Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
VIKING ENGINEERING
Prepared by/Disiapkan oleh: Approved by/Disetujui Issue 1/Terbitan 1 Date Issued/Tgl terbitan : Document No/No Dokumen:
oleh:
HSE Manager/Manajer K3 Director/Direktur Rev/Revisi 01 Feb 2016 Form VB/CL 02
Pages/Hal:
Document Title/Judul JOB SAFETY ANALYSIS/
Page 1 of 7
Dokumen:
ANALISA KESELAMATAN KERJA
1 Preparation: Human Performance : - Ensure the PTW issued is compatible with the activity Supervisor
Preparation of - Human Error (Issued Wrong - Ensure all persons involved pay attantion on the discussion
procedures. (PTW, JSA PTW, Not focus on JSA - Use loud and clear sound
and Toolbox Talk/ discussion, Sound not clear - Use understood language on the discussion
Meeting) on JSA and TBT discussion - Pastikan PTW yang diterbitkan sesuai dengan pekerjaannya
Persiapan: and missundertand the - Pastikan seluruh pekerja memperhatikan pembahasannya
Persiapan prosedur- discussion) - Gunakan suara yang keras dan jelas
prosedur (PTW, JSA danKinerja Manusia : - Gunakan bahasa yang dipahami saat diskusi
Toolbox Talk/ Meeting) -Kesalahan Manusia
(Menerbitkan PTW yang salah,
Tidak fokus saat pembahasan
JSA, Suara tidak jelas saat
membahas JSA dan TBT, dan
salah mengerti pembahasan)
2 Checking Gas Pressure : -Only competend person and certified person is allow to use Gas detector Supervisor
(H2S,LEL,CO,O2) - Fire or Explosive caused by -Before entering confined space makesure has received permission with
Activity/ Gas leaks can make death work entry permit.
Akitifitas pengecekan fatality to worker and damage - Perform measurements at three points is the top, middle and base
Gas(H2S,LEL, CO,O2) to properties. confined space.
Tekanan : -Evaluate all flow /air circulation to ensure all space is empty, clean and
-Kebakaran dan ledakan ventilated.
disebabkan Gas yang bocor -If the concentration of oxygen in the confined space of less than 20.8 from
bisa menyebabkan kematian the air volume, it may not be entered by a person without a breathing
yang fatal pada pekerja dan apparatus.
kerusakan pada benda -If LEL : <1%, O2 : between 19.5 % -22.20%, H2S : < 1PPH, CO : <1PPH
Worker can working without breathing apparatus.
PT. VIKING ENGINEERING
Prepared by/Disiapkan oleh: Approved by/Disetujui Issue 1/Terbitan 1 Date Issued/Tgl terbitan : Document No/No Dokumen:
oleh:
HSE Manager/Manajer K3 Director/Direktur Rev/Revisi 01 Feb 2016 Form VB/CL 02
Pages/Hal:
Document