Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DOOR DETAILS
Flush Glazing • Pressure Wall • Division Bar • Tubes • Angles • Channels • Bars • Sheets & Panels
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
NJ 973 - 684 - 0200 • NY 212 - 736 - 6435
Outside NY/NJ 800 - 777 - 0787 • FAX 973 - 684 - 0118
REBCO ALUMINUM
ENTRANCE DOORS
Our entrances range from specially reinforced narrow stile doors to heavy duty
wide stile types. At REBCO, your most unusual entrance projects are handled
quickly and precisely. When it comes to custom detailing, our skilled craftsmen
are eager to meet your most difficult demands.
We'll fabricate entrances with special grids and panels to enhance the building’s
appearance and tailor the door to specific applications. Add a glazing bead in a
complimentary or contrasting color (or finish), or make the entrance two-tone
(one to compliment the interior of the building and another to coordinate with the
building exterior). We manufacture a wide variety of standard entrances, however,
our ability to fabricate to your custom specifications is unparalleled.
Doors can also be customized with special push-pull hardware to meet your
exacting specifications. Because Rebco entrances are fabricated from a wide
variety of stiles, it is easy for you to customize your own door!
REBCO also stocks the largest selection of architectural aluminum shapes in the
New York Metropolitan area, and serves the building industry from coast to coast.
We carry a complete line of storefront extrusions from pressure wall, seamless
mullion and flush glaze systems down to division bars, sash, bar stock, panels and
sheets – all available in a variety of finishes.
In addition, REBCO manufactures a complete line of commercial windows – hop-
pers, vents, casements and fixed units, or any combination in both thermal and
non-thermal framing.
DOUBLE ACTING
CENTER HUNG Interior
Can be made single acting (by use of an applied angle
in the head) upon request.
NOTE: This type of entrance cannot be fully weathered. Exterior
IN SWING
Interior
Interior
Exterior
Exterior
OUT SWING
Interior Interior
HLSI HRSI
Left Hand Swing In Right Hand Swing In
Exterior Exterior
Interior Interior
HLSO HRSO
Right Hand Swing Out Left Hand Swing Out
or Left Hand Reverse Exterior or Right Hand Reverse
Exterior
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
2. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
THE BASIC THREE
©Rebco, Inc.
©Rebco, Inc.
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 3.
INDEX
Astragals Dummy Cylinder............................................ 50 Panel Doors
1/4" Panel Door................................. 20-21
Pair of Doors............................................... 52 Electric Release............................................... 51
1" Panel Door..................................... 20-21
Panic Astragal............................................. 52 Escutcheon....................................................... 50 1-1/2" Panel Door............................ 22-23
Single Door................................................. 52 Finger Guard................................................7, 50 Deco-Panel Door....................................... 13
Center Hung Door..................... 40, 42-44 Latch Locks....................................................... 51 The Basic Three................................................. 3
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
4. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
GENERAL SPECIFICATIONS
Entrance doors shall be as detailed and manufactured by REBCO, Incorpo-
rated, Paterson, NJ.
MATERIALS – Sections shall be extruded 6063-T5 aluminum alloy and SUPER STRENGTH SERIES "N" - Narrow Stile Door – Standard door
temper suitable for special anodic finishing. Major tubular portions of door thickness of 1-3/4" with 2" vertical stiles, 2-3/4" top horizontal rail and
stiles and rails shall be a nominal .125" thickness and glazing molding shall 3-7/16" bottom horizontal rail. A 6-13/16" or 10" bottom horizontal rail, as
be .050" in thickness. Material dimensions are subject to normal aluminum well as other available horizontal rails may be substituted for extra strength
extrusion tolerances. and design flexibility.
