Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.huawei.com
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page2
Objectives
After completing this course, you will be able to:
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page3
Contents
1. Inter-AS BGP LSPs Deployment Solution
2. Configuration Principle
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page4
Contents
1. Inter-AS BGP LSPs Deployment Solution
2. Configuration Principle
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page5
Labeled BGP Design: HVPN+Labeled BGP
(Multi-AS)
AS10 AS20
0 NHS NHS 0
CSG1 ASG3 ASBR1(RR) ASBR3 MASG1
Labeled iBGP
Labeled eBGP
AS10 AS20
0 NHS NHS 0
CSG1 ASG3 ASBR1(RR) ASBR3 MASG1
Pre-value:32768
ASG3:50
eNodeB ASG4:100 MME/SGW
MASG1:50
MASG2:100
MED
Pre-value:32768
ASG3:100
ASG4:50
MASG1:100
CSG2 ASG4 ASBR2(RR)
MASG2:50 ASBR4 MASG2
eNodeB NHS NHS
Labeled iBGP
Labeled eBGP
CSG
ASG4
ASBR2 ASBR4 MASG2
TE/LDP Label push swap pop push swap pop push swap pop
pop swap push pop swap push pop swap push TE/LDP Label
TE/LDP LSP TE/LDP LSP TE/LDP LSP
• There are two layers of tunnels. The IGP domain provides external tunnels, for deploying TE, LDP LSP, or TE+LDP LSP tunnels. During the initial
deployment of an LTE network, it is recommended to deploy TE+LDP LSP tunnels.
• BGP LSP tunnels are used as inter-AS tunnels and are set up using the Labeled BGP. At the service level, the HVPN solution is used. Inter-AS BGP
LSPs need to be set up only between ASGs and MASGs.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page8
Contents
1. Inter-AS BGP LSPs Deployment Solution
2. Configuration Principle
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page9
Flowchart for configuring BGP LSP
Configure Configure
Configure Configure
tunnel- Labeled BGP
routing policy BGP AS
selector peer
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page10
Contents
1. Inter-AS BGP LSPs Deployment Solution
2. Configuration Principle
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page11
Labeled BGP parameters Introduction
Parameter Value Remarks
apply mpls-label apply mpls-label Applies for a label for public network routes in
the routing policy .
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page12
Labeled BGP parameters Introduction
Parameter ASG3 ASG4 ASBR1 ASBR2
BGP process
100 100 100 100
ID
router-id 3.3.3.3 4.4.4.4 5.5.5.5 6.6.6.6
ASG3:3.3.3.3(clien ASG3:
ASBR1: ASBR1: t) 3.3.3.3(client)
5.5.5.5 5.5.5.5
iBGP peer ASG4: ASG4:
ASBR2: ASBR2: 4.4.4.4(client) 4.4.4.4(client)
6.6.6.6 6.6.6.6
ASBR2:6.6.6.6 ASBR1:5.5.5.5
Cluster ID - - 5.5.5.5 6.6.6.6
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page14
Contents
1. Inter-AS BGP LSPs Deployment Solution
2. Configuration Principle
3. Data Planning
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page15
Labeled BGP Checking Procedure
1. Run the display bgp peer [ verbose ] command to check information
about all BGP peers.
4. Run the display mpls lsp protocol bgp command to query the status of a
BGP LSP.
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page16
Summary
1. Labeled BGP Design and Deployment on ATN + CX
Network
Copyright © 2014 Huawei Technologies Co., Ltd. All rights reserved. Page17
Thank you
www.huawei.com