(all dimensions in mm) APPLICATION: TEMPERATURE AND PRESSURE RESISTANT PERCUSSION INITIATOR FOR OILFIELD USE TEMPERATURE RESISTANCE: 250 °C / 1 h 480 °F / 1 h 230 °C / 10 h 445 °F / 10 h 200 °C / 30 h 390 °F / 30 h 150 °C / 50 h 300 °F / 50 h LONGER EXPOSURE POSSIBLE WITH HIGHER IMPACT ENERGIES PRESSURE RATING: *NOTES: MINIMUM PIN STROKE : 3mm (0.155”)* 140 MPa (20,305 psi) MAXIMUM PIN STROKE : 4mm (0.18”) SEALED BEFORE AND AFTER INITIATION MINIMUM FOIL DEFORMATION : 1,27mm (0.052”)* FIRING PIN CONFIGURATION: MAXIMUM FOIL DEFORMATION : 2,2mm (0.087”) 0.050” RADIUS, 60° POINT *THE STROKE VALUES ASSUME THAT ,BEFORE IMPACT,THE TIP OF THE PIN SITS AT THE SAME FIRING CHARACTERISTICS: HEIGHT AS THE UPPER FLAT SURFACE PLANE OF THE NO FIRE : BALL WEIGHT : 1,1 kg (2.4 pound) PERCUSSION INITIATOR.DIFFERENT FIRING HEADS DROP HEIGHT : 40 cm (15.75 ”) MAY HAVE DIFFERENT STROKE CONFIGURATIONS ALL FIRE : BALL WEIGHT : 1.1 kg (2.4 pound) BUT MAY STILL BE COMPATIBLE,PROVIDING THE FOIL DROP HEIGHT : 200 cm (78.7 ”) DEFORMATION IS WITHIN THE REQUIRED LIMITS. IN MIN IMPACT VELOCITY : 4,5 M/sec.(14.8 ft/sec) CASE OF QUESTIONS THIS SHOULD BE CLARIFIED FOR NON BREACHING APPLICATIONS: WITH DYNAENERGETICS PRIOR TO USE FOR PARTICULAR FIRING HEADS WHICH HAVE NOT BEEN QUALIFIED FIRING HEADS FOR USE WITH QUALIFIED BY DYNAENERGETICS DW NB PI: LRI TCP FH 1000 , INNICOR 4000,OWEN TC-010-1500-000,REFER TO NOTES AT* Packing Information Quantity per box 25 pcs INITIATION GAP: .. IGNITES HMX BOOSTER AT 25 mm (1.00 ”) GAP Gross weight per box 23.0 kg IGNITES HNS BOOSTER AT 20 mm (0.80 ”) GAP Net weight per box 1.9 kg EXPLOSIVES: PbN6 86 mg 1327 grains NEC per box 0.13 kg HNS 300 mg 4629 grains SHELF LIFE: Dimensions of box 33 x 32 x 23 cm 5 YEARS AT STORAGE CONDITION: + 5 °C TO + 30 °C + 41 °F TO + 86 °F MAX. 65% RELATIVE HUMIDITY, GOOD Product weight 76 g VENTILATION, WHEN SEALED IN VACUUM BAG Checked by: Approved by: Package Type Steel Case TD Z 1305 Revision: RP08032BE www.dynaenergetics.com dynawell@dynaenergetics.com Tel.: +49 (0)5102 6757 0 DYNAenergetics GmbH & Co. KG warrants only title to the equipment, products, materials and supplies and that the same are free from defects in workmanship and materials. There are no warranties, expressed or implied, of merchantability fitness or otherwise, which extend beyond those stated in the immediately preceding sentence. DYNAenergetics liability and Customer's remedy in any case of action arising out of the sale or use of any equipment, products, materials and supplies is expressly limited to the replacement of such equipment, products, materials and supplies on their return to DYNAenergetics or, at DYNAenergetics option, to the allowance to the Customer of credit for the cost of such items. In no event shall DYNAenergetics be liable for special, incidental, punitive or consequential damages.