WORKMANSHIP – Entrance units shall be completely factory assembled and SUPER STRENGTH SERIES "M" - Medium Stile Door – Standard door
include doors, frames, sidelights, transoms and hardware as required. Corners thickness of 1-3/4" with 3-1/2" vertical stiles, 3-7/16" top horizontal rail
of doors shall be accurately joined and fitted with a flush hairline joint. Doors and 6-13/16" bottom horizontal rail. A 10" bottom horizontal rail, as well
shall be of triple reinforced construction having reinforced anchor blocks, as other available horizontal rails may be substituted for extra strength and
coin punched, interlocked into the top and bottom rails, bolted to the stiles design flexibility.
and secured in place with dome lock washers, then welded at the top and
SUPER STRENGTH SERIES "W" - Wide Stile Door – Standard door
underside of each corner. The weld shall thoroughly penetrate the material
thickness of 1-3/4" with 5" vertical stiles, 5" top horizontal rail and 6-13/16"
and produce a complete fusion of metal between stiles and rails. All welding
bottom horizontal rail. A 10" bottom horizontal rail, as well as other available
shall be on unexposed surfaces to prevent pitting, discoloration, weld halo
horizontal rails may be substituted for extra strength and design flexibility.
or other surface imperfections. No mechanical joints will be permitted. Glaz-
ing of doors shall be of E.P.D.M. or of vinyl type gasket. No screws shall be MID-RAILS – Extruded aluminum mid-rails of 3/8", 2", 3", 4-1/2", 5-3/4",
needed to secure glazing stops in place. Standard stops are available for 1/4", 7-9/16", and 10" are available to add greater strength and durability, conceal
5/8" and 1" glazing. Special taller stops for 1" glazing are also available. All an exit device from view or divide the glazing area of the door.
cutouts, recesses, mortising or milling operations required for hardware shall
be accurately made and reinforced with backing plates as required to insure ALUMINUM PANEL INSERTS – Double face, textured-finish aluminum panel
adequate strength of the connection. inserts for use below extruded aluminum mid-rails are available in 1/4", 1"
Lock stiles for single doors shall be beveled type. Lock stiles for pairs of doors and 1-1/2" thickness to effectively meet the demands of high traffic areas.
shall be two-piece with adjustable nosing and rubber grommets for ease of
TRUE DIVIDED LITES – Vertical and horizontal 3/8" solid intermediate rails,
adjustment. Meeting stiles at pairs of doors shall each have adjustable two
welded in place to form various grid patterns are available and provide the
piece nosing and stile, one of which shall have two continuous weather piles
strength and flexibility not available from surface applied or internal muntins.
for maximum weathering between doors.
Doors (without intermediate rails) shall be equipped with top rail adjustment A full line of custom, Designer Series entrance doors is also available.
screws for minor field adjustments after installation. All fasteners for push
and pull hardware shall be stainless steel. Butt hinges shall be full mortise,
non-ferrous ball bearing hinges.
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 5.
NARROW STILE ENTRANCE DOORS
D D
A A A B A
Rev.
F F F F
Center Hung Center Hung Center Hung
E E
2 1/16" 2 1/16"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
6. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
NARROW STILE ENTRANCE DOORS
2 3/4"
41- 008
41- 012
TOP RAIL F
1 3/4"
1/8"
2 1/8" 1"
41- 008
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 7.
3 1/2" MEDIUM STILE DOOR
D D
1 3/4"
A A A B A
Rev.
F F F F
Center Center Hung Center
Hung Hung
41- 014
E E
6 13/16"
3 1/2"
41- 359 E
A
1 3/4"
HINGE STILE
41-161
41- 359
1 3/4" A
LOCK STILE
41-161
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
8. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
3 1/2" MEDIUM STILE DOOR
3 7/16"
41- 002 (Adjustable)
41- 358
41- 013
F
TOP RAIL
1 3/4"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 9.
5" WIDE STILE DOOR
D D
A A A B A
Rev.
F F F F
Center Hung Center Hung Center Hung
E E
5"
41- 509
A
1 3/4"
HINGE STILE
41- 161
5"
41- 509
A
1 3/4"
LOCK STILE
41- 161
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
10. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
5" WIDE STILE DOOR
41- 508
6 13/16"
41- 014
5"
E
D
41- 015
TOP RAIL
BOTTOM RAIL
1 3/4"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 11.
