Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LM-Instruments Oy
LM-Instruments • Handle selection
Diagnostics
Mirror handles • Explorers • Periodontal probes
11
Periodontics
Scalers • Universal curettes • Gracey curettes • Special instruments
17
Restoration
Excavators • Gingival margin trimmers • Spatula • Cord packers
• Carriers • Pluggers • Burnishers • Modelling instruments
• Composite instruments • Carvers • Excess removers • Filling remover
• Crown On / Off instruments • LM-Cello stripholder 31
Endodontics
Endodontic files • Explorer • Excavators • Pluggers • Surgery
45
Orthodontics
Ortho mirror handle • Ligature applicators • Arch Wire Tucker
51
Instrument sets 65
Special products
LM-MultiHolder • LM-CompoKnife • LM-ErgoHold
• LM-MultiSeptor • Brush Application Tips • Code rings 67
Index 74
entire product development and production process to achieve the best possible quality in all our products for
you to have the very best tools to work with. We deliver the highest of quality to guarantee your success in the
treatment results.
LM-Instruments combines
high-technology…
5
LM-DuraGradeMAX –
supersteel
the ultimate in metallurgy
The high wear resistance of the blade metal is one of the most significant features of a hand instrument. You can just
feel the comfort and efficiency while operating with sharp and resistant instruments. Resulting from the advanced
material technical research, the LM-DuraGradeMAX supersteel used in LM hand instruments represents the ultimate in
the field of metallurgy. According to independent research studies, the wear resistance of LM curettes is significantly
better than that of the comparative instruments – whether sharpened regularly or not sharpened at all. DuraGradeMAX
supersteel is now also in all the LM ultrasonic tips.
6
The pioneer in
ergonomics
How to define the ergonomics of a hand instrument? Firstly a non-slip and
natural grip on an instrument are essential. Secondly a lightweight and
optimised design prevent effectively occupational diseases. Thirdly a good
tactile sensitivity and easy handling of the instrument guarantee the best
clinical results. Reliability, wear resistance and comfort are the features that
will be evident for both, the dentist and the patient. These are the guiding
principals how Pekka Kangasniemi, DDS, one of the founders of LM,
defined instrument ergonomics already in the 1980s.
New DuraGradeMAX-steel
- extremely wear resistant
Exceptional polish
- outstanding corrosion resistance
Stylish colours and visible
product names
- easy identification
7
LM ultrasonic &
polishing technology
8
Choose synergy!
Select your instruments and work methods always according to the particular situation and anatomy of the tooth being treated.
The combination of hand instruments and ultrasonic technology enables more easier and effective procedures.
LM-Instruments is the first manufacturer in the world to offer high-quality tools for both manual and mechanical instrumentation.
An optimal combination guarantees the best possible treatment results.
9
Handle Selection
Most LM instruments are available with either LM-ErgoNorm or LM-ErgoMax handles. The thinner LM-ErgoNorm
handle functions best in light clinical procedures. The hand fit plays a role in selecting a handle type. By
interchanging ErgoNorm and ErgoMax handle types, the user’s hand is placed under even less strain.
All LM instrument handles are exceptionally ergonomic due to the elastic silicone coating and optimised
contouring.
ErgoNorm
ErgoMax
ErgoSingle
ErgoAccess
The instrument name and code number are imprinted on the handle. Other printed codes are e.g. the lines which
denote either blade size, angle curvature or measuring scale.
10
Diagnostics
- Mirror handles
- Explorers
- Periodontal probes
h
lt tto choose
Difficult ?
We recommend
LM-DiagnoSet!
See page 65.
Diagnostics Mirror handles, Explorers
Mirror handles
Mirror Handle
LM 25
- colour selection: red, grey, blue
Mirror Handle
LM 28 XSi
- available only with LM-ErgoMax (XSi)
handle
- cone socket design, UNF4-48, with
special threads
- colour selection: red, grey, blue
Explorers
For diagnosing calculus and caries and exploring of pockets, restorations and furcations.
Most explorers and periodontal probes are available also in single-ended designs.
Explorer
LM 5-8
Explorer
LM 5-9
12
Diagnostics
Explorers
Explorer, centered
LM 9-17C
Explorer
LM 17-23
Explorer, centered
LM 17C-23
Explorer
LM 3-6
Explorer
LM 11-12
- angles similar to Gra 11/12
13
Diagnostics Explorers, Explorers - Periodontal probes
Explorer, prosthetic
LM 18-19
- prosthetic crowns, bridges and
inlay-/onlay fillings
- high sensitivity at seams
Explorer, Holst
LM 29
- lateral angle on the shank
Explorer
LM 9
Most explorers and periodontal probes are available also in single-ended designs.
