
Hand Wash Area NO'S
NO'S
Hand Wash Area NO'S
NO'S 12.00
NO'S 12.00
NO'S 36.00
NO'S 12.00
NO'S
NO'S 181.00
NO'S
Rmt 450.00
Sqm 480.00
Sqm
NO'S 1.00
NO'S
Sqm 34.00
Rmt 100.00
Rmt 150.00
21,906,200
AMOUNT
TOTAL AMOUNT REMARKS
INSTALLATION
2,743,200
333,000 599,400
165,600 345,000
-
770,400 1,284,000
102,200 197,100
11,200 25,200
112,500 292,500
- -
- -
366,300
366,300
-
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
20,800 46,400
1,371,000
77,000 1,023,000
28,000 348,000
19,200,000
200,000 19,200,000
-
- -
- -
- -
- -
-
-
105,600
- -
79,800 79,800
89,700 89,700
15,900 15,900
- -
- -
- -
36,000
36,000 36,000
- -
- -
- -
33,300 33,300
- -
- -
2,042,100 23,948,300
Contractor Name :
WORK ORDER
Company :
Project :
Floor/Title :
Scope Of Wok :
1.3 COUNTER
a 600mm width counter top finished with Granite
b Counter top finished witch Hazel Granite
1.5 SKIRTING
a SKIRTING-75MM HT.
1.6 LEDGE WALL COPING
5.0 PARTITIONS
a Cubical Partitions of HPL Greenlam
b Urinal Partitions
6.0 LIGHTS
a RECESSED CEILING LIGHT
b Surface mounted Lights
c TUBE LIGHT (2'*4')
COVE LIGHT For MIRROR
COVE LIGHT For Mirror- 700mm wide * 1350mm Height
d COVE LIGHT For Mirror- 702mm wide * 2275mm Height
COVE LIGHT For Mirror-630mm wide * 2275mm Height
COVE LIGHT For Mirror- 600mm wide * 920mm Height
COVE LIGHT For MIRROR
Tra nsportaion at actuals
7.0 CIVIL WORKS :
a BLOCK/BRICK WORK
TOTAL RATE
NO'S L B QUANTITY QUANTITY
SUPPLY INSTAL
0.878 0.88
1.000 1.00
0.985 0.99
0.985 0.99
3.85 4.04 260.00 220.00
26.76 26.76 28.10 1250
3 1.155 3.47 3.64 1250
2 1.82 10.94
1 1.55 4.65
1 1.53 4.58
1 1.00 0.93
1 1.00 0.93
1 1.00 0.93
1 0.88 0.82
23.77 24.96 1150.00
3.925 1.77
1 0.40
1.973 0.89
1.973 0.79
2.752 1.24
0.878 0.40
5.936 2.67
2.025 0.81
1.675 0.67
9.63 10.11 350.00
91.30 91.30 95.86 195.00
19.26 19.26 180.00
247,635
9,600.00 2,200.00 11,800.00
22,360.00 4,000.00 26,360.00
12,000.00 2,200.00 14,200.00
16,000.00 550.00 16,550.00
49,560.00 8,000.00 57,560.00
5,000.00 2,200.00 7,200.00
3,900.00 1,000.00 4,900.00
4,550.00 3,850.00 8,400.00
6,750.00 550.00 7,300.00
1,175.00 250.00 1,425.00
11,700.00 250.00 11,950.00
17,500.00 250.00 17,750.00
4,900.00 1,000.00 5,900.00
650.00 250.00 900.00
1,300.00 - 1,300.00
650.00 - 650.00
- - -
2,700.00 450.00 3,150.00
38,340.00 12,000.00 50,340.00
48,000
48,000.00 48,000.00
106,500
82,500.00 - 82,500.00
24,000.00 - 24,000.00
21,150
9,000.00 - 9,000.00
-
580.00 - 580.00
-
-
-
-
-
11,570.30 - 11,570.30
-
54,404
-
-
-
-
-
-
-
-
28,706.40 - 28,706.40
-
-
-
-
-
-
-
-
-
-
-
-
3,538.29 - 3,538.29
18,692.83 - 18,692.83
3,466.08 - 3,466.08
69,630
13,395.38 - 13,395.38
15,092.12 - 15,092.12
6,772.11 - 6,772.11
-
2,608.20 - 2,608.20
3,000.00 - 3,000.00
4,000.00 - 4,000.00
24,761.95 - 24,761.95