Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3
23 13/32"
1 1/8"
28.6
Plastic Free-Spinning Knobs.
3 3/4"
Prefer To Have The Mold Deep Enough To
95.0
1/4" (6.2 mm) Carriage Bolts. Countersink Heads
Complete Envelope The Guitar. Then, When It Is At Form Floor Bottom. Provide (4) Bolts / With (2)
2 1/4"
4 1/2"
Time To Glue The Back Place, Wood Shims Are
114.0
57.0
At Each Side.
Placed Inside The Mold To Lift The Entire Guitar Up
So It Sticks Above The Top Of The Mold About 3/4"
To 1".
3/8"
9.4
This Layer Of Plywood Is The
"Floor" Of The Mold. 3/4" (19
19.0
3/4"
mm) Plywood Is The Minimum
Dimension You Should Use.
468.8
18 15/32"
3 3/4"
1/4" (6.2 mm) Carriage Bolts. Countersink Heads
95.0
At Form Floor Bottom. Provide (4) Bolts / With (2)
At Each Side.
Note: Be Sure To Put A Slight Radius At All
Edges Of Mold, Both Interior And Exterior. A
1/16" or 1.5 mm Radius Should Be Adequate.
19.0
3/4"
Guitar Inside Mold - Tail End View
1937 Hauser Classical Guitar Shape