Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
V300R017C00
License Application Guide
Issue 1.0
Date 2016-06-28
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
GENEX Probe & Assistant V300R017C00 License Application
Guide Applying for a Non-Commercial License
Author
Prepared By Liu Zhaoxin Date 2016-06-26
Change History
Issue Description Date Prepared By Approved By
1.0 This is the first release. 2016-06-28 Liu Zhaoxin Dong Wei
Contents
7 FAQ................................................................................................................................................24
8 Reference Document....................................................................................................................25
1 Overview
This document describes how to apply for a license of GENEX Probe and Assistant
V300R017C00 or a later version.
Table 1.1 lists the license control items of GENEX Probe V300R017C00, and Table 1.2
provides the configuration items of these license control items. Table 1.1 lists the license
control items of GENEX Assistant V300R015C00, and Table 1.2 provides the configuration
items of these license control items.
Table 1.2 Configuration items of the license control items of GENEX Probe
V300R017C00
No. BOM Description
Code
Table 1.4 Configuration items of the license control items of GENEX Assistant
V300R015C00
No. BOM Description
Code
This chapter describes how to obtain the ESN before applying for a license of GENEX Probe
and Assistant V300R017C00.
9. Choose Help > License Info and get "Lock ID" (Only applicable to Sentinel SuperPro)
The process for applying for a commercial license consists of four parts: master process,
supplementary process, exception process, and prohibition clauses.
The license application procedure varies with scenarios. For details, see the following
attached documents.
To perform MS-MS speech quality evaluation tests on the Probe, you must apply for a
License including the speech quality evaluation module by following the instructions
provided in section 4.1.2"Application (Including the Speech Quality Evaluation Module)."
To perform MS/UE-PSTN speech quality evaluation tests on the Probe, you must apply for a
License including the speech quality evaluation module by following the instructions
provided in section 4.1.2" GENEX SQE Server Speech Quality Evaluation Module License."
(6) Regional Division: indicates the region where the applicant is located. This item must be
set.
(7) Apply type: indicates the application type.
(8) Network System: indicates the network system. You can select one or multiple network
systems.
(9) Project: indicates the project. You must manually specify it.
(10) Country: indicates the country.
(11) Approver: indicates the direct supervisor.
(12) Genex representative: indicates the PDU director. It is a system configuration item. (the
GENEX representative should handle the application within three working days. In case of
emergency, contact the corresponding secretary to notify of the GENEX representative.)
(13) Application Reason: indicates the application reason.
ASSISTANT_V3R17 V300R017
(17) ESN Code: indicates the electronic serial number (ESN) code. Note that the ESN code
must be filled in completely.
(18) Lock ID: For the license edition, fill the ESN code in Lock ID. For the dongle edition,
fill in four digits, four letters or combination of digits and letters. For details, see chapter
2"Obtaining the ESN."
(19) Notes Address: indicates the notes address of the applicant.
If the employee ID is a five-digit number, fill in 5-digit number@notesmail.huawei.com
directly.
If the employee ID is a six-digit number, prefix 00 before the employee ID, that is, 8-digit
number@notesmail.huawei.com
Note that only Huawei engineers can apply for the license.
(20) E-mail Address: indicates the email address. Only Huawei email addresses are
supported.
(21) Application duration(days): indicates the validity period of the newly applied license.
The filled value must be digits. For example, the longest validity period of the dongle edition
is 365 days and the longest validity period of the license edition is 180 days.
----End
Speech Quality Evaluation Module License is suit for three test items in Probe as below:
Sync SQE(MS-MS)、Async SQE(MS-MS)、SQE(MS-PSTN/ISDN)
To perform MS/UE-PSTN speech quality evaluation tests, you must apply for License for
GENEX SQE Server(see chapter4.3).
1. Submit an internal demand contract electronic workflow to apply for the PESQ and POLQA
algorithm algorithm License.
http://w3.huawei.com/dominoapp/fin/fixedasset/interfixedasset.nsf/fmDatabase?ReadForm
The MOS test module in the Probe and Assistant uses the PESQ and POLQA algorithm of
Psytechnics.
PESQ BOM code: 05330178 Predicted unit price: $1250 per License
POLQA BOM code: 05330930 Predicted unit price: €2000 per License
If users want to use the POLQA algorithm, after the e-Flow of Inter-Company Fixed Asset
Application is submitted, an email from the agent will be received. In the email, the person
managing OPTICOM accounts is mentioned. Contact the person to obtain the POLQA
algorithm license.
2. After the PESQ or POLQA algorithm algorithm License being applied, please apply for Probe
License as chapter4.1.1. Please give the contact number of applying for PESQ or POLQA
algorithm License in Remark.
