Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com
Product Range
Quality without Compromise
TAPCON® 240/260
TAPGUARD™ 240
The on-load tap-changer VACUTAP® AVT The on-load tap-changer VACUTAP® VT with Our first reactance on-load tap changer with
with vacuum interrupters and integrated vacuum interrupters serves for setting the vacuum interrupters and the most impressive
motor drive serves as switching element and ratio of dry-type transformers under load. performance history since its introduction in
for setting the ratio of dry-type transformers 1990. Area of application: primarily the
under load. North American continent.
Max. rated through-current: 150A Max. rated through-current: Max. rated through-current: 1,500…2,500A
Max. rated step voltage: 500V (3-phase) 500A Max. rated step voltage: 2,000V
Max. rated switching capacity: 75kVA Max. rated step voltage: 900V Highest voltage for
Highest voltage for Max. rated switching capacity: equipment Um: 69kV
equipment Um: 11,5kV (single-phase) 250kVA Application: At any randomly selectable
Application: Star point (neutral point) Highest voltage for winding position up to = 69kV
or randomly selectable winding position equipment Um: 40,5kV Operating positions:
up to = 11.5kV Application: Random winding position Without change-over selector: 17
Operating positions: (linear) 9 max. Operating positions: (linear) 9 max. With change-over selector: 33
OILTAP® V OILTAP® MS OILTAP® M
An exceptionally compact on-load tap- A 300A on-load tap-changer for tapped The on-load tap-changer allowing the widest
changer for tapped transformers yielding transformers yielding medium output rates. and most comprehensive scope of applica-
small to medium output rates. tions: From transformers yielding medium
output rates to large power transformers,
process transformers subject to the highest
levels of stress, special transformers...
The OILTAP® RM on-load tap-changer is The on-load tap-changer for the highest The on-load tap-changer for power trans-
composed of the R diverter switch and the voltages and transformer output rates. formers with highest capacities.
M tap selector.
2)
• paper filter design to clean the The motor drive type ED is used exclusively 3)
switching oil for operating on-load tap-changers and off-
• 2 pump unit designs available circuit tap-changers in regulating transform-
• combination filter design to clean ers as well as for operating plunger-core
and dry the switching oil earth-fault neutralizers.
• 2 designs for controlling the 1) 4)
pump unit: The ED motor drive
– control integrated into separate • has a transparent and modular design
control cabinet (swing frame)
– control integrated into the ED • is innovative: variants with electronic con- 1) Mechanical Filling Level Indicators
motor drive trol in connection with tap changer moni- 2) Mechanical Pointer Thermometers
toring (TM100) or voltage regulator 3) Sensors/Transmitters
TAPCON® 240 inside Indicators/Converters
• incorporates decades of experience 4) Pressure Relief Devices
• is available in two protective housing sizes
with the same arrangement of attachment
points
– alluminum cast
– IP 66
© Maschinenfabrik Reinhausen GmbH Phone (+49) 9 41/40 90-0
www.reinhausen.com Falkensteinstrasse 8 Fax (+49) 9 41/40 90-600
93059 Regensburg, Germany E-Mail sales@reinhausen.com
Please note: The data in our publications may differ from the data of devices delivered.
We reserve the right to make changes without notice.
IN 263/01en - 1004/2000 - 263/01/01/0 -F0135400 · dp · Printed in Germany