Sei sulla pagina 1di 2

LTE DT Trouble Shooting Guideline Internal Open

LTE DT Trouble Shooting Guideline

If some KPI after swap is worse than before swap, please refer to
the corresponding case to do trouble shooting.
Case No. Case Name Root Cause Choice
1.Laptop TCP Setting
2.TEMS Investigation Bug: Often stop working
3.UE Performance: Low Throughput
4.Test Route and Direction not same as Before Swap
5.Without External Antenna or only 1 antenna
1 Throughput 6.Test Time: Busy hour, PDSCH PRB Usage of Test UE is low
7.Discovery Distance Binning should use 5 meters
8.FTP Server Trouble
9.E-Tilt not same as Before Swap, Overshooting
10.ZTE not Swapped site, Swapped Site disconnect, New Site on Air
11.Others
1.TEMS Investigation Ping Sequence: should use 32Byte
2.Smart PreScheduler Feature should be switched on
2 Ping
3.Test Route and Direction not same as Before Swap
4.Others
1.Test Route and Direction not same as Before Swap
Attach Success
3 2.Weak Coverage: Low RSRP or low SINR
Rate
3.Others
1.Test Route and Direction not same as Before Swap
Call Setup
4 2.Weak Coverage: Low RSRP or low SINR
Success Rate
3.Others
1.Test Route and Direction not same as Before Swap
2.Neighbor Cell Missed
5 Call Drop Rate
3.Weak Coverage: Low RSRP or low SINR
4.Others
1.Test Route and Direction not same as Before Swap
Idle to Active 2. UE Performance: Long Delay
6
Transition Time 3.Weak Coverage: Low RSRP or low SINR
4.Others
1.Test Route and Direction not same as Before Swap
2.Neighbor Cell Missed
HO Success
7 3.Overshooting
Rate
4.Weak Coverage: Low RSRP or low SINR
5.Others
EPS Bearer 1.Test Route and Direction not same as Before Swap
8 Activation 2.Weak Coverage: Low RSRP or low SINR
Success Rate 3.Others
1.Test Route and Direction not same as Before Swap
2.Without External Antenna or only 1 antenna
3.Discovery Distance Binning should use 5 meters
9 SINR 4.E-Tilt not same as Before Swap, Overshooting
5.ZTE not Swapped site, Swapped Site disconnect, New Site on Air
6.Test Time: Busy hour, High Load in Neighbor cells
7.Others
10 RSRP 1.Test Route and Direction not same as Before Swap
2.Without External Antenna or only 1 antenna
3.Discovery Distance Binning should use 5 meters

1
LTE DT Trouble Shooting Guideline Internal Open

4.E-Tilt not same as Before Swap, Overshooting


5.ZTE not Swapped site, Swapped Site disconnect, New Site on Air
6.Others

Test Log
Test items Optimization Target Case No.
Source
Average User Throughput>=29.5Mbps 1.Throughput
FTP DL Average User Throughput on cell edge (with
FTP DL 1.Throughput
Long Call probability 85%)>=5Mbps
Average User Throughput on cell edge (with
1.Throughput
probability 95%)>=4.25Mbps
Average User throughput>=10.5Mbps 1.Throughput
FTP UL Average User Throughput on cell edge (with
FTP UL 1.Throughput
Long Call probability 85%)>=0.5Mbps
Average User Throughput on cell edge (with
1.Throughput
probability 95%)>=0.42Mbps
Latency - Ping
Ping Average Ping Delay<=30ms 2.Ping
Round Trip Time

Attach Success Rate Short Call Attach Success Rate, % 3.Attach Success Rate

Packet switched Call 4. Call Setup Success


Short Call CSSR>=97%
Setup Success Rate Rate

Packet switched Call


Short Call CDR<=3% 5. Call Drop Rate
Drop Rate

Idle to Active 6. Idle to Active


Short Call Average transition<=100ms
Transition Time Transition Time
Intra-Frequency HO FTP DL
HO Success rate>=96% 7. HO Success Rate
Success Rate Long Call
EPS Bearer 8. EPS Bearer
Activation Short Call EPS Bearer Activation Success Rate>=96% Activation
Success Rate Success Rate
The (SINR>4dB)>=85% 9.SINR
Reference Symbol
FTP DL
Received Quality
Long Call The coverage (SINR average)>=3dB 9.SINR
Ratio

Reference Symbol Outdoor(RSRP>-120dBm)>=85% 10.RSRP


FTP DL
Received Power
Long Call Indoor(RSRP>-101dBm)>=75% 10.RSRP
(RSRP) Ratio

Potrebbero piacerti anche