Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
4 A CAPACITY,
THE VARIETY OF CONTACT
ARRANGEMENTS
S RELAYS
FEATURES
12.0
28.0 .472 • The variety of contact arrangements • Wide switching range From 100μA
1.102
2 Form A 2 Form B, 3 Form A 1 Form 100 mV DC to 4 A 250 V AC
10.4
.409 B, 4 Form A • Low thermal electromotive force
• Latching types available Approx. 3 μV
• High sensitivity in small size 100 mW • Dual-In-Line packaging arrangement
pick-up and 200 mW nominal
operating power
• High shock and vibration resistance
mm inch Shock: 50 G Vibration: 10 to 55 Hz at
double amplitude of 3 mm .118 inch
SPECIFICATIONS
Contacts Characteristics (at 25°C 77°F 50% Relative humidity)
2 Form A 2 Form B, 20 cpm for maximum load,
Arrangement 3 Form A 1 Form B, Max. operating speed 50 cps for low-level load
4 Form A (1 mA 1 V DC)
Initial contact resistance, max. Initial insulation resistance*1 10,000 MΩ at 500 V DC
50 mΩ
(By voltage drop 6 V DC 1 A) Between open contacts 750 Vrms
Initial contact pressure Approx. 12 g .42 oz Initial
Between contact sets 1,000 Vrms
breakdown
Contact material Au clad Ag alloy (Cd free) Between contacts and
voltage*2 1,500 Vrms
Electrostatic capacitance Approx. 3pF coil
Thermal electromotive force Operate time* 3
Approx. 3μV Max. 15 ms (Approx. 8 ms)
(at nominal coil voltage) (at nominal voltage)(at 20°C)
Nominal switching capacity 4 A 250 V AC, 3 A 30 V DC Release time (without diode)* 3
Max. 10 ms (Approx. 5 ms)
Maximum switching power 1,000 VA, 90 W (at nominal voltage)(at 20°C)
Rating 250 V AC, 30 V DC Set time*3 (latching)
Maximum switching voltage Max. 15 ms (Approx. 8 ms)
(resistive) (48 VDC at less than 0.5 A) (at nominal voltage)(at 20°C)
Max. switching current 4 A (AC), 3 A (DC) Reset time*3 (latching)
Max. 15 ms (Approx. 8 ms)
(at nominal voltage)(at 20°C)
Min. switching capacity#1 100μA 100 m V DC
Initial contact bounce, max. 1 ms
Expected Mechanical (at 50 cps) 108
Max. 35°C with nominal coil
life (min. Electrical 4 A 250 V AC 105 Temperature rise
voltage and at maximum
operations) (at nominal voltage)(at 20°C)
(at 20 cpm) 3 A 30 V DC 2 × 105 switching current
Functional*4 Min. 490 m/s2 {50 G}
Coil (polarized) (at 20°C 68°F) Shock resistance
Destructive*5 Min. 980 m/s2 {100 G}
Single side Minimum operating power Approx. 100 mW
stable 176.4 m/s2 {18 G}, 10 to 55 Hz
Nominal operating power Approx. 200 mW Functional*6
at double amplitude of 3 mm
Minimum set and reset Approx. 100 mW Vibration resistance
Latching 235.2 m/s2 {24 G}, 10 to 55 Hz
Nominal set and reset Approx. 200 mW Destructive
at double amplitude of 4 mm
Notes: Conditions for operation, Ambient –40°C to +65°C
#1 This value can change due to the switching frequency, environmental transport and storage*7 temp. –40°F to +149°F
conditions, and desired reliability level, therefore it is recommended to check this (Not freezing and condens-
with the actual load. ing at low temperature) Humidity 5 to 85% R.H.
Remarks
* Specifications will vary with foreign standards certification ratings.
Unit weight Approx. 8 g .28 oz
*1 Measurement at same location as “Initial breakdown voltage” section
*2 Detection current: 10mA
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10μs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10μs
*7 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (p. 19, Relay Technical Information).
TYPICAL APPLICATIONS
Telecommunications equipment, data processing equipment,
facsimiles, alarm equipment, measuring equipment.
ds_61105_0000_en_s: 151106D 1
S
ORDERING INFORMATION
Ex. S 2 L2 48 V
DIMENSIONS mm inch
1 10–0.5
.039 .394–0.02
4 0.5 2.54
.157 0.4 .020 .100
1.0 .016
1.4 .039 7.62
.055 .300
12-1.3 DIA.
3 .047-.051 DIA.
