Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Inno ty
x ib il i
fle
DESIGNER AND MANUFACTURER SINCE 1986
GECITECH specializes in the manufacture of flexible hoses and fittings for the
food, chemical, pharmaceutical, biotechnology and cosmetic industries.
The wide product range including silicone, rubber and thermoplastic flexible
hoses, as well as stainless steel fittings, covers all our customers’ needs.
Thanks to our pioneering R&D department, staffed with highly qualified engineers,
GECITECH can meet any customer’s specification by designing and improving
co-engineering solutions. This expertise enables the development of patented
innovative products.
Our products are manufactured and assembled in our workshops by our qualified
and experienced staff, trained in the latest technologies.
Our cleanroom:
900 m ² in
a controlled
atmospheric area
for silicone hose
production
Stainless
steel fittings
production
Assembly
room equipped
with the latest
technologies
Cleaning
station using
reverse
osmosis water
1
GSI® 75 NT and NTP SILICONE
Fully extruded silicone, textile reinforcements and HR* stainless steel wiring. NT
GSI 75 NT version white platinum cured. NTP version natural platinum cured..
PRODUCT HIGHLIGHTS
NT model
l Autoclavable hose. l Recommended for food and pharmaceutical
l High working temperature. applications.
l Good vacuum capability. NTP model
l High flexibility and robustness. l Recommended for food, pharmaceutical
and biotechnology applications.
l Cytotoxicity, Haemolysis, European Phar-
macopoeia.
GSI 75 NTP
n Available from ND 8 to 102 mm (0.3 to 4.0 inches). GSI 75 NT ®
et NTP
n Working pressure from 6 to 20 bar (87 to 290 PSI). CE 1935/2004 Gecitech
n Working temperature range from -60°C to +180°C (-76°F to 356°F). GSI ®
75 NTP assembly
TRESSIL® SILICONE
Fully extruded silicone, textile braid reinforcement, platinum cured.
PRODUCT HIGHLIGHTS
n No vacuum capability.
Assembly options (See page 13)
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design (Non
Retention System). The hose can be also supplied with reusable VNRS ® fittings (from DN6). Many types of
NRS VNRS fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC, FLANGES, etc.).
SPIRSIL® SILICONE
Fully extruded platinum cured silicone with stainless steel wiring HR* embedded in the wall.
PRODUCT HIGHLIGHTS
SILICONE HOSES
us). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS, FIL, GAS, NPT, JIC,
NRS MSP FLANGES, etc.). *HR: Highly resistant against stress corrosion cracking.
(Consult us)
PRODUCT HIGHLIGHTS
l For the transfer of all food products, down alkaline metal and fluorinated gas)
including oily and fatty products, liquid and permanent steam.
chemical products, gas (except melted l Excellent thermal protection.
3
POLYTECH® PFA / EPDM
White smooth PFA bore with textile ply and galvanized steel wires embedded in the wall.
Outer surface is blue EPDM (other colours available upon request).
PRODUCT HIGHLIGHTS
PRODUCT HIGHLIGHTS
l Robust hose for the transfer of food, using bipolar solvents in explosive areas.
pharmaceutical and chemical products
PRODUCT HIGHLIGHTS
VIEWLINE® MFA
Fluorinated thermoplastic, translucent to view the product transfer.
PRODUCT HIGHLIGHTS
THERMOPLASTIC HOSES
cally inert to avoid contamination of the
transferred product. Suitable for food, the ratio pressure / temperature applica-
pharmaceutical, cosmetic and chemi- tions.
cal applications. It is also tasteless and l Can be assembled in longer length
odorless. for tank level applications. (glass gauge
replacement).
PRODUCT HIGHLIGHT
5
CONVOLUTED PTFE HOSE WITH STAINLESS STEEL BRAID
PTFE convoluted hose. Outer surface reinforced by a 304L stainless steel braid.
PRODUCT HIGHLIGHTS
l Ideal for the transfer of aggressive products in dynamic application.
l Ideal for the transfer of chemical l The non-stick quality of the PTFE
products, solvents and steam both allows good flow of the conveyed
THERMOPLASTIC HOSES
l Very robust hose recommended for l Excellent rub and abrasion resistance.
all types of food products except for oily l Good vacuum capability.
and fatty products.
