Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Input data
Project
Date : 28-Nov-18
Settings
(input for current task)
Materials and standards
Concrete structures : EN 1992-1-1 (EC2)
Coefficients EN 1992-1-1 : standard
Wall analysis
Active earth pressure calculation : Coulomb
Passive earth pressure calculation : Caquot-Kerisel
Earthquake analysis : Mononobe-Okabe
Shape of earth wedge : Consider always vertical
Base key : The base key is considered as inclined footing bottom
Allowable eccentricity : 0.333
Verification methodology : according to EN 1997
Design approach : 2 - reduction of actions and resistances
Partial factors on actions (A)
Permanent design situation
Unfavourable Favourable
Permanent actions : gG = 1.35 [–] 1.00 [–]
Variable actions : gQ = 1.50 [–] 0.00 [–]
Water load : gw = 1.35 [–]
Concrete : C 30/37
Cylinder compressive strength fck = 30.00 MPa
Tensile strength fctm = 2.90 MPa
Longitudinal steel : B500
Yield strength fyk = 500.00 MPa
Geometry of structure
Coordinate Depth
No.
X [m] Z [m]
1 0.00 0.00
2 0.25 3.00
3 0.75 3.00
4 0.75 3.35
5 -1.25 3.35
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Coordinate Depth
No.
X [m] Z [m]
6 -1.25 3.00
7 -0.25 3.00
8 -0.25 0.00
The origin [0,0] is located at the most upper right point of the wall.
Wall section area = 1.83 m2.
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Name : Geometry Stage - analysis : 1 - 0
3.35
[0.75;
[0.75;
3.00]
3.35]
12
10
11
9
7
8
0.50
[0.25;
3.00]
12.00:1
6
[-0.25;[0.00;
0.00] 0.00]
1
2
3
4
5
[-0.25;
0.25
3.00]
16
15
2.00
1.00
[-1.25;
[-1.25;
0.35 3.00]
3.35]
14
13
3.00
3.35
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Basic soil parameters
jef cef g gsu d
No. Name Pattern
[°] [kPa] [kN/m3] [kN/m3] [°]
Soil parameters
Glina
Unit weight : g = 19.80 kN/m3
Stress-state : effective
Angle of internal friction : jef = 28.00 °
Cohesion of soil : cef = 10.00 kPa
Angle of friction struc.-soil : d = 20.00 °
Soil : cohesive
Poisson's ratio : n = 0.45
Saturated unit weight : gsat = 20.00 kN/m3
Backfill
Unit weight : g = 19.00 kN/m3
Stress-state : effective
Angle of internal friction : jef = 35.50 °
Cohesion of soil : cef = 0.00 kPa
Angle of friction struc.-soil : d = 20.00 °
Soil : cohesionless
Saturated unit weight : gsat = 20.00 kN/m3
Tampon šljunak
Unit weight : g = 21.00 kN/m3
Stress-state : effective
Angle of internal friction : jef = 41.50 °
Cohesion of soil : cef = 0.00 kPa
Angle of friction struc.-soil : d = 20.00 °
Soil : cohesive
Poisson's ratio : n = 0.20
Saturated unit weight : gsat = 22.00 kN/m3
1 0.70 Glina
2 2.30 Backfill
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Layer
No. Assigned soil Pattern
[m]
3 0.35 Glina
5 - Glina
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Name : Profile and assignment Stage - analysis : 1 - 0
0.70
2.30
0.35
0.30
+z
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Foundation
Type of foundation : soil from geological profile
Terrain profile
Terrain behind the structure is flat.
Water influence
GWT behind the structure lies at a depth of 2.00 m
Uplift in foot. bottom due to different pressures is not considered.
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Active pressure distribution behind the structure (without surcharge)
Layer Start [m] sZ sW Pressure Hor. comp. Vert. comp.
No. End [m] [kPa] [kPa] [kPa] [kPa] [kPa]
0.00 0.00 0.00 0.00 0.00 0.00
1
0.70 13.86 0.00 0.00 0.00 0.00
0.70 13.86 0.00 3.40 2.77 1.98
2
2.00 38.56 0.00 9.46 7.70 5.50
2.00 38.56 0.00 9.46 7.70 5.50
3
3.00 48.56 10.00 11.92 9.70 6.92
3.00 48.56 10.00 5.42 5.10 1.86
4
3.35 52.06 13.50 6.55 6.15 2.24
Water pressure distribution
Point Depth Hor. comp. Vert. comp.
No. [m] [kPa] [kPa]
1 0.00 0.00 0.00
2 0.70 0.00 0.00
3 2.00 0.00 0.00
4 3.00 10.00 0.83
5 3.00 10.00 0.00
6 3.35 13.50 0.00
Pressure profile due to surcharge - Construction surcharge loadings
Point Depth Hor. comp. Vert. comp.
No. [m] [kPa] [kPa]
1 0.00 1.41 0.75
2 0.70 1.41 0.75
3 0.70 1.00 0.71
4 2.00 1.00 0.71
5 3.00 1.00 0.71
6 3.00 1.51 0.55
7 3.35 1.51 0.55
Forces acting on construction
Name Fhor App.Pt. Fvert App.Pt. Coeff. Coeff. Coeff.
[kN/m] z [m] [kN/m] x [m] overtur. sliding stress
Weight - wall 0.00 -1.10 43.80 1.12 1.000 1.000 1.350
FF resistance -15.24 -0.16 0.00 0.00 1.000 1.000 1.000
Weight - earth wedge 0.00 -2.13 31.15 1.68 1.000 1.000 1.350
Active pressure 17.48 -1.17 11.78 2.00 1.350 1.350 1.350
Water pressure 9.11 -0.45 0.42 2.00 1.350 1.350 1.000
Uplift pressure 0.00 -3.35 0.00 1.25 1.000 1.000 1.000
Construction surcharge loadings 2.82 -1.25 2.35 2.00 1.500 0.000 1.500
Construction surcharge loadings 0.00 -3.35 3.75 1.63 0.000 0.000 1.500
Metalna ograda 0.00 -3.35 0.25 1.13 1.000 1.000 1.350
Verification of complete wall
Check for overturning stability
Resisting moment Mres = 101.10 kNm/m
Overturning moment Movr = 36.04 kNm/m
Wall for overturning is SATISFACTORY
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Overall check - WALL is SATISFACTORY
1 0.70 Glina
2 2.30 Backfill
3 0.35 Glina
5 - Glina
Foundation
Type of foundation : soil from geological profile
Terrain profile
Terrain behind the structure is flat.
Water influence
GWT behind the structure lies at a depth of 2.00 m
GWT in front of the structure lies at a depth of 1.00 m
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Subgrade at the heel is not permeable.
Uplift in foot. bottom due to different pressures is not considered.
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Bearing capacity of foundation soil Rd = 71.43 kPa
Bearing capacity of foundation soil is SATISFACTORY
[GeoStructural Analysis - Cantilever Wall | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]