Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MARINE PROPULSION
SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Emissions............................................................. EPA-IMO
Displacement........................................ 11.95 L (729.23 in3)
Rated Speed................................................................ 2300
Bore....................................................... 130.0 mm (5.12 in)
Stroke.................................................... 150.0 mm (5.91 in)
Aspiration........................................................................ TA
Governor.............................................................. Electronic
Cooling System.......................................... Heat Exchanger
Weight, Net Dry (approx.)...................... 1,044 kg (2,302 lb)
Refill Capacity
Cooling System.....................................45.0 L (11.9 gal)
Lube Oil System..................................... 28.0 L (7.4 gal)
Oil Change Interval.................................................. 250 hrs
Image shown may not reflect Caterpillar Diesel Engine Oil 10W30 or 15W40
actual Engine Center Sump Oil Pan
Rotation (from flywheel end)....................................... CCW
Flywheel and Flywheel Housing.........................SAE NO. 1
Flywheel Teeth
PERFORMANCE CURVES
E-RATING - DM9099-02
Maximum Power
Prop Demand
-------
BSFC g/kW-hr
NOTE: Prop demand data is a cubic prop demand curve with 3.0
exponent for displacement hulls only.
PERFORMANCE CURVES
E-RATING - DM9099-02
Engine Torque lb ft
Maximum Power
Prop Demand
-------
BSFC lb/hp-hr
2300 705 1611 .362 36.5 2300 705 1611 .362 36.5
2200 705 1684 .353 35.6 2200 617 1474 .349 30.8
2100 705 1764 .346 34.9 2100 537 1343 .340 26.1
2000 705 1852 .343 34.5 2000 464 1218 .335 22.2
1900 705 1950 .343 34.5 1900 398 1099 .333 18.9
1800 705 2059 .345 34.7 1800 338 987 .333 16.1
1700 705 2179 .347 34.9 1700 285 880 .334 13.6
1600 679 2227 .349 33.8 1600 237 780 .337 11.4
1500 630 2207 .354 31.8 1500 196 685 .342 9.6
1400 522 1957 .358 26.7 1400 159 597 .347 7.9
1300 373 1506 .360 19.2 1300 127 515 .352 6.4
1200 259 1133 .361 13.3 1200 100 438 .357 5.1
1100 208 993 .362 10.8 1100 77 369 .363 4.0
1000 174 915 .367 9.1 1000 58 305 .373 3.1
900 145 845 .375 7.7 900 42 246 .390 2.4
700 94 704 .399 5.3 700 20 149 .450 1.3
NOTE: Prop demand data is a cubic prop demand curve with 3.0
exponent for displacement hulls only.
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is
only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary
according to the particular application of the engine and operating conditions beyond Caterpillar's control.
Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power
rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft
power.
DIMENSIONS
Engine Dimensions
(1) Length to Flywheel Housing 1573.9 mm 61.96 in
(2) Width 1056.5 mm 41.59 in
(3) Height 1008.7 mm 39.71 in
Weight, Net Dry (approx) 1044 kg 2,302 lb