Sei sulla pagina 1di 4

HALLIBURTON

Pressure Pumping Technology

CE Marked Fracturing and Cementing Pumps


Halliburton Pumps that Meet the Requirements of Relevant European Directives

Halliburton provides a line of CE marked oil field pumps based The fluid end assemblies shown in Table 1 are approved for
™ ™
substantially on the design of the HT-400 and Grizzly pumps pumping stimulation fluids, cementing fluids, drilling fluids and
(Figure 1). water. Pressure and flow ratings of the approved fluid ends are
equal to the standard counterpart fluid ends.
The power end assembly of these pumps is built to the reliability
standards of the power ends of the HT-400 and Grizzly pumps with When selecting a pump for equipment requiring CE marking, the
features added to be in compliance with the Machinery and ATEX most important factor is that the pump assembly must have a fluid
Directives, resulting in certification of this portion of the pumps. end assembly listed in the Design Examination Certificate. These
fluid end assemblies are listed in Table 2.
The primary area of focus was the pressure containing part of the
pump (the fluid end assembly). This part of the pump is specifically The second most important factor in choosing a pump assembly is
covered by Directive 97/23/EC of 29 May 1997 on Pressure that it uses a power end assembly that has been updated to add
Equipment (also known as the Pressure Equipment Directive). requirements of the Machinery Directive and ATEX. These power
end assemblies are listed in Table 3.
A new set of part numbers was created. These new parts were then
enhanced with approved materials and supporting engineering
documentation and calculations. The engineering documents and
Fluid end size Maximum pressure Maximum pressure
calculations were then compiled into a Technical Construction File.
(plunger diameter) psi MPa
This Technical Construction file was examined and approved by
Det Norske Veritas (DNV) which is acting as our notified body. 3 3/8 20000 137.9

On April 15, 2010, DNV issued to Halliburton a Design 4 15000* 103.4*

Examination Certificate-EC. The cover page of the document is 4 1/2 11200 77.2
shown as Figure 2. 5 9000 62.1

6 6250 43.1
Table 1—CE marked fluid end assemblies approved for pumping
stimulation fluids, cementing fluids, drilling fluids and water.

* For static pressure testing, such as testing lines, BOP stacks, etc., the 4-in. (10.160-cm)
fluid end is rated to 15,000 psi (103.421 MPa) maximum pressure.

45
73
L1
HA

Figure 1—The CE marked Halliburton oil field pumps are based



substantially on the design of selected HT-400 pumps (shown above)
that have been CE marked.
HALLIBURTON

Q: Have the fluid end parts been designed with approved


materials? Yes, Halliburton’s design of CE Marked fluid ends
utilizes approved materials.

Q: Were the fluid ends designed with supporting engineering


documentation and calculations for 3rd party approval?
Yes, Halliburton has designed their CE Marked fluid ends with
supporting engineering documentation and calculations.

Q: Was the engineering documentation and calculations


compiled into a Technical Construction File? Yes, Halliburton
compiled the engineering documentation and calculations into a
Technical Construction File.

Q: Was the Technical Construction File examined and


approved by a qualified notified body? Yes, the Technical
Construction File was examined and approved by DNV,
Halliburton’s notified body.
HAL33564

Q: Was Halliburton issued a Design Examination Certificate-EC


by DNV? Yes, Halliburton was issued a Design Examination
Figure 2—On April 15, 2010, DNV issued to Certificate-EC by DNV.
Halliburton a Design Examination Certificate-EC.
Special Manuals for CE Marked Pumps
101516016, CE Mark, HT-400 Stimulation Pump
CE Marking on a Product
According to DNV, the CE marking on a product is critical for 101575187, CE Mark, HQ-2000 Pump, Maintenance and
several reasons: Repair, Euro
• Indicates that the product can be legally sold within the
European Union (EU) and the European Free Trade
Area (EFTA).

• Ensures the product can move freely throughout the European


single market.

• Indicates to customers that the product meets minimum safety


standards and therefore has a minimum level of quality.

Frequently Asked Questions


Q:Do the fluid end assemblies meet the Pressure Equipment
Directive? Halliburton’s CE Marked fluid end assemblies in
Table 2 meet the these directives.

Q:Do the power end assemblies meets Machinery and ATEX


Directives? Halliburton’s CE Marked power ends in Table 3 meet
these directives.
HALLIBURTON

