Sei sulla pagina 1di 4

CA(bold questions are worth more than 2 marks)

Register transfer and microoperations


1.Define micro-operations with examples?
2.what is role of shift register in digital COMPUTER?
3define microoperation.Give format of microoperations.
4.what is the role of registers in digital computer?
5.Consider registers A,B,C,D.. design a common bus data path with
necessary logic circuit to perform the transfer of content of any
register to self or any other registers.draw the logic circuit also.
6.write typical realization of bus architecture.
7.give difference between register and memory.
8.write the functions of computer register.
9.what are the registers generally contained in a processor.
10.write register transfer sequence for read and write operations.
11.define 4 bit arithematic circuit.
Basic Computer Organisation and Design
1.give a micro instruction format.
2.draw and explain the instruction execution cycle with the help of
an example.
3.what are the merits and demerits of single address instructions?
4.what is the difference direct and indirect address instructions.
5.list various memory reference instructions.
6.what are the various types of registers and their functions in basic
computer?explain with block diagram the control unit of basic
computer.
7.The computer uses a memory unit with 256k words of 32bit each.
A binary instruction code is stored in one word of memory.The
instruction has four parts;indirect bit ,an opcode,a register code
part to specify one of the 64 registers ,and an address part.
a.)how many bits are there in an opcode ,the register code and
address part ?
b.)Draw the instruction word format and indicate the number of
bits in each part?
c.)how mmany bit sare there in the data and address inputs of the
memory.
8.what are interrupts?what are there disadvantages?
9.Explain any five memory reference instructions in details.
Design of control unit
1.what is micro-programming ?what are the advantages and
disadvantages of micro programming?
2.what are the difference between the hardwired control
organization and micro programmed control organization.
3.what is difference between micro program and micro code
4.dicuss the different types control units organizations.Compare
and contrast the hardwired control organization and
microprogrammed control.
5.what is the need of microprogrammed control unit in
computer?disccuss various operations performed by microprogram
squencer?
6.how addressing sequence is done in micro programmed control
unit?explain with the help of diagram.
7.what is the difference between hardwired implementation and
micro programmed implementation of a control unit?
8.define control memory.
9.design microprogram sequencer for control frequency.
10.Is it possible to a hardwired control associated with the control
memory.
Central processing unit
(note- ques 2 was repeated more than 4 times so it must given the
importance it deserves)
1. why it is difficult to implement a hardwired control unit for
modern cisc processor?justify.
2.Compare RISC and CISC architectures.(write in detail don’t act
smart.)
3. difference between program interrupt and subroutine.
4.state basic performance equation.

Potrebbero piacerti anche