Scribd Logo
Carica

Benvenuto in Scribd!

  • NT Bosch Me7.4.6 Psa 1033

    Caricato da

    Rafael Fávaro
    226 visualizzazioni3 pagine
    This document provides instructions for connecting the NEW TRASDATA device directly to the vehicle ECU using cable F32GN037C. It specifies connecting the grey wire of the cable as shown in a picture for boot connection to the ECU connector in order to read parameters from the Bosch ME7.4.6 engine control unit. Basic steps include making sure the NEW TRASDATA power LED is on before establishing the direct connection to access the ECU.

    Descrizione originale:

    d

    Titolo originale

    NT_BOSCH_ME7.4.6_PSA_1033

    Copyright

    © © All Rights Reserved

    Formati disponibili

    PDF, TXT o leggi online da Scribd

    Hai trovato utile questo documento?

    Questo contenuto è inappropriato?

    Segnala questo documento
    This document provides instructions for connecting the NEW TRASDATA device directly to the vehicle ECU using cable F32GN037C. It specifies connecting the grey wire of the cable as shown in a picture for boot connection to the ECU connector in order to read parameters from the Bosch ME7.4.6 engine control unit. Basic steps include making sure the NEW TRASDATA power LED is on before establishing the direct connection to access the ECU.

    Copyright:

    © All Rights Reserved
    Scarica in formato PDF, TXT o leggi online su Scribd
    Segnala contenuti inappropriati
    226 visualizzazioni3 pagine

    NT Bosch Me7.4.6 Psa 1033

    Caricato da

    Rafael Fávaro
    This document provides instructions for connecting the NEW TRASDATA device directly to the vehicle ECU using cable F32GN037C. It specifies connecting the grey wire of the cable as shown in a picture for boot connection to the ECU connector in order to read parameters from the Bosch ME7.4.6 engine control unit. Basic steps include making sure the NEW TRASDATA power LED is on before establishing the direct connection to access the ECU.

    Copyright:

    © All Rights Reserved
    Scarica in formato PDF, TXT o leggi online su Scribd
    Segnala contenuti inappropriati
    di 3

    NT_BOSCH_ME7.4.6_PSA VER 02.

    00

    PLUGIN 569 :NEW TRASDATA

    Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -1-
    NT_BOSCH_ME7.4.6_PSA VER 02.00

    DIRECT CONNECTION
    In order to connect to the ECU use the CABLE F32GN037C.
    Make sure that the POWER led (red) on NEW TRASDATA is ON.

    ECU CONNECTOR

    Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -2-
    NT_BOSCH_ME7.4.6_PSA VER 02.00

    BOOT CONNECTION

    Connect the GREY wire of the F32GN037C cable as shown in the following picture :

    Dimensione Sport srl –15020 Serralunga di Crea (AL) - Italy- Tel. +39014295201 – WEB : www.dimsport.com -3-

    Potrebbero piacerti anche