1 2 3 4 5 6
7.62 12 2.54
.118 .472 .100
12 11 10 9 8 7 .300
0.5 5.08
.020 .200
2 ds_61105_0000_en_s: 151106D
S
Schematic (Bottom view)
Single side stable 2a2b 1 2 3 4 5 6 3a1b 1 2 3 4 5 6 4a 1 2 3 4 5 6
Deenergized position + + +
- - -
12 11 10 9 8 7 12 11 10 9 8 7 12 11 10 9 8 7
REFERENCE DATA
1. Maximum switching power 2. Life curve 3. Contact reliability
Condition: 1V DC, 1mA
Detection level 10 Ω
Tasted Sample: S4-24V, 10pcs
50.0
4
100 30.0
Life, ×10
100
10.0
50 5.0
30 2.0
10 m = 1.6
125 V AC 1.0 μ: 79 million time
(cosϕ = 1.0) σ: 51 million time
10 0.5 95% reliability limit:
250 V AC
(cosϕ = 1.0) 0.2 14.6 million times
(weibul probability paper)
0.1
0.1 1 10 0 1 2 3 4 5 1.0 10.0
7
Contact current, A Contact current, A No. of operations, ×10
4.-(1) Coil temperature rise 4.-(2) Coil temperature rise 5. Operate and release time
Tested Sample: S4-24V, 4 Form A Tested Sample: S4-24V, 4 Form A (Single side stable type)
Tested Sample: S4-24V, 10pcs
100 100 20
90 90 18
Operate/release time, ms
Temperature rise, °C
Temperature rise, °C
80 80 16
70 4A 70 14
60 60 12 Release time (with diode)
50 0A 50 10
Max.
40 40 8
Min.
Coil operating Operate time
30 30 power, 0.2 W 6
Max.
20 20 4 Max. Min.
Min.
10 10 2
Release time
0 0 0
0.2 0.4 0.6 0.8 1.0 1.2 1 2 3 4 5 6 80 100 120 140
Coil operating power, W Contact current, A Coil applied voltage, %V
Rate of change, %
Drop-out voltage
0 0 NF relay S relay
Pick-up voltage Pick-up voltage
—30 —30
5 10 5 10 2 4 6 8 10 12
Inter-relay distance, mm Inter-relay distance, mm Minute
ds_61105_0000_en_s: 151106D 3
S
8. Effect from an external magnetic field
Single side stable Single side stable
Rate of change, %
Rate of change, %
+30 +30
φ φ
–30 –30
50 100 50 100
2 coil latching G 2 coil latching G
Rate of change, %
Rate of change, %
+30 +30
0 0
Pick-up voltage
Pick-up voltage
–30 –30
50 100 50 100
G G
ACCESSORIES
Specifications
Breakdown voltage 1,500 Vrms between terminals
Insulation resistance More than 100 MΩ between terminals at 500 V DC Mega
Heat resistance 150 ±3°C (302 ±5.4°F) for 1 hour.
S Relay Socket, Maximum continuous current 4A
S-PS (Note: Don't insert or remove relays while in the energized condition.)
Dimensions mm inch
7.6
.299
18.3–0.6 5.08 5.08 5.08 5.08 5.08
.720–.024 12-1.6 DIA. HOLE .200 .200 .200 .200 .200
1.2–0.3 12-.063 DIA. HOLE
.047–.012 15.5–0.6
.610–.024
0.4–0.1
.016–.004
4.85–0.3 3.4–0.3
.191–.012 .134–.012
5.08–0.3
7.62–0.3
.200–.012 .300–.012
32.4–0.6
1.5–0.3 1.276–.024 1.5–0.3 Terminal width: 1.3 .051
.059–.012 .059–.012 Terminal thickness: 1.2 .047
Removing method:
(1) Remove the relay straight from the
socket holding the shaded portion of the Fig. 2
relay as shown in Fig. 2.
4 ds_61105_0000_en_s: 151106D
S
NOTES
1. Special use of 2 coil latching types: 2 Reset position of 2a2b type 2. Soldering operations should be
ways can be considered if 2 coil latching accomplished as quick as possible;
types are used as 1 coil latching types. within 10 seconds at 250°C 482°F solder
(A) Reverse polarity is applied to the set temperature or 3 seconds at 350°C
1 2 3 4 5 6
coil of 2 coil latching type. - + 662°F. The header portion being sealed
(B) By shorting terminals 12 and 7, apply with epoxy resin, undue subjection to
plus to 1, minus to 6 at set and plus to 6, heat may cause loss of seal. Solder
minus to 1 at reset. Applied coil voltage 12 11 10 9 8 7 should not be permitted to remain on the
should be the same as the nominal. header.
Operating power will be reduced to one-
half.
O Between 2, 3 and 4, 5: different channels, therefore not possible O Between 2, 3 and 4, 5: same channels, therefore possible
O Between 10, 11 and 8, 9: different channels, therefore not possible O Between 10, 11 and 8, 9: same channels, therefore possible
No good Good
ds_61105_0000_en_s: 151106D 5