14
Diagnostics
Explorers - Periodontal probes
Williams Probe
LM 51
WHO Probe
LM 550B
- ball ø 0.5 mm
15
Diagnostics Furcation probes
Furcation probes
Nabers Probe
LM 20-21
Furcation Probe
LM 20B-21B
- examination of furcation lesions from different angles in both the upper and lower jaws
16
Periodontics
- Scalers
- Universal curettes
- Gracey curettes
- Special instruments
Difficult to choose?
We recommend
LM-PerioSet 1 & 2.
See page 65.
Periodontics Sickle scalers
Sickle scalers
Sickle LM204S
LM 303-304
- sharply angulated shank and very fine
working end
- excellent pair for the Micro Sickle
Mini Sickle
LM 311-312
Sickle LM23
LM 313-314
- shorter blade and longer lower shank than in
the Mini Sickle
18
Periodontics
Sickle scalers
Crane-Kaplan
LM 322-323
- extremely strong, rigid, sharply angled blade
- for removal of heavy supragingival calculus
Mini Kaplan
LM 333-334
- same angle but with a more delicate blade
than in the Crane-Kaplan
McCall 11A-12A
LM 324-325
Hygienist scalers
Sickle Scaler
LM 141
Scaler H6-H7
LM 146-147
Laplander
LM 148-149
- similar to H6-H7 but with a lateral bending
- easy access to molar area and proximal
surfaces
19
Periodontics Universal curettes
Universal curettes
McCall 13S-14S
LM 222-223
Standard Mini
Curette LM 15-16
LM 225-226
McCall 17-18
LM 277-278
20
Periodontics
Universal curettes
McCall 17S-18S
LM 279-280
17-18 17S-18S
- strong, uniform-width working end - more delicate blade, working
- for all tooth surfaces end narrower than in 17-18
- especially for broad molar surfaces - excellent in tight interdental spaces
17-18 17S-18S
Langer 1/2
LM 281-282
- for premolars and molars in
the lower jaw
Langer 3/4
LM 283-284
- for premolars and molars in
the upper jaw
Langer 5/6
LM 285-286
- for incisors in the upper and
lower jaw
21
Periodontics Universal curettes
Goldman-Fox 3
LM 233-234
Goldman-Fox 4
LM 235-236
Columbia 2L-2R
LM 217-218
Columbia 4L-4R
LM 219-220
Columbia 13-14
LM 237-238
22
Periodontics
Special instruments
LM-Syntette
A combination of universal and finishing
curette.
For the removal of supra- and subgingival
calculus.
For both concave and convex surfaces.
Distal and mesial surfaces of the same
interdental space can be treated with the
same instrument head.
Suitable for both vertical and horizontal
techniques.
Design:
Two elliptical cutting edges
Rounded toe
LM-Syntette
LM 215-216
LM-Syntette, mini
LM 215-216M
- mini model excellent in
tight, deep pockets
Hoe scalers
23
Periodontics Special instruments
Interproximal curettes
Furcation files
SV 5-6 SV 7-8
24
Periodontics
Special instruments
Furcator
Furcator KS
LM 259-260 XSi
- available only with LM-ErgoMax (XSi)
handle
LM-ErgoAccess instruments
Solution for calculus removal from problematic areas.
H-Scaler I
LM 112-156 EASi
H-Scaler II
LM 156-157 EASi
25
Periodontics Gracey finishing curettes
Mini Gracey
- longer lower shank and smaller working end
than in the standard model
Macro Gracey
- standard model’s long working end
combined with mini model’s longer lower
shank
Rigid Gracey
- blade shank thicker and more rigid, and
working end slightly wider than in the
standard model
Gracey Chart
Incisors
GRA 1/2
GRA 5/6
Premolars
GRA 7/8
GRA 11/12
GRA 13/14
Molars
GRA 9/10
GRA 11/12
GRA 13/14
GRA 15/16
GRA 17/18
26
Periodontics
Gracey finishing curettes
Gracey 1/2
LM 201-202
- incisors, premolars
Gra 1/2
Gracey 3/4
LM 203-204
- incisors, premolars
Gra 3/4
Gracey P3-P4
LM 266-267
- short shank makes the instrument
more rigid
Gracey 5/6
LM 205-206
- incisors, premolars
Gra 5/6
Gracey 7/8
LM 207-208
- premolars, molars
Gra 7/8
Gracey 9/10
LM 209-210
- molars
Gra 9/10
Gracey 11/12
LM 211-212
- molars´ mesial surfaces
27
Periodontics Gracey finishing curettes
Gracey 13/14
LM 213-214
- molars´ distal surfaces
Gracey 15/16
LM 245-246
- molars´ mesial surfaces
Gracey 17/18
LM 247-248
- molars´ distal surfaces
28
Periodontics
Gracey finishing curettes
29
Periodontics Gracey finishing curettes
Gracey 11/14
LM 211-214
Gracey 12/13
LM 212-213
Gracey 15/18
LM 245-248
Gracey 16/17
LM 246-247
30
Restoration
- Excavators
- Gingival margin trimmers
- Spatula
- Cord packers
- Carriers
- Pluggers
- Burnishers
- Modelling instruments
- Composite instruments
- Carvers
- Excess removers
- Filling remover
- Crown On/Off instruments
- LM-Cello stripholder
Difficult to choose?