C.O.C CONDITIONS
Transom
22- 842T Condition
for 1/4" Glazing
45- OHF
5"
TOP RAIL
41- 015
22-620T SASH
Transom Condition
for 1" Glazing
1 3/4"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
12. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
DECO-PANEL
A A
1 3/4" 1 3/4"
41- 045
10" C 10" D
41-009 41-009
narrow stile narrow stile
41-359 or 41-359 or
medium stile medium stile
41-509 41-509
wide stile wide stile
A A
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 13.
INTERMEDIATE DOOR RAILS
CAN ALSO BE USED AS VERTICAL RAILS
1 3/4" 1 3/4"
41- 161
41- 030
2" INTERMEDIATE
RAIL FOR
NARROW STILE 1 3/4"
DOOR
41- 045
4 1/2" INTERMEDIATE
RAIL FOR
WIDE STILE
41- 035 DOOR
3" INTERMEDIATE
RAIL FOR
MEDIUM STILE
DOOR
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
14. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
INTERMEDIATE
DOOR RAILS
CAN ALSO BE USED AS
VERTICAL RAILS
1 3/4"
41- 020
5" x 1-3/4"
OR WIDE STILE
DOOR
41- 020
1/2"
10" 10"
41- 010 41- 010 1/2"
41- 020
41- 014
7 9/16"
1/2 SIZE
E
DETAIL
BOTTOM RAIL
41- 011
41- 020
1/2"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 15.
KICKPLATES
1 3/4"
1/2"
41- 030
A
INTERMEDIATE
1/2" REVEAL
RAIL
AROUND KICKPLATE ON
NARROW, MEDIUM AND
WIDE STILE DOORS
ALUMINUM
KICKPLATE
up to 36" high,
and .080" or
.125" thick.
1/2"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
16. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
ALTERNATE GLAZING BEADS
41-161
41-165
41-161
41-161
1/4" Glass 5/8" Glass
41-265G
41-265F
41-165
41-165
1" Glass
1" Glass
DOOR GRIDS
GRID CONSTRUCTION
1/2" Glazing
Bead
3/8"
Intermediate
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 17.
COLONIAL DOORS
D
A H A A B A
rev.
E
41- 014
D
6 13/16"
3 7/16"
BOTTOM RAIL
1 3/4"
41- 500 H
41- 161
3/8"
41- 020
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
18. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
COLONIAL DOORS
3 1/2"
41- 359
A
1 3/4"
HINGE STILE
41-161
3 1/2"
41- 359
A
1 3/4"
LOCK STILE
41-161
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 19.
1/4" OR 1" PANEL DOORS
ALTERNATE GLAZING BEADS ALLOWS FOR GLAZING OF 1/4", 5/8" OR 1"
A A
G
F B
2 1/16" 2 1/16"
41-009 41-009
A A
1 3/4"
HINGE STILE LOCK STILE
WITH WITH
1/4" PANEL 41-161 41-161 1/4" GLAZING
B B
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
20. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
1/4" AND 1" PANELS
TOP RAIL
2"
D
41- 030
2 3/4"
41- 012
WITH 1/4" F
PANEL INTERMEDIATE
RAIL
1 3/4"
41- 161
41-165
41-165
41- 013
WITH 1/4"
PANEL
41- 030
WITH 1"
PANEL
2" 3 7/16" BOTTOM RAIL
G
INTERMEDIATE
RAIL
E
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 21.
1-1/2" PANEL
ALTERNATE GLAZING BEADS ALLOWS FOR GLAZING OF 1/4", 5/8" OR 1"
D
H
A C J
G
A
A B F
2 1/16" 2 1/8"
41-165
41-500
41- 002 (Adjustable)
41- 008
41- 008
WITH
1-1/2"
PANEL
B B
41- 009
F
HINGE STILE
WITH
1-1/2" PANEL
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
22. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
1-1/2" PANEL
D
41-161
2 3/4"
41- 020 41- 012
WITH
41- 500 1-1/2"
PANEL
3/8"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 23.
