Sei sulla pagina 1di 1

Fujikura Hengtong

OPGW Cable Cross Section and Technical Data


Aerial Cable System Ltd.
Type:OPGW-48B1-90[115;42.1]

Cross Section:

Named No. Diameter


Structure Center 20%AS wire 1 2.60 mm
Details 20%AS wire 4 2.60 mm
Layer 1
SUS-Tube 2 2.60 mm
Layer 2 20%AS wire 12 2.60 mm

According to DL/T 832、IEEE std 1138、IEC 61089、IEC 60794-4 standards


Stranding direction of outer layer is "Right-hand"
Fiber No. & Type 48 G.652
Technical Standard Diameter 13.00 mm
Data Supporting Cross Section 90.26 mm2
Section of AS wire 90.26 mm2
Approximate mass 636.1 kg/km
Rated Tensile Strength 114.9 kN
Maximum Allowable Tension(40%RTS) 509.2 N/mm2
Everyday Stress(20%RTS) 254.6 N/mm2
Strain Margin Stress(70%RTS) 891.1 N/mm2
Modulus of Elasticity 162.0 GPa
Thermal Elongation Coefficient 13.0 ×10-6/℃
Calculated D.C. Resistance at 20℃ 0.955 Ω/km
Short-Circuit Current (1 sec, 20~200℃) 6.5 kA
Short-Circuit Current Capacity(20~200℃) 42.1 kA2·s
Minimum Bending Radius 260 mm
Ratio between Pull and Weight 18.42 km
Temperature Installation -10℃~+50 ℃
Range: Transportation and Operation -40℃~+80 ℃
Remarks: All Sizes and Values are Nominal Values

Designer: Steven Confirmer: 2018-February-10

Potrebbero piacerti anche