We recommend
LM-CompoSet &
LM-EstheticSet!
See page 65.
Restoration Excavators
Spoon excavators
Round excavators
Cariology
- for the removal of softened, carious dentin
- for the removal of temporary fillings
Surgery
- to sever the periodontal ligament
prior to extraction
- for the removal of granulation tissue
after extraction
Design:
Round working end
Curved cutting edge
32
Restoration
Excavators
Cariology
- extremely effective in removing carious
dentin
- for undermining enamel during tissue-
saving preparations
Periodontics
- for the removal of calculus from hard to
reach areas such as the lower anterior
lingual surfaces
- for the depuration of concave root grooves
and furcations
Surgery
- for the removal of granulation tissue in
connection with apical resections, flap
operations, or extractions
Design:
Round working end and curved cutting edge
Shank angulations ease treatments on hard
to reach buccal, distal, and lingual surfaces
The blade shank is triple-angled, allowing
for “back action” functions
33
Restoration Gingival margin trimmers, Spatula, Cord packers
Gingival Margin
Trimmer, 1.2 mm, distal
LM 121-122
Gingival Margin
Trimmer, 1.2 mm, mesial
LM 125-126
Spatula
Spatula
LM 450-460
Cord packers
34
Restoration
Base carries, Carrier - Plugger, Pluggers
Base carriers
Carrier - Plugger
Pluggers
35
Restoration Pluggers, Burnishers
Burnishers
Burnisher
LM 31-32
Burnisher - Plugger,
ball-ended, 1.5-2.5 mm
LM 471-473
Burnisher 27-29
LM 476-477
Burnisher 21
LM 372-373
Markley 2
LM 354-355
36
Restoration
For esthetic restorative dentistry
Versatile instruments for cavity preparation, combining a trimmer and an excavator. Two different sizes for both mesial and
distal instruments. The smaller is suitable for micro preparation and the larger one can be used for any other cavities.
Available only with LM-ErgoMax (XSi) handle.
CMF Shaper
LM 44-45 XSi
A tomahawk shaped instrument Composite can be easily positioned into mesial and
combining features of a carrier, distal cavities, since the handle and the blade are in
modeller and a finisher. 45-degree angle.
37
Restoration For esthetic restorative dentistry, for composites
Modeller – BrushHolder
LM 481-758 XSi
- a classical modeller PK Thomas 3
combined with a brush holder to
hold and carry disposable micro
brush application tips
For composites
Flow Instrument IO
LM 484-485 XSi
Modelling Instrument
LM 478-479
38
Restoration
For composites
Packer-Modeller IO
LM 482-483
Packer-Modeller IO p
LM 482-702
- combination instrument for premolars
Packer-Modeller IO m
LM 483-703
- combination instrument for molars
39
Restoration For composites, Carvers
Form Condenser,1.5-2.5 mm
LM 702-703
Composite Spatula 6
LM 446-447
Mini Spatula
LM 444-445
Carvers
1/2 Hollenback
LM 741-751
Nyström I
LM 74-75
Nyström III
LM 76-77
Maehlum
LM 71-73
40
Restoration
Carvers, Excess removers
Universal Carver,
occlusal-proximal
LM 71-72
Cleoid-Discoid
LM 731-732
Excess removers
41
Restoration Excess removers, Filling remover
Excess Scaler
LM 785-795
- for the removal of adhesive, cement, and
composite excesses
- when razor-sharp, a very effective excess
remover in approximal spaces
Filling remover
Filling Remover
LM 764-766
- one blade probe-shaped, the other wedge-
shaped
- for the removal of temporary fillings
and crowns
- for bridge removal during fitting
42
Restoration
Crown on and Crown off
Specially designed for placing and removing crowns, inlays, bridges and temporary laminates.
Available only with LM-ErgoMax (XSi) handle.
Crown On I
LM 761 XSi
- single-ended
Crown On II
LM 762-763 XSi
- blade double angled with a 45 degrees twist
- the flattened working end has a hollow in
the middle to stabilize the instrument firmly
on to the occlusal surface while pressing
down the crown
Crown Off
LM 767-768 XSi
- blade double angled with a 45 degrees
twist
- can be used for all types of levering and
removing in the mouth
43
Restoration Stripholder
LM-Cello stripholder
LM-Cello stripholder
LM 2010 C
Prophylactics
- the removal of calculus from contact areas
- preparation for flossing and toothpick use
- when finishing proximal surfaces, the strip
can serve as a toothpaste applicator
Restoration
- the finishing of proximal and contact
surfaces
- preparation for both rubber dam and
matrix techniques
Aesthetic and Prosthetic Care
- the finishing of cement seams on
laminates, cast fillings, and crowns
Orthodontics
- enamel stripping
44
Endodontics
LM-EndoMax
LM’s endodontic hand files with large handles are supreme in ergonomics.
