Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.huawei.com
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page2
Objectives
After completing this course, you will be able to:
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page3
Contents
1. DCN deployment solutions
2. Configuration Roadmap
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page4
Contents
1. DCN deployment solutions
2. Configuration Roadmap
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page5
DCN deployment solutions
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page6
Public DCN solution
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page7
DCN VRF solution
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page8
Contents
1. DCN deployment solutions
2. Configuration Roadmap
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page9
Configuration Roadmap - Public DCN
solution
A management VPN is created on the backbone network. A management
loopback address is created for each backbone device and bound to the
management VPN.
New loopback addresses (different from the LSR IDs) are planned for
devices in the IPRAN. The addresses are used as the public network
management addresses of the devices. The loopback routes are added
with tags and imported into the IGP.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page10
Configuration Roadmap - DCN VRF
solution
Configure SNMP for all NEs to be managed.
Query and record NE IDs and IP addresses. If the default NE IDs and IP
addresses are not used, plan new NE IDs and IP addresses.
Configure a VPN for the gateway NEs and interfaces connected to the
U2000, bind the VPN to the DCN. and configure related IP addresses.
Enable the DCN auto-report function for the MASGs, which function as
the gateway NEs.
Configure static routes between the U2000 server and the IP addresses
of the NEs to be loaded, to make the NEs reachable to the U2000.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page11
Configuration Roadmap - DCN VRF
solution
On ASBRs at the core layer:
Bind the interfaces connected to different IPRAN areas to the corresponding OSPF
process configured with DCN VRF.
Configure route importing for the ASBRs: import routes of the U2000 to the OSPF
process of the aggregation ring in the IPRAN area, and import routes of the OSPF
process into the core ring.
Bind the interfaces connected to different access rings to the corresponding OSPF
process configured with DCN VRF.
Configure route importing on the ASGs: import routes of the U2000 to OSPF
processes for access rings, and import routes of the OSPF processes into the
aggregation ring.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page12
Contents
1. DCN deployment solutions
2. Configuration Roadmap
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page13
Data Planning - Public DCN solution
Device Parameter Value
NMS VPN instance __dcn_ideal__
No.: Interfaces GE7/1/11 on MASG1 and
Interfaces connecting to
MASG2 IP addresses: 130.10.100.1/24 for
the U2000
MASG1, and 130.10.100.2/24 for MASG2
MASG vrid: 22
VRRP
virtual-ip: 130.10.100.10
MASG1:LoopBack65535,
Management interface and 200.0.100.9/32
IP address MASG2:LoopBack65535,
200.0.100.10/32
NMS VPN instance __dcn_ideal__
ASBRs at the ASBR3:LoopBack65535,
core layer Management interface and 200.0.100.7/32
IP address ASBR4:LoopBack65535,
200.0.100.8/32
ASBR1:LoopBack65535,
ASBRs and
200.0.100.5/32
ASGs at the
ASBR2:LoopBack65535,
aggregation Management interface and
200.0.100.6/32
layer. CSGs
Copyright at Huawei
© 2014 IP address
Technologies Co., Ltd. All rights reserved. Page14
ASG3:LoopBack65535, 200.0.100.3/32
Data Planning - DCN VRF solution
Parameter Value Remarks
By default, the IP
address and ID of an NE
are correlated.
If an NE ID is modified,
the NE IP address is
Factory default. The value can modified accordingly.
NEID be modified according to the However, if the NE IP is
network plan. modified, the NE ID is
not modified accordingly.
After the NE IP address
is modified, the default
correlation relationship
loses effect.
Factory default. The value can All NE IP addresses are
NEIP be modified according to the in the 128.0.0.0/8
network plan. network segment.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page15
SNMP parameters - 1
Parameter Value Remarks
Enables this function in
snmp-agent sys-info
all SNMPv1, SNMPv2C, and
version
SNMPv3.
snmp-agent mib-view The SNMP MIB view
iso
included iso-view contains the iso subtree.
Sets read and write
community names. The NMS
can access a device only
snmp-agent community cipher Huawei123!
when the community names
read cipher mib-view iso-view
set on the NMS are the
same as that set on the
device.
Sets read and write
community names. The NMS
can access a device only
snmp-agent community cipher Huawei@123
when the community names
write cipher mib-view iso-view
set on the NMS are the
same as that set on the
device.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page16
SNMP parameters - 2
Parameter Value Remarks
Enables all traps on a
snmp-agent trap enable –
device.
Sets the LoopBack
Core layer equipment: interfaces as the source
snmp-agent trap source
LoopBack 65535 interfaces for sending Trap
messages.
address udp-domain
Allows the SNMP agent to
130.10.100.20
snmp-agent target-host send SNMP trap messages
params securityname
trap to the Huawei NMS at
Huawei@123 v2c private-
130.10.100.20.
netmanager ext-vb
snmp-agent trap enable Enables the LLDP trap
–
feature-name lldp function.
snmp-agent extend error- Opens the extended error
–
code enable codes of devices.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page17
Summary
1. Public DCN solution.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page18
Thank you
www.huawei.com