Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1) Download the Mega.nz link as ZIP and exctract the conten: https://mega.nz/#F!
QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
3) Install "Win32DiskImager-0.9.5.exe"
5) Connect the bricked device to the computer. At this time the device still won't
turn on. Windows will recongnize the device as "Qualcomm hs-usb qdloader 9008"; if
Windows recognizes the device you can disconnect it
8) In the folder you will also find the pictures (1-8) to follow the steps
http://i.imgur.com/6OrWrlE.png
http://i.imgur.com/eQqZgX6.png
http://i.imgur.com/cs0IRvq.png
http://i.imgur.com/pozzf59.png
http://i.imgur.com/ufEdrs2.png
http://i.imgur.com/UEs6HxZ.png
http://i.imgur.com/MLtr5tH.png
http://i.imgur.com/d6gvUbi.png
9) If you have a working N910F (or another working Samsung device) that you want to
use to unbrick your bricked N910F, go to step 10. If you only have your bricked
N910F go to step 19
11) Insert the SD-Card in the working device and power it on if you haven't. Go to
settings and format he SD-Card.
12) Power the working device off and put it into download mode:
Press and hold Volume Down + Home + Power buttons at the same time, for a few
moments.
To continue press Volume Up
14) Make sure in Odin the squares are ticked like the 'YELLOW marker' [PICTURE 1].
Also make sure that the device shows up in Odin (ID:COM should be a blue bar)
[PICTURE 1]: http://i.imgur.com/6OrWrlE.png
15) Click "PIT"; go to the root folder, navigate to "Note 4" > "511" and open the
file "APQ8084_boot_recovery_v2.pit"
16) Click "BL"; go to the root folder, navigate to "Note 4" > "511" and open the
file
"BL_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT.tar.md5". If
you get an error choose the file "BL.tar.md5" from the folder "N910FXXU1DPI1"
17) Click "Start" and wait untill you see "PASS!" in Odin
21) Click the blue folder icon and navingate to the root folder. Open the file "".
22) Next to the blue folder click the option box under the text "Device" and make
sure you select the driver letter of the SD-Card
23) Click "Write" and wait untill the image has been written to the SD-Card
24) Install "epm.exe" from the root folder and run it. Click "Start the Program"
and make sure the SD-Card is partitioned as shown: [PICTURE 8]
[PICTURE 8]: http://i.imgur.com/d6gvUbi.png
25) Put the SD-Card in the bricked N910F and connect it with the computer
27) In Odin click "Reset" and make sure the squares are ticked like the 'YELLOW
marker' [PICTURE 7].
[PICTURE 7]: http://i.imgur.com/MLtr5tH.png
28) Click "BL"; go to the root folder, navigate to "Note 4" > "511" and open the
file
"BL_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT.tar.md5".
29) Click "AP"; go to the root folder, navigate to "Note 4" > "511" and open the
file
"AP_N910FXXU1DPI1_CL9117724_QB10791804_REV00_user_low_ship_MULTI_CERT.tar.md5".
30) Click "CP"; go to the root folder, navigate to "Note 4" > "511" and open the
file "CP_N910FXXU1DPH1_REV00_CL_2068963.tar.md5".
31) Click "CSC"; go to the root folder, navigate to "Note 4" > "511" and open the
file
"CSC_VFR_N910FVFR1DPF1_CL8447885_QB10051693_REV00_user_low_ship_MULTI_CERT.tar.md5"
.
32) Click "Start" and wait untill you see "PASS!" in Odin
33) If the device can't boot up normal or Odin didn't "PASS!" and there's a message
like this: "ODIN flash read failure / mmc read fail" put the device into download
mode again.
34) In Odin click "Reset" and make sure the squares are ticked like the 'YELLOW
marker' [PICTURE 6].
[PICTURE 6]: http://i.imgur.com/UEs6HxZ.png
35) Click "PIT"; go to the root folder, navigate to "Note 4" > "511" and open the
file "TRLTE_EUR_OPEN.pit"
36) Click "Start" and wait untill you see "PASS!" in Odin
Edit:
37) If Odin didn't "PASS!" but rather "FAIL!", redo steps 27-32 until you unbridled
your N910F.
Don't forget to report back on xda as well, so that other users will know about the
ongoing.