Soft and thick silicone handle improves the grip and makes filing and rotating more comfortable. LM-EndoMax files and
reamers adhere to the contour of the canal, cleaning all surfaces evenly and effectively.
- improved tactile sensitivity
- greater working comfort
- improved torque and force transmission
- visible identification stamples
- colour-coding according to ISO specifications
LM-Endomax
Reamers
LM-Reamers have loosely twisted and flexible triangular cross-section instrument blades. The instrument is primarily
designed for the apical preparation of straight canals, which is why the blade can also be used for cutting. For this
instrument, a rotating preparation motion is the most effective.
LM-EndoMax
K-Files
LM’s K-Files have an extremely flexible triangular profile blade. The larger cutting angle enhances instrument use compared
to a similar square profile instrument. Preparation waste can also be removed from the canal more easily, because there
is more room in the instrument threads. The threads are tightly spaced and the tip is sharp, making the instrument ideally
suited to the preparation of straight canals using filing and rotating motions. Small sizes (006 - 015) can also be used in
preparation of curved canals. A short, back-and-forth preparation motion is most effective for the instrument.
LM-EndoMax
Hedstroems
The blade on LM-Hedstroem files is milled instead of twisted like on other root canal instruments. Especially well suited
to procedures where space is made for the root canal orifice (coronal flare). Hedstroem files are only intended for use with
filing, back-and-forth preparation motions.
LM-EndoMax
NiTi Files
The material used for NiTi files differs from that used for K-files, whereas the file form is the same on both. NiTi (Nickel-
Titanium) is an elastic material, which will return to its original shape after bending or deformation. The instrument tip is
not used for cutting, which makes LM NiTi instruments ideal for the preparation of curved canals. Both a filing and rotating
preparation motion are suitable for these instruments.
46
Endodontics
Hand files and reamers
31 25 21 mm 31 25 21 mm
LM-EndoMax LM-EndoMax
Reamers K-Files
SSt Sil SSt Sil
ø ISO 008 010 015 020 025 030 035 040 045 050 055 060 070 080 ø ISO 006 008 010 015 020 025 030 035 040 045 050 055 060 070 080
Assortment Assortment
015-040 1 1 1 1 1 1 015-040 1 1 1 1 1 1
Assortment Assortment
045-080 1 1 1 1 1 1 045-080 1 1 1 1 1 1
Individual Individual
packages 6 6 6 6 6 6 6 6 6 6 6 6 6 6 packages 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
31 25 21 mm 25 21 mm
LM-EndoMax LM-EndoMax
Hedstroems NiTi FILES
SSt Sil NiTi Sil
ø ISO 008 010 015 020 025 030 035 040 045 050 055 060 070 080 ø ISO 015 020 025 030 035 040 045 050 055 060
Assortment Assortment
015-040 1 1 1 1 1 1 015-040 1 1 1 1 1 1
Assortment Individual
045-080 1 1 1 1 1 1 packages 6 6 6 6 6 6 6 6 6 6
Individual
packages 6 6 6 6 6 6 6 6 6 6 6 6 6 6
47
Endodontics Explorer, Excavators
- extended and correctly angled shanks as well as highly effective blade angles allow for the
preparation of all types of pulp cavities
- effective for the cleaning of pulp chambers and location of root canals as well as the removal
of temporary fillings
48
Endodontics
Plugger, Endodontic surgery
Endo plugger
Endodontic surgery
49
Endodontics Endodontic surgery
Apex Packer
GFV 0.4 - 0.6 mm
LM 410-420
Apex Packer
GFV 0.8 - 1.0 mm
LM 430-440
50
Orthodontics
Orthodontics
Ligature Tucker
LM 414-415
52
Other products
- Ultrasonics & polishing
- Instruments sets
- Special products
- Rational instrument maintenance
Ultrasonics &
polishing Ultrasonic and polishing devices
LM-ErgoGrip LED
LM 10094
LM-ErgoGrip LED with wide ring lens and LM-ErgoGrip Focus LED with focused lens both guarantee a comfortable, non-
slip grip and good tactile sensitivity. The soft material dampens the vibrations and keeps your hands warm, preventing
Carpal Tunnel Syndrome and blood circulation problems.
ErgoGrips are removable and autoclavable, disposing of the need for buying several expensive handpieces. A few
ErgoGrips will keep your practise running effectively patient after patient.
54
Ultrasonics &
polishing
Ultrasonic and polishing devices
More information on tips see page 59-64. LM 100751 (liquid dispenser, IntroKit B)
Maximum hygiene
- Easy and efficient cleaning function ensures reliable and continuous operation.