CE Marked (Euro) Fluid End Assemblies

Name Description

101542331 FLUID END ASSY, 3.375, HQ, EURO, RLUBE, CURVED LH, CENTER DISCHARGE, CURVED RH

101542334 FLUID END ASSY, 3.375, HQ, EURO, RLUBE, STR, CENTER DISCHARGE, CURVED RH

101527611 FLUID END ASSY, 3.375, HT, EURO, RLUBE, CURVED LH, CURVED RH

101542376 FLUID END ASSY, 4.000, HQ, EURO, RLUBE, CURVED LH, CENTER DISCHARGE, CURVED RH

101632086 FLUID END ASSY, 4.000, HQ, EURO, RLUBE, STR, CENTER DISCHARGE, THK BLANK

FLUID END ASSY, 4.000, HQ, EURO, RLUBE, STR, CENTER TUBE, STR EXT,
101542374
2 INCH 1502 FULL FLOW RISER IN NO. 5

101578432 FLUID END ASSY, 4.000, HT, EURO, PLUBE, CURVED LH, THK BLANK

101578422 FLUID END ASSY, 4.000, HT, EURO, PLUBE, THK BLANK, CURVED RH

101531365 FLUID END ASSY, 4.000, HT, EURO, RLUBE, CURVED LH, CURVED RH

101577758 FLUID END ASSY, 4.500, HQ, EURO, PLUBE, STR, CENTER DISCHARGE, THK BLANK

101542378 FLUID END ASSY, 4.500, HQ, EURO, RLUBE, CURVED LH, CENTER DISCHARGE, CURVED RH

FLUID END ASSY, 4.500, HQ, EURO, RLUBE, STR, CENTER TUBE, STR EXT,
101542377
2 INCH 1502 FULL FLOW RISER IN NO. 5

101578447 FLUID END ASSY, 4.500, HT, EURO, PLUBE, CURVED LH, THK BLANK

101578451 FLUID END ASSY, 4.500, HT, EURO, PLUBE, THK BLANK, CURVED RH

101494095 FLUID END ASSY, 4.500, HT, EURO, RLUBE, CURVED LH, CURVED RH

101542385 FLUID END ASSY, 5.000, HQ, EURO, RLUBE, CURVED LH, CENTER DISCHARGE, CURVED RH

FLUID END ASSY, 5.000, HQ, EURO, RLUBE, STR, CENTER TUBE, STR,
101542384
2 INCH 1502 FULL FLOW RISER IN NO. 5

101578454 FLUID END ASSY, 5.000, HT, EURO, PLUBE, CURVED LH, STR

101532402 FLUID END ASSY, 5.000, HT, EURO, RLUBE, CURVED LH, CURVED RH

101542388 FLUID END ASSY, 6.000, HQ, EURO, RLUBE, CURVED LH, CENTER DISCHARGE, CURVED RH

FLUID END ASSY, 6.000, HQ, EURO, RLUBE, STR, CENTER TUBE, STR EXT,
101542387
2 INCH 1502 FULL FLOW RISER INCH NO. 5

101532362 FLUID END ASSY, 6.000, HT, EURO, RLUBE, CURVED LH, CURVED RH

Table 2—CE mark fluid end assemblies listed in the Design Examination Certificate.
HALLIBURTON

Self-Certified Power End Assemblies

Name Description

101548194 STOCKABLE POWER END ASSEMBLY, GRIZZLY, L2, PLUBE, EURO

101575449 STOCKABLE POWER END ASSEMBLY, GRIZZLY, L2, EURO

101725151 STOCKABLE POWER END ASSEMBLY, BEARCAT 2, DRIVE SD, L2, EURO

101573836 STOCKABLE POWER END ASSEMBLY, BEARCAT 2, PASS SD, L2, EURO

101750493 STOCKABLE POWER END ASSEMBLY, GRIZZLY, L2, DBL FLG, 1880, EURO

101578603 STOCKABLE POWER END ASSEMBLY, HT-400, RH, 8.6, L4, NMT, TUTHILL, STD, SHX, EURO

101578590 STOCKABLE POWER END ASSEMBLY, HT-400, LH, 8.6, L4, NMT, TUTHILL, STD, SHX, EURO

101640811 STOCKABLE POWER END ASSEMBLY, HT-400, LH, 8.4, L4, NMT, TUTHILL, DOWN, SHX, EURO

101578609 STOCKABLE POWER END ASSEMBLY, HT-400, RH, 8.6, L4, NMT, TUTHILL, OUTBOARD, SHX, EURO

101578605 STOCKABLE POWER END ASSEMBLY, HT-400, LH, 8.6, L4, NMT, TUTHILL, OUTBOARD, SHX, EURO

101617453 STOCKABLE POWER END ASSEMBLY, HT-400, RH, 8.4, L4, NMT, TUTHILL, DOWN, SHX, EURO

101524143 STOCKABLE POWER END ASSEMBLY, HT-400, RH, 8.4, L2, PLUBE, EURO

101524142 STOCKABLE POWER END ASSEMBLY, HT-400, LH, 8.4, L2, PLUBE, EURO

Table 3—CE mark power end assemblies that have been updated to add requirements of the Machinery Directive and ATEX.

For more information on CE Marked Fracturing and Cementing Pumps,


please contact Dexer.Brunet@Halliburton.com or Vladimir.Yun@Halliburton.com.

© 2011 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the
contract between Halliburton and the customer that is applicable to the sale. H08313 03/11

www.halliburton.com

Potrebbero piacerti anche