Sei sulla pagina 1di 2

IDEC Web Server Module Interface Specifications

Part Number Description Communication RS232C <=> Ethernet conversion function


Web Server module including interface cable, manual

Monitor, Control and Maintain


FC4A-ENET Electrical characteristics: Complies with IEEE802.3
on CD-ROM and Quick Start guide
Transmission speed: 10BASE-T/100BASE-TX
Ethernet (Not CE compliant)
Specifications Communication protocol: IP/ICMP/ARP
General Specifications Ethernet protocol: TCP/SMTP/HTTP/Telnet

Production From Anywhere


Rated Power Voltage 24V DC No. of TCP connections: 1

Allowable Voltage Range 20.4 to 26.4V DC Electrical characteristics: EIA RS232C


Transmission speed: 9600 to 115200 bps
Serial I/F
Current Draw 70mA Synchronization: Asynchronous
Specifications
Communication protocol: Full duplex
Allowable Momentary Transmission control: RTS/CTS, XON/OFF, None
10ms maximum
Power Interruption
Ethernet interface: RJ45
Dielectric Strength 500V AC, 1 minute Connection
Serial interface: Mini DIN 8-pin connector
Method
Insulation Resistance 10MΩ minimum (500V DC megger) Cable Type No.: FC4A-KC3C

DC power terminal: 1.0kV, 50ns to 1µs Remote maintenance: Uploading, downloading and
Noise Resistance monitoring using WindLDR via
Ethernet cable: 0.5kV, 50ns to 1µs (coupling clamp)
Ethernet
Inrush Current 4A maximum
Web server: Configure the web server unit using
Operating Temperature 0 to 55˚C Internet Explorer etc. Reading and writing
PLC operands using Java applet.
Storage Temperature –40 to +70˚C (no freezing) Web file area: 512 Kbyte
Relative Humidity 10 to 95% (no condensation) Compliant browser: Internet Explorer 6.0
Major
Netscape 7.2
Functions
Pollution Degree 2 (IEC 60664-1)
Data Exchange:
Corrosion Immunity Free from corrosive gases User communication using Ethernet
Alarm Messaging:
Degree of Protection IP20 (IEC60529) Registered outgoing message
32 message types
When mounted on a DIN rail:
3 characters max.
5 to 9Hz amplitude 3.5 mm
Vibration Resistance 2 email addresses
9 to 150Hz accelaration 9.8m/s2 (1G)
64 address characters max.
2 hours in each of 3 axes
147m/s2 (15G), 11ms duration
Shock Resistance Utility CD: Configuration file, PLC operand monitor sample
3 shocks each in 3 axes
Option programs, sample program configuration
Weight (approx.) 150g instructions, instruction manual

Specifications and other descriptions in this catalog are subject to change without notice.

Dimensions ••Mounting Hole Layout

IDEC
for Direct Mounting
45.0 70.0 45.0
35.0
Connectable Devices
••Programmable Controllers
IDEC FC5A MicroSmart (available soon)
IDEC FC4A MicroSmart
Web Server Module
IDEC FC3A OpenNet Controller
IDEC FC2A Micro3C
70.0
80.0

••Operator Interface
80.0

(RS232C communication with PLC through Ethernet)


IDEC HG2F
∗ 2.1

∗5.6mm when the clamp is pulled out M4 mounting screw


(12 mm or 15 mm)

www.idec.com
1-800-262-IDEC
©2006 IDEC Corporation. All Rights Reserved.
Catalog No. FC9Y-B200-0 17.5k 4/06
Save Time and Experience Faster, Easier Ethernet Connectivity

Remote Maintenance O/I Connectivity


• Easily monitor machine conditions, change machine configurations, • Using the IDEC Web Server Module
or upload and download user programs from anywhere, using IDEC on an Ethernet network, an IDEC PLC
WindLDR software over an Ethernet network. can be configured as a host to an IDEC
• For a more graphical display and remote data archiving, OPC servers, operator interface. This allows the
such as IDEC WindSRV or standard SCADA software, can be used. touchscreen and PLC to be in separate
locations.
• Save time and money:
• No longer hassle with specialized
- Access system parameters
cables and serial connection limitations.
from your desk, conference
room or home to check machine
status without walking
Ethernet
the factory floor.
- If a machine is Ethernet
down, you no
longer need to send
someone with their
laptop to debug or
download a new
user program.
Data Exchange
• An IDEC PLC can transmit and
Web Monitoring receive data with external
FC4A-ENET devices – IDEC PLCs, operator
• Machine status can be monitored and controlled interfaces, or other devices
from any PC using standard internet browsers such – in 1:1 format.
as Internet Explorer or Netscape®. Ethernet
• A built-in custom template, which allows you to
monitor and change system parameters, is included.
• Get more flexibility and control by creating your own
custom templates – for monitoring and managing
your system – using JAVA programming.

Alarm Messaging Password Protection


ID
• Real-time updates of error status or process
• The IDEC Web Server Module can be
conditions can be sent to an email address JSmith configured with password protection to
or cellular phone. Password allow only authorized personnel to gain
• A maximum of 32 customizable messages access to your system.
can be predefined with up to two email
*********
addresses each.

Potrebbero piacerti anche