- Non-clogging construction keeps water and powder separate to the last second.
- Water jet cleaning for treated area is easily activated by foot pedal.
- The detachable and autoclavable nozzles are easy to clean.
Easy adjustment of power
LM-ProPower AirLED has two working modes. Choosing the working mode from the control panel will set the maximum
power limit to 100 % or 60 %.
55
Ultrasonics &
polishing Ultrasonic and polishing devices
Technical data
LM-ProPower AirLED LM 100722 (tap water connector)
LM 100732 (liquid dispenser)
Technical data
LM-ProPower CombiLED LM 10072 (tap water connector, IntroKit A)
LM 10074 (tap water connector, IntroKit B)
LM 10073 (liquid dispenser, IntroKit A)
LM 10075 (liquid dispenser, IntroKit B)
LxWxH 270 x 140 x 165 mm (without bottle and
powder container)
Weight 3400 g
Voltage 100 Vac, 50–60 Hz
115 Vac, 50–60 Hz
230 Vac, 50–60 Hz
Power cord Separate with protective earthed plug
Power consumption Max. 40 VA
Scaler power consumption Max. 24 VA
Scaler power output Max. 10 W (24–28 kHz, automatic tuning)
Water supply pressure 1–10 bar (0,1–1,0 MPa, 14,5–145 PSI) with
external water supply
Water consumption 10–50 ml/min
Bottle volume 500 ml (internal water supply)
Air supply pressure 4 - 10 bar (0,4 - 1,0 MPa, 58 - 145 PSI)
Air consumption
Powder container capacity
Max. 20 l/min
45 g All inclusive CombiLED IntroKit
- 5 ErgoGrips
- 3 ultrasonic tips (IntroKit A: PE-37, -39, -40
All LM-ProPower devices are available with or IntroKit B: PE-41P, -41PS, -41A)
tap water connector or with the quick-connect - 3 torque tip wrenches
medicament/water dispenser. They can also be - 2 swivel nozzles
integrated into the dental unit. - 2 x 180 g polishing powder
LM-ProPower SteriKit
LM-ProPower SteriKit
LM 10080
Safe and reliable sterile system that bypasses
current water supply completely. 8 sterile tips
available for apical surgery. The SteriKit has
pressurized irrigation system which allows
easy and cost efficient installation. No need
for expensive peristaltic pump. SteriKit is
compatible with every Amdent and
LM ultrasonic device. Upgrade your
unit with more functionality!
For more information about the sterile tips
see page 64.
56
Ultrasonics &
polishing
Ultrasonic and polishing devices
Hygiene
LM-PowerHand has an outstanding hygiene concept. All surfaces are easy to wipe and keep clean. All knobs and buttons
are autoclavable. The silicone LM-ErgoGrip is easily detached for cleaning and sterilizing.
Versatile
LM-PowerHand brings power and versatility to periodontal, endodontic and restorative treatments. In addition to the fixed
water line model, the device also comes in single bottle-equipped – LM-Solo – or double bottle-equipped – LM-Duo –
versions, which allow for the use of several fluids during a single procedure. The LM-PowerHand has an endo function,
which allows the power to be reduced by 50%. This makes it possible to work safely when performing high-precision
procedures.
Product codes LM 10090 and LM 10091 contain the device with handpiece, 1 handpiece holder, 3 ErgoGrips
(LM 10090 contains 2 LM-ErgoGrip LEDs and 1 LM-ErgoGrip Focus LED), 3 tips (PE-37, PE-39, PE-40),
3 torque tip wrenches, 1 of each silicone knob and button, 1 foot pedal.
Product codes LM 10040 and LM 10041 contain the device with handpiece, 1 handpiece holder, 3 ErgoGrips
(LM 10040 contains 2 LM-ErgoGrip LEDs and 1 LM-ErgoGrip Focus LED), 3 tips (PE-41P, PE-41PS, PE-41A),
3 torque tip wrenches, 1 of each silicone knob and button, 1 foot pedal.
57
Ultrasonics &
polishing Ultrasonic and polishing devices
Ergonomic handpieces and detachable autoclavable silicone grips for comfortable, non-slip grip and good tactile sensitivity.
LM-ErgoGrip LM-PowerHand HP
LM 10095 LM 10093
LM-PowerHand HP is available in two different models, with and without a light. The handpieces come equipped with
interchangeable and autoclavable LM-ErgoGrips made of silicone. The soft material dampens the vibration and insulates
against a cold feel. This prevents CTS and blood circulation problems. LM-ErgoGrip is available in three different models,
LM-ErgoGrip, LM-ErgoGrip LED and LM-ErgoGrip Focus LED.