D F
B A
E
BOTTOM RAIL
TOP RAIL
25 PSI.
POLYSTYRENE
E D
3/8" TIE ROD
THRU SPLINE
11/2" 6"
11/2" 6"
OPTIONAL
.063" 3/8"
SMOOTH SECONDARY
ALUMINUM TIE ROD .063" SMOOTH
FACE SHEETS ALUMINUM
FACE SHEETS
1/8" CLOSER
REINFORCEMENT
OPTIONAL 3/8"
SECONDARY
TIE ROD
2 3/8"
.450 TWIN
FELTFUZZY
3/8" TIE ROD
THRU SPLINE
25 PSI. POLYSTYRENE
3/16"
1/4"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
24. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
FULL ALUMINUM FLUSH DOORS
SIDE RAILS
.063 SMOOTH
DOOR FRAME ALUMINUM FACE SHEETS
REPLACEABLE BEVELED 25 PSI. POLYSTYRENE
EDGE TRIM
11/32"
FOR GEAR HINGE
.063 SMOOTH
ALUMINUM FACE SHEETS
25 PSI. POLYSTYRENE
35/8"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 25.
FULL FLUSH DOORS
3 5/8"
CLOSEUP
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
26. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
FULL FLUSH DOORS
25 PSI. POLYSTYRENE
3 5/8"
25 PSI. POLYSTYRENE
INACTIVE LEAF .063 SMOOTH ALUMINUM FACE SHEETS
PARALLEL
BEVELED
B LOCK EDGES
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 27.
D F
B A
BOTTOM RAIL
G
25 PSI. E
POLYSTYRENE
TOP RAIL
.120 FIBERGLASS
RESIN PANELS
with UV INHIBITORS
11/2" 6"
11/2" 6"
OPTIONAL
3/8"
SECONDARY
TIE ROD
1/8" CLOSER
REINFORCEMENT
OPTIONAL 3/8"
SECONDARY
TIE ROD
23/8"
.450 TWIN
FELT FUZZY
3/8" TIE ROD
THRU SPLINE
25 PSI. POLYSTYRENE
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
28. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
FRP ENTRANCE V-350
11/32"
FOR GEAR HINGE
.120 FIBERGLASS RESIN PANELS
with UV INHIBITORS
25 PSI.
POLYSTYRENE
35/8"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 29.
FRP ENTRANCE V-350
3 5/8"
PARALLEL
BEVELED
B
LOCK EDGES
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
30. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
FRP ENTRANCE V-350
25 PSI. POLYSTYRENE
REPLACEABLE .120 FIBERGLASS RESIN
BULL NOSE TRIM PANELS with UV INHIBITORS
3 5/8"
CLOSEUP
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 31.
D F
B A
BOTTOM RAIL
G
D
OPTIONAL 3/8"
SECONDARY
TIE ROD
11/2" 6"
1/8" CLOSER
REINFORCEMENT
23/8"
.450 TWIN
FELT FUZZY
11/32"
FOR GEAR HINGE
.120 FIBERGLASS RESIN PANELS
with UV INHIBITORS
25 PSI. POLYSTYRENE
5 3/4"
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 33.
FRP ENTRANCE V-600
25 PSI. POLYSTYRENE
REPLACEABLE .120 FIBERGLASS RESIN PANELS
BULL NOSE TRIM with UV INHIBITORS
5 3/4"
CLOSEUP
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
34. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
FRP ENTRANCE V-600
5 3/4"
25 PSI. POLYSTYRENE
.120 FIBERGLASS RESIN PANELS
INACTIVE LEAF with UV INHIBITORS
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 35.