BLUTECH® BUTYL
Clear Butyl with textile plies and embedded in the wall galvanized steel wires
reinforcement. Outer surface blue Butyl.
PRODUCT HIGHLIGHTS
l Very flexible hose recommended for l Will not contaminate the products
the transfer of beverage, beer and distil- transferred. Tasteless and odorless.
led drinks up to 96% alcohol. l Good vacuum capability.
ELASTOMER HOSES
CE 1935/2004
NITRIFOOD® NITRILE
White NBR with textile plies and embedded in the wall galvanized steel wires rein-
forcement. Outer surface light grey Chloroprene.
PRODUCT HIGHLIGHTS
.
l Robust hose recommended mostly l Excellent rub and abrasion resistance.
for oily and fatty products. l Good vacuum capability.
lVery robust hose without wire reinfor- food products, except oily and fatty pro-
cement. ducts.
l Excellent rub and abrasion resistance. lCan be used for metal detectors.
l Recommended for processing most
VAPROCESS® EPDM
White EDPM with synthetic plies reinforcement. Outer surface micro perforated blue EPDM.
PRODUCT HIGHLIGHTS
l Very flexible hose without wire reinfor- l Ideal for cleaning hose reel applications
cement. (except slaughterhouses).
l Recommended for processing most food l Caution: no continuous steam application.
products, except oily and fatty products.
VTA® BUTYL
White Butyl with steel braid reinforcement embedded in the wall. Outer surface
microperforated grey Butyl.
PRODUCT HIGHLIGHTS
food products in high pressure and non-
l Very flexible and robust hose improving permanent steam.
operator safety.
l A versatile hose compatible with most l Long manufacturing lengths.
n Working pressure 8 bar at 170°C and 30 bar at 95°C (116 PSI at +338°F and 435 PSI at
203°F), depending on duration. Contact us for temperature requirements over 95°C (203°F).
n Working temperature range from -40 to +170°C (-40° to +338°F).
n Standard manufacturing length 60 m (196.8 feet).
Assembly options (See page 13)
The 316L stainless steel swaged fittings are monoblocs (no welds) in accordance with the NRS® design
(Non Retention System). Many types of fittings are also available upon request (SMS, DIN, CLAMP, RJT, ISS,
8 NRS
FIL, GAS, NPT, JIC, FLANGES, etc.).
DEPOTAL ANNELE® EPDM
White EDPM with synthetic reinforcement ply and steel wire. Outer surface corru-
gated blue EPDM rubber.
PRODUCT HIGHLIGHTS
l High flexibility for flow control panel, etc. lExcellent rub and abrasion resistance.
l Robust hose recommended for all l Good vacuum capability.
types of food products except oily and
fatty products.
O T H E R A P P L I C AT I O N S
l Powder suction and discharge hose for for explosive areas.
food, pharmaceutical and cosmetic indus- l High resistance to UV and ozone.
tries requiring a food contact certification
PRODUCT HIGHLIGHTS
l Thermal protection of the hose, limits l Limits the heat loss of the conveyed
thermal shocks between inside and outside. product.
l Ideal for the transfer of liquid or l Very high resistance against me-
gas. chanical stress (5 times higher than
O T H E R A P P L I C AT I O N S
CE 10/2011
Atex validated by INERIS in accordance with
the certification n°87830-1/07 (Assembly by GECITECH).
Assembly options (See page 13)
NRS Can be equipped with 316L stainless steel fittings. Many styles of fittings available: GAZ,
10 NPT, DIN2353, etc.
FIBREGLASS SLEEVE COATED WITH SILICONE
PRODUCT HIGHLIGHTS
l Protects the operators from heat. l Finishing with stainless steel over-
l Protects the hose from ambient tem- rings at both ends.
perature.
PRODUCT HIGHLIGHTS
l Ideal to maintain the transferred l Can be used with all types of hoses
O T H E R A P P L I C AT I O N S
liquid temperature thanks to hot water, (consult us).
cold water or air circulation system.
Options:
PRODUCT HIGHLIGHTS
l Maintains the fluid at the required l External silicone sleeve for easy
temperature using electrical wire, with cleaning.
self-regulating system or PT100 sensor l Finishing with stainless steel over-
and external regulator. rings at both ends.
l Insulating foam.