Technical data
LM-PowerHand LM 10090 (IntroKit A)
with LM-PowerHand HP LED LM 10040 (IntroKit B)
LM-Duo LM 10097
Medicament dispenser
Bottle volume 125 ml and 2 x 250 ml
Bottle positions 2
Bottle types Autoclavable transparent 125 ml and 250 ml
Autoclavable “UV-protected” 125 ml and 250 ml
58
Ultrasonics &
polishing
Ultrasonic and polishing devices
Scaling
Max 70 %
Minimally invasive restoration
Special purpose
Sterile treatment
Wrench selection
Universal tip wrench Torque tip wrench Wrench for file holders Universal plastic tip wrench
LM 10089S • slim design LM 10087 LM 10089
LM 10088S
• hexagonal design
LM 10088
Scaling
Scaling is precision work. Proper ultrasonic instrument selection is of primary importance in achieving complete
periodontal debriment. Our wide variety of tips gives you the freedom to choose.
PE-31 PE-32 P
PE-39
LM 100131 LM 100132
2 LM 100139
L
Used for lingual, buccal
ccal and Used for lingual
al and buccal Used for universal,
al, lingual
approximal supragingival
gival scaling. supragingival scaling. and buccal supragingival
gingival
Scaling
scaling.
Universal
59
Ultrasonics &
polishing Ultrasonic and polishing devices
Max 40 %
Working mode coding Endo function Max 60 % Max 70 % Max 100 %
Universal
PE-41AF
Periodontics
LM 100141AF
1AF
Used for lingual, buccal
cal and
approximal supragingivall
scaling. Also for the removall of PE-33 PE-33L
overhangs. LM 100133 LM 100133L
Used for subgingival
ingival scaling U
Used for subgingival
val scaling
and furcations. and furcations. Tip angled
tto left to left for better access to
furcations.
60
Ultrasonics &
polishing
Ultrasonic and polishing devices
Max 40 %
Working mode coding Endo function Max 60 % Max 70 % Max 100 %
Implant maintenance
IM-1 IM-2
LM 100301 Pack of 4 LM 100302 Pack of 4
Scaling
Used on implants for the removal of calculus on fixtures, Same design as IM-1, but the working end nd is angulated for
abutments and crowns. The working
rking end is coated with better access to difficult-to-reach surfaces.
urfaces. Used together
PEEK© material to avoid damaging or discolouring the with the instrument holders IH-1 or IH-2.
-2.
S
implant. Used together
ether with the instrume
instrument
nt holders IH-1
or IH-2.
MI-4
LM 100604
Heavily contra-angled, used on
lingual, buccal and distal areas
on molars and furcations.
Endodontics
Ultrasonic tips can be utilised in many areas in endodontics. They are truly excellent in the removal of posts,
the removal of dentin in pulp chambers, finding and widening orifices, preparing canals, removing broken instruments
and cleaning prepared canals.
Pulp chamber
set with various cementing agents. The attached pulp stones from the
att he pulp pulp chamber for removing pulp
tip is placed against the post andd then chamber floor. Compared to rotatingting sstones, dentin and old fillings. Also
moved in a circular fashion to remove e it. instruments the risk of perforating the tooth for finding hidden openings. Length h
Length 17 mm. is small. Length 17 mm. 17 mm.
EN-4 EN-12
LM 100204 LM 100212
Round diamond-coated tip for removing gross dentin, forr moving F and diamond-coated tip. Used in the pulp chamber for
Flat
access line angles, for cutting a groove in the mesial access wall to drop removing pulp stones and also for removal of dentin
remo ntin and
into the second mesial-buccal canal (MB2) systems, and for quickly
ickly and old fillllings. Compared to rotating instruments the risk
sk of
carefully unroofing pulp chambers. Length 16 mm. perforating the tooth is small.
pe
61
Ultrasonics &
polishing Ultrasonic and polishing devices
Canal preparation
Length 25 mm. Tips EN-9, EN-10 and EN-11 are made of titanium and have no diamond coating. They hold
a bend if applied forcefully. Titanium tips cut evenly and have an exceptional tactile sense. The small
diameter makes them suitable for use in the apical part of root canals. Primary area of use is to isolate
and remove broken instruments. Even broken instruments that are firmly stuck in the apical part of
the root can often be removed by ultrasonic vibrations. Used in the mid and apical part of a root with
EN-9 illumination and magnification.
LM 100209
Length 20 mm.
FH-1, FH-2 and FH-3 are holders for hand files. By using the hand file in a fluid-filled root canal the ultrasonic vibrations clean the canal very efficiently.
The resulting cavitation effect gives a proven high degree of cleanliness.
62
Ultrasonics &
polishing
Ultrasonic and polishing devices
Max 40 %
Working mode coding Endo function Max 60 % Max 70 % Max 100 %
IH-1 IH-2
Endodontics
LM 100404 100405
LM 10
Holder for implant maintenance
nance tips and IH-2 has the same shape and area
AP-1 and AP-2 tips for apical
pical surgery. of use a
as IH-1. 100° angle.