VISION LITES FOR FRP and FULL FLUSH DOORS
25 PSI. 25 PSI.
POLYSTYRENE POLYSTYRENE
VISION LITE
.120 FIBERGLASS MOLDINGS .120 FIBERGLASS
RESIN PANELS RESIN PANELS
with UV INHIBITORS with UV INHIBITORS
1/4" GLASS
25 PSI. 25 PSI.
POLYSTYRENE POLYSTYRENE
VISION LITE
.120 FIBERGLASS MOLDINGS .120 FIBERGLASS
RESIN PANELS RESIN PANELS
with UV INHIBITORS with UV INHIBITORS
1" GLASS
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
36. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
DOORS WITH LOUVERS
D
TOP RAIL
D
A C
G 2 3/4"
41- 012
WITH
1-1/2" G
H PANEL 41-110
41-009
A
HINGE STILE
WITH 28 - 400
16'0" Louver
1-1/2" PANEL Extrusion
1-1/2" Deep
41-500
41-110
41-009 H
C
LOCK STILE
WITH
1-1/2" PANEL
41-500
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 37.
DOOR STOPS AND FILLERS
1-1/2"
T 451- PF
Pocket Filler T 450 - PF
Pocket Filler
42 - 017
2"
T 451- DS
Snap-in Door Stop T 450 - DS
Snap-in Door Stop
42 - 018
2"
T 451- PR
Pocket Reducer
42 - 019
SASH
1/4"
22 - 842 T
22 - 620T
1/4"
22 - 841
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
38. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
E H
F I
OFFSET DOOR
A B B C D SHOWN
WITH OPEN BACK
TUBE FRAMING
G or Alt.G J
A B B C D
NARROW STILE
DOOR SHOWN
H
E
F
I
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 39.
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
E N
F O N
A B K L M
O
G or Alt. G P
Optional
Corner
P
Alt. G
K L M
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
40. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
E H
F I
OFFSET DOOR
A B B C D SHOWN
WITH CLOSED BACK
TUBE FRAMING
G or Alt.G J
A B B C D
NARROW STILE
DOOR SHOWN
H
E
F
I
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 41.
1-3/4" x 4-1/2" FLUSH GLAZING FOR 1/4" GLASS
E N
F O N
A B K L M
G or Alt.G P
Optional
Corner
P
Alt. G
K L M
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
42. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASS
CENTER HUNG DOOR SHOWN WITH CONCEALED OVERHEAD CLOSER & OPEN BACK TUBE FRAMING
E N
F O
N
A B K L M
Optional
Corner
G P O
E
Alt. G
P
F
A B
G
L M
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 43.
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASS
CENTER HUNG DOOR SHOWN WITH CONCEALED OVERHEAD CLOSER & CLOSED BACK TUBE FRAMING
Optional N
Corner
Alt. G
A B
F P
L M
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
44. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
2" x 4-1/2" FLUSH GLAZING FOR 1" GLASS
SHOWN IN THERMAL BREAK VERSION WITH OFFSET DOOR
E H
F I
Optional
Corner
A B B C D
G J
A B B C D
NARROW STILE
DOOR SHOWN
H
E
I
F
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 45.
THRESHOLDS
4" x 1/2"
62-040
4-1/2" x 1/2"
62-058W
5" x 1/2"
62-050
62-057 - P
Panic Thresholds
62-060
7" x 1/2"
62-070
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
46. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 11/2015
HARDWARE - PUSH/PULLS
64-102
Push Bar As-
sembly
64-103
Standard Pull Handle
12" Long – 10-3/8" C/L
64-189
Push/Pull Combo
(Push/Push only, available).
(Pull/Pull only, available).
64-126
Crash Bars
64-110
"V" Wire Pull Handle
Shown above is Rebco's
(special order)
standard hardware.
Custom hardware is
available on request.
64-106
Hallet Pull
(special order)
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 47.
HARDWARE - PIVOTS, BUTTS
64-340 64-341
Offset Pivots Intermediate Pivot
64-346
Center Hung Top Pivot – Frame Portion
"Walking Beam"
64-344
Center Hung 64-345
Bottom Pivot Set Center Hung Top Pivot – Door Portion
Door & Threshold Portion Channel with Bushing
64-384
Full Surface Continuous Hinge
64-381
Frame Leaf Butt Hinge
64-384FM
Full Mortised Continuous Hinge
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
48. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
HARDWARE - CLOSERS
Mounting
Mounting
Clips
Clips
Offset Arm
End Load Arm
Slide Channel
Parallel Arm
Surface Mounted
Closer
with Regular Arm
Drop Plate H.O. available upon request
For Easy Mounting of Surface Mounted Closer on Door Frame
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 49.
HARDWARE - CYLINDERS & FLUSH BOLTS
BEST
64-324 64-BWC
Solid Brass Rim Cylinder (With Construction Core)
Best Mortise Cylinder (special order)
MISCELLANEOUS
41-100
Finger Guard
64-450 64-460
Drop Arm Door Holder Mail Slot
RE B CO
INCORPORATED
TOUCH UP SPRAY
"DURO"
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
50. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
HARDWARE - LATCH LOCKS, HANDLES
64-301 64-303 64-307 64-308
Adams Rite Maximum M.S. + 1890 Adams Rite Latch Lock
ADAMS RITE MFG. CO.
Security Lock ADAMS RITE MFG. CO.
Hook Lock & ADAMS RITE MFG. CO.
Short (Handed)
Latch Lock Throw Lock
ADAMS
RITE MF
G. CO.
64-TSU
ADAMS
RITE MFG
. CO. ADAMS RITE MFG. CO. Deadbolt/Latch
Combo, MS1890 Lock,
Cylinder, T-Turn, and
Lever Both Sides
64-314
Adams Rite
Electric
Release
64-312
Push or Pull Paddle
CO.
MFG.
S RITE
ADAM
64-313R
Retro-fit Strike
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 51.
GLAZING BEADS & WEATHERSTRIP PILES
42 - 258A 42 - 258
Used with 41 - 161 Door Stop Used with 42 - 017, 41 - 165 and 41-265
Comes in black or white
ASTRAGALS
41- 002
41-008 41-008
narrow stile narrow stile
41-358 or 41-358 or
medium stile medium stile
41-508 41-508
wide stile wide stile
41-050
Optional Security Astragal
for Pair of Doors
41-008
narrow stile
41-358 or
medium stile
41-508
JAMB wide stile
41-051
Optional Security Astragal
for Single Door
1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248 Rebco’s in Front!!!
52. Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 © 9/2015
HARDWARE - PANICS & EXIT DEVICES
Series 8800
Rim Device
ADAMS
RITE MF
G. CO.
Rebco’s in Front!!! 1171 - 1225 Madison Avenue, P.O. Box 2248, Paterson, NJ 07509 - 2248
© 9/2015 Outside NY/NJ 800 - 777 - 0787 • NJ 973-684 - 0200 • NY 212 - 736 - 6435 • FAX 973- 684 - 0118 53.
Other Fine REBCO Products
Whatever your needs, from narrow stile to
FRP doors or entrances – hoppers, vents,
casement and fixed windows – storefront
systems – sheets or panels – angles, bars
– channels or stock lengths, REBCO offers
the products you need to meet
your specifications.
Window
Systems
REBCO stocks the largest selection of architectural aluminum shapes in the New York
Metropolitan area, and serves the glass industry from coast to coast!
Storefront Systems
We carry a complete line of storefront extrusions from pressure wall, seamless
mullion and flush glaze systems down to division bars, sash, and bar stock –
all available in a variety of finishes. We work with custom color application experts
to match existing building trims and are adept at matching logo colors and un-
usual colorations. But don’t be fooled by the pretty face. Behind each facade is a
well constructed enclosure.
Rebco’s in Front!!!