11
COIL
CLEANING
Stainless steel hose reel used for cleaning operations in food indus-
tries.
PRODUCT HIGHLIGHTS
upon request).
l Stainless steel hose reel
with automatic spring return lIdeal for washing facilities.
(Additional models available lWall mounting.
O T H E R A P P L I C AT I O N S
BREAK-AWAY COUPLING
The break-away coupling is designed to break away when strong traction
is applied, when mobile equipment is moved while still connected to the
installation.
PRODUCT HIGHLIGHTS
12
SWAGED FITTING NRS® (Non retention System)
The swaged fitting NRS® can be assembled on all Gecitech hoses.
The fittings are manufactured to avoid diameter differences between the nipple and the pipe in
order to ensure a continuous flow of the transferred product. The swaged assembly brings a better
non-retention safety by avoiding bacteria entrapment areas.
PRODUCT HIGHLIGHTS
l Bend connections 90° or 45°, as well as the spe- l Each flexible hose is tagged with a manufacturing
cial assemblies are manufactured with orbital type batch number to allow the traceability and the qua-
welding. All the straight connections are one part, lity monitoring of the flexible. To identify the transfer
without welding. The concept of assembly can be product, a colour identification can be added onto the
cleaned in place (CIP) without disassembling. hose.
l The inside surface quality of the connections is l The NRS® range can be assembled with many
Gecitech smooth (roughness <0,8μ) Grinding or electro po- styles of fittings (SMS, CLAMP, DIN, RJT, ISS, GAS,
assembly lishing is also available upon request. After swaging, etc.).
the outside of the ferrule is polished.
PRODUCT HIGHLIGHTS
l This screw-on fitting allows assembly and to ensure a continuous flow of the transfer product.
disassembley without special tools and without l The VNRS® system avoids bacteriological gaps .
galling (non-galling rings*). Can be cleaned with
normal CIP procedure (Gecitech patented system). l The VNRS® range can be assembled with many
styles of fittings (SMS, CLAMP, DIN, RJT, ISS, GAS,
l The connection between hose and fitting is spe- etc.).
cially designed to avoid differences in diameter and
A S S E M B LY O P T I O N S
MSP® REUSABLE FITTING
The MSP® fitting is in 316L stainless steel and can be assembled on GSI® 75NT and 75 NTP hoses.
PRODUCT HIGHLIGHTS
Gecitech
assembly
REUSABLE FERRULES
The reusable ferrules can be assembled on Depotal® and Nitrifood® hoses ranges.
PRODUCT HIGHLIGHTS
l The assembly is easy and fast, made with two l The reusable ferrules range can be assembled
half stainless steel or aluminium ferrules with with many styles of fittings (SMS, CLAMP, DIN, RJT,
screws and nuts. ISS, GAS, etc.).
l Perfect for maintenance service, these reusable
ferrules avoid production down-time with quick
repair.
13
316L stainless steel fittings (Other materials on request)
14
316L stainless steel fittings (Other materials on request)
All parts of our production are unitarily tagged with the production batch number.
15
LASER MARKING COLOUR TRACKING
GECITECH has a high performance laser marking Color identification by extruded silicone sleeve or shrinkable
equipment which offers many identification sleeve. This system allows the hose identification by area of
possibilities. use or by type of transfer product.
HOSES CLEANING
GECITECH KNOW-HOW
QUALITY SERVICES n
STANDARDS COMPLIANCE
16
TRACE@BILITY BY GECITECH by RFID / Data Matrix
PRODUCT HIGHLIGHTS
C
IT E
GEC
TRACE@BILITY BY GECITECH
p
m
Pu
ve
l
Va
TURNKEY SOLUTION
www.gecitech.com
USA Branch - GECITECH, LLC Japan Branch - GECITECH ASIA CO., Ltd
357 Spook Rock Road - Suffern, NY 10901 2-20-1 MISAKI-CHO, CHIYODA-KU - TOKYO 101-0061
sales@gecitech.com - % +1 845 357 3900 mailjp@gecitech.jp - % +81 (3) 3263-7317
EAB.8008.02 05/18