Can also be used with endosonic
sonic files and
other instruments with a diameter off 0.8
mm. 125° angle.
Working mode coding: See chosen instrument
W
Working mode coding: See chosen instrument
Apical surgery
The diamond-coated tips are used for opening and clearing the root when doing apical surgery. The long necks of the
tips give excellent visibility and the ultrasonic vibrations in combination with the diamond coating give a higher degree
of tactility and precision compared to rotating instruments.
Apical surgery
AP-4 AP-5 AP-6
LM 100502 LM 100503 LM 100504
Same shape and area of use as Designed for use on molar roots in Designed for use on molar
AP-3, but 0,7 mm in diameter,
ameter, the maxillary right and mandibular
andibular roots in the maxillary right and
making it more suitable forr larger left.
le mandibular left.
roots.
Diameter 0.5 mm. 75° angle.
Di Diameter 0.5 mm. 110° angle.
Diam
80° angle.
63
Ultrasonics &
polishing Ultrasonic and polishing devices
Special purpose
Ultrasonic technology can today be used for much more than just scaling and endodontics. Ultrasonic tips can be used
to remove crowns, for amalgam condensation and for the application of thixotropic cementation.
Sterile treatment
Tips for sterile apical surgery. Treatment can be done with sterile water or desinfectants. The diamond-coated tips
are used for opening and clearing the root. The long necks of the tips give excellent visibility and the ultrasonic
vibrations in combination with the diamond coating give a higher degree of tactility and precision compared to
rotating instruments.
More information about the ProPower SteriKit see page 56.
IHs-1 IHs-2
LM 100801 LM 100802
See chosen instrument See chosen instrument
Sterile instrument holder for use with AP-1
P-1 Same shape and area of use as IHs-1.
-1.
and AP-2 tips for apical surgery. Can also
o 100° angle.
1
be used for endosonic files and other
instruments with a diameter of 0.8 mm.
125° angle.
64
Instrument sets
Instrument sets
Instrument sets
LM-PerioSet 1 LM-PerioSet 2
LM 6652 Si / XSi LM 6682 Si / XSi
LM-Servo 5 LM-Servo 8
Mini Sickle Mini Sickle
Curette McCall 17-18 Curette McCall 17-18
Gracey 1/2 Gracey 1/2
Gracey 11/12 Gracey 9/10
Gracey 13/14 Gracey 11/12
Gracey 13/14
Mini Gracey 15/16
Mini Gracey 17/18
LM-DiagnoSet LM-CompoSet
LM 6651 Si /XSi LM 6657 Si / XSi
LM-Servo 5 LM-Servo 5
Mirror Handle & mirror Mini Spatula
Explorer LM 5-8 Plastic instrument, ant.
WHO Probe LM 550B Form Condenser
Round Excavator 1.5 mm Packer-Modeller IO
Tweezers Mini Excess Scaler
65
Instrument sets Instrument sets
LM-IntroKit
LM 6600
Are you setting up a new dental practice or updating your instruments? The LM-IntroKit is an affordable introduction
package, consisting of five basic instrument sets. The IntroKit contains two diagnostic sets, one endodontic set, one
preparation set and one periodontic set.
LM-Servo 8
Tweezers
2 x Mirror handle and mirror LM-Servo 8
Explorer 5-8 Mirror handle and mirror
Round Excavator, 1.5 mm Tweezers
Carver Nyström III Explorer 5-8
Mini-Sickle
Gracey 1/2
Gracey 7/8
Gracey 11/12
Gracey 13/14
66
Special products
LM-MultiHolder system
LM-MultiHolder system
Two MultiHolder instruments and different kinds of replaceable plastic working ends – a real multi-function instrument!
- angle options allow for easy access to even the more complex areas
- optimal combination of steel and plastic – the steel shank is rigid and only the working end will flex, when required
LM-MultiHolder PK I
LM 750-756
LM-MultiHolder PK II
LM 752-754
LM-Implant Scaler
For surpragingival cleaning of implants.
- completely safe for the titanium
abutments
- one design does it all - four instrument
angle options and 360° turning scaler
enable for easy access to all tooth
surfaces
LM 7701 Implant Scaler circa 30 pcs /
package
LM-Contact Formers
67
Special products LM-MultiHolder system
LM-Gingival Retractors
For establishing optimum working conditions
for procedures at the gum line.
Three sizes, circa 60 pcs / package
LM 7502 S for incisors
LM 7504 M for premolars
LM 7506 XL for molars
LM 7500 Assortment package circa 90 pcs
(30 pcs / size)
LM-Cervical Matrices
For making anatomically correct fillings at
the gum line
- protects from moisture
- prevents air bubbles
Four models for different size and shape,
circa 60 pcs / package
LM 7602 for incisors
LM 7604 for canines and premolars
LM 7606 for small molars
LM 7608 for large molars
LM 7600 Assortment package circa 120 pcs
(30 pcs / model)
LM-MultiLever
LM-MultiLever
LM 7550
LM-MultiHolder IntroKit
LM-MultiHolder IntroKit
LM 7555K
The introduction kit contains LM-MultiHolder instruments PK I and PK II (XSi), a MultiLever and samples of all available
working ends. There are a total of 48 working ends, 4 for each size of each working end.
You may order LM-MultiHolder IntroKit sample package also separately. LM 7555
68
Special products
Surgical handles
LM-CompoKnife
LM-CompoKnife
LM 9006
A multipurpose knife for the wide-ranging
needs of dental care
- precise, strong and sharp handling
- round silicone handle
- good feel in the hand
- the blade can easily be maneuvered on the
various surfaces of the tooth
- the blade is deeply set, with the shaft
preventing the blade from damaging soft
tissue and allowing for the use of great
tractive and lateral force when carving out
excess material
LM-ErgoHold 3
LM-ErgoHold 3
LM 9003
A new type of surgical handle
- excellent grip
- precise blade control
- controlled rotation
- blade position responsiveness maintained
- controlled movement through tissue
- no. 3 fitment
- elastic silicone coating
PAT.PEND.
69
Special products Saliva ejector, Brushes, Code rings
LM-MultiSeptor
Effective and easy-to-use saliva
ejector
LM-MultiSeptor keeps the area being treated
dry – both lingual and buccal. It functions
equally well on both the upper and lower jaw.
- can easily be formed to the desired shape
- comfortable for the patient
- leaves ample space for procedures
- an invaluable aid when working unassisted.
The MultiSeptor is compatible with all
standard suction units.
Care: disinfect, rinse, remove connections
clean, and sterilize. Connections must be
cold-sterilized.
LM-MultiSeptor, 40 cm
LM 2020
LM-MultiSeptor, 50 cm
LM 2020A
Spare Parts
Replacement tubes = 5 tubes (40 cm) + spring
LM 2021
Replacement tubes = 5 tubes (50 cm) + spring
LM 2021A
Code Rings
LM 5000 blue
LM 5001 green
LM 5002 orange
LM 5003 red
LM 5004 yellow
LM 5005 black
LM 5006 white
LM 5007 brown
LM 5008 lavender
- package 50 pcs/colour
70
Rational instrument
maintenance
Instrument cassettes, Code buttons, Instrument disinfectant
LM-Servo 5
LM 6650
- for five instruments
- dimensions: 180 x 86 x 28 mm
PAT.
LM-Servo 8
LM 6680
- for eight instruments
- dimensions: 180 x 136 x 28 mm
PAT.
Code buttons
71
Rational instrument
maintenance Sharpening machine
LM-RondoPlus
LM 8600
Package includes: sharpening machine, foot
pedal, 400 grit sharpening stone, 2 LM-
Fingos, 5 emery tapes, instruction CD and
quick guide. Interactive
e demons
demonstration
stra
tratio
tion
ti n and
a
instruction CD and handy quick
Spare Parts guide included!
Grinding stone
600 grit (white) LM 8660
400 grit, coarser (grey) LM 8640
320 grit, coarsest (black) LM 8632
Foot pedal LM 8630
Emery tapes, 5 pcs LM 8550
LM-Fingo, 2 pcs LM 8602
LM-Fingo, 6 pcs LM 8606
72
Rational instrument
maintenance
Instructions for maintenance
1. Pre-disinfection
Do not leave dirty instruments dry - put them into disinfecting solvent as soon as possible. Chemical disinfectant
LM-ProColor is recommended. Pay close attention to the correct dosages and exposure times. If you are using
a thermodisinfector, skip service cycle steps 1-5.
2. Rinsing
Rinse instruments thoroughly under warm running water.
3. Cleaning
Washing machine
Hand wash: Remove all visible dirt with warm water. Use a soft brush and detergent
Ultrasonic cleaner: use instrument cassettes to prevent damage
4. Rinsing
Rinse instruments thoroughly under warm running water.
5. Drying
Dry instruments before sterilization
6. Inspection and sharpening
Sharpen, service or replace instruments, if necessary
7. Packing
Pack serviced and cleaned instruments for sterilization
8. Sterilization
Autoclave: place clean, dry and properly packed instruments into the autoclave.
Hot-air sterilization: place clean, dry and properly packed instruments into the hot-air
sterilizer; do not fit them in too tightly; ensure that temperature is correct (max. 180°C/355°F).
Important!
- regularly service the machines
- follow all user instructions
- pay special attention to correct
dosage and exposure
73
Index
Index
74
75
LM-Instruments Oy
PL 88 (Norrbyn rantatie 8)
FI-21601 Parainen
Finland
Tel. +358 2 4546 400
Fax +358 2 4546 444
info@lminstruments.com
www.lminstruments.com