Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Data communications are the exchange of data between two devices via some form of
transmission medium such as a wire cable. For data communications to occur, the
communicating devices must be part of a communication system made up of a combination of
hardware (physical equipment) and software (programs).
Delivery. The system must deliver data to the correct destination. Data must be received by the
intended device or user and only by that device or user.
Accuracy. The system must deliver the data accurately. Data that have been altered in transmission
and left uncorrected are unusable.
Timeliness. The system must deliver data in a timely manner. Data delivered late are useless. In
the case of video and audio, timely delivery means delivering data as they are produced, in the
same order that they are produced, and without significant delay. This kind of delivery is called
real-time transmission.
Jitter. Jitter refers to the variation in the packet arrival time. It is the uneven delay in delivery of
audio or video packets. For example, let us assume that video packets are sent every 3D ms. If some
of the packets arrive with 3D-ms delay and others with 4D-ms delay, an uneven quality in the video
is the result.
Parallel transmission:
Binary data, consisting of Is and Os, may be organized into groups of n bits each. Computers
produce and consume data in groups of bits. By grouping, we can send data n bits at a time
instead of 1. This is called parallel transmission.
The mechanism for parallel transmission is a conceptually simple one: Use n wires to send n
bits at one time. That way each bit has its own wire, and all n bits of one group can be
transmitted with each clock tick from one device to another. Fig 2
Typically, the eight wires are bundled in a cable with a connector at each end.
The advantage of parallel transmission is speed. All else being equal, parallel transmission can
increase the transfer speed by a factor of n over serial transmission. But there is a significant
disadvantage: cost. Parallel transmission requires n communication lines (wires in the example)
just to transmit the data stream. Because this is expensive, parallel transmission is usually
limited to short distances.
Serial Transmission:
In serial transmission one bit follows another, so we need only one communication channel
rather than n to transmit data between two communicating devices. The advantage of serial
over parallel transmission is that with only one communication channel, serial transmission
reduces the cost of transmission over parallel by roughly a factor of n.
Since communication within devices is parallel, conversion devices are required at the interface
between the sender and the line (parallel-to-serial) and between the line and the receiver (serial-
to-parallel).
Asynchronous Transmission:
Switching:
A network is a set of connected devices. Whenever we have multiple devices, we have the
problem of how to connect them to make one-to-one communication possible.
A switched network consists of a series of interlinked nodes, called switches. Switches are
devices capable of creating temporary connections between two or more devices linked to the
switch. In a switched network, some of these nodes are connected to the end systems
(computers or telephones, for example). Others are used only for routing.
An internet is a switched network in which a switch connects at least two links together. A
switch needs to forward data from a network to another network when required. The two most
common types of switched networks are circuit-switched and packet-switched networks.