0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
27 visualizzazioni2 pagine
1. The SOP outlines steps to address wheel wobbling issues, including checking tire pressure, wheel bearings, tire bead irregularities, wheel runout, spoke tightness, fork nuts, and shock absorber height.
2. Specific checks include verifying front and rear tire pressures are at 22 psi and 32 psi respectively, and inspecting wheel free rotation and tire bead lines.
3. Additional troubleshooting involves checking wheel runout and dynamic imbalance, fork nut tightness, swing arm bushings, and shock absorber stiffness.
1. The SOP outlines steps to address wheel wobbling issues, including checking tire pressure, wheel bearings, tire bead irregularities, wheel runout, spoke tightness, fork nuts, and shock absorber height.
2. Specific checks include verifying front and rear tire pressures are at 22 psi and 32 psi respectively, and inspecting wheel free rotation and tire bead lines.
3. Additional troubleshooting involves checking wheel runout and dynamic imbalance, fork nut tightness, swing arm bushings, and shock absorber stiffness.
1. The SOP outlines steps to address wheel wobbling issues, including checking tire pressure, wheel bearings, tire bead irregularities, wheel runout, spoke tightness, fork nuts, and shock absorber height.
2. Specific checks include verifying front and rear tire pressures are at 22 psi and 32 psi respectively, and inspecting wheel free rotation and tire bead lines.
3. Additional troubleshooting involves checking wheel runout and dynamic imbalance, fork nut tightness, swing arm bushings, and shock absorber stiffness.
RE Technical Support - Service of oval appr en writt the out Wheel Wobbling or Shimmy with ne 1. Front and Rear tyre pressure to be checked - 22 psi / 32 psi respectively. anyo 2. Check Wheel Free Rotation – If not free suspect wheel bearings. 3. Check for Tyre line beading Irregularity – Release air pressure and adjust by ed copi 4. Check Wheel Run out & Adjust or 5. Dynamic Imbalance of wheel to be checked by ensuring spokes tightness appropriately d to 6. Check Fork Nut for Looseness cate 7. Check Swing Arm Bush if worn out replace 8. Adjust Shock Absorber height for Stiffness muni com be not shall It eld. Enfi al Roy of erty prop the t is men docu This This docu men t is the prop erty of Roy al Enfi eld. It shall not be com muni cate d to or copi ed by anyo ne with out the writt en appr oval of Technical Support - Service RE SOP No: 12 Wheel Wobbling Standard Operating Procedure