3. If PESQ algorithm algorithm License, please update Probe License as introduction.
If POLQA algorithm algorithm License, please update POLQA License after updating Probe
License.
To perform MS/UE-PSTN or MS-MS speech quality evaluation tests on the Probe, you must apply for a
license including the speech quality evaluation module by following the instructions provided in section
4.2.2"Application (Including the Speech Quality Evaluation Module)."
Note:
Type:
Speech Quality Evaluation Module License is suit for three test items in Probe as below:
Sync SQE(MS-MS)、Async SQE(MS-MS)、SQE(MS-PSTN/ISDN)
To perform MS/UE-PSTN speech quality evaluation tests, you must apply for License for
GENEX SQE Server(see chapter4.3)..
1. Submit an internal demand contract electronic workflow to apply for the PESQ and POLQA
algorithm algorithm License.
http://w3.huawei.com/dominoapp/fin/fixedasset/interfixedasset.nsf/fmDatabase?ReadForm
The MOS test module in the Probe and Assistant uses the PESQ and POLQA algorithm of
Psytechnics.
PESQ BOM code: 05330178 Predicted unit price: $1250 per License
POLQA BOM code: 05330930 Predicted unit price: €2000 per License
If users want to use the POLQA algorithm, after the e-Flow of Inter-Company Fixed Asset
Application is submitted, an email from the agent will be received. In the email, the person
managing OPTICOM accounts is mentioned. Contact the person to obtain the POLQA
algorithm license.
2. If the non-commercial License application permission is not applied, apply for the non-
commercial License platform permission by following the instructions provided in Error:
Reference source not found"Error: Reference source not found."
If you have obtained the permission or already have the permission, click the following link
directly:
http://License/huawei/login.do
Login account: employee W3 account
After the login, select Download Commissioning License in the left pane, as shown in the
following figure:
Type:
Fill in the application reason, as shown in the following figure. Ensure that the contract
number of the license for which the PESQ or POLQA algorithm is purchased is filled in.
After the submission is complete, you can view the approver in the electronic workflow.
Capture a screenshot of the application contract electronic workflow and send it to the
approver by email.
3. If PESQ algorithm algorithm License, it had be intergrated in Probe License. And please
update Probe License as introduction.
If POLQA algorithm algorithm License, please update POLQA License after updating Probe
License.
2 License
Module
Description
License control in the Probe is available only during tests with external terminals being
connected and does not take effect when users replay or export data.
The following table lists the license modules of the Probe.
GSM/GPRS/EDGE Test
WCDMA test
HSPA/HSPA+ Test
TD-SCDMA Test
LTE FDD Test
LTE TDD Test
CW Test
Voice Quality Estimation Test
Module Evaluation
PSTN Speech Quality
Evaluation test
Basic Function-GSM/GPRS/EDGE
Basic Function-WCDMA
Basic Function-HSPA/HSPA+
Basic Function-WLAN
Basic Function-TD-SCDMA
Basic Function-LTE FDD
Basic Function-LTE TDD
GSM Theme Analysis
WCDMA Theme Analysis
Basic Function-GSM/GPRS/EDGE
LTE FDD Theme Analysis
LTE TDD Theme Analysis
Theme Report
Except the CW Test and MOS Speech Quality Evaluation modules, other modules are
distinguished by RAT and a module controls terminal and data display for the corresponding
RAT. The CW Test module controls CW test items of scanners, and the MOS Speech Quality
Evaluation module controls MOS test items. TD-SCDMA module license is not independent
control terminal. PSTN is a product launch bundled voice testing tools.
Generally, it is recommended to apply for all license modules except the MOS Speech Quality
Evaluation module (which can be applied for if when necessary).
If a module is not applied during license application, it is not displayed in License Info. The
module in Invalid state in License Info is no longer used in the Probe or Assistant and is
incorrectly selected during license generation. The license can be properly used.
3 Related
Terms
5 FAQ
1. Q: After the software is started, why is the following dialog box displayed and no ESN is
available?
A: This problem occurs when the dongle is not identified properly or the dongle is not
inserted into the USB port on the PC. Insert the dongle into the USB port on the PC if
the dongle is not inserted.
2. Q: Can the licenses of the Probe and the Assistant share one dongle?
A: The Probe and the Assistant are independent from each other, and you need to apply
for their respective licenses.
Then, use the Probe and the Assistant to update the license files for the Probe and the
Assistant into the dongle, respectively, to enable the Probe and the Assistant to share one
dongle.
3. Q: Why is the Wibu dongle not identified by the HuaWei’PC installed SPES and CPM?
A: SPES and CPM disabled the Wibu Dongle.It is recommended that HuaWei enginern
use software license instead and Non-HuaWei engineer use Non-HuaWei PC.
6 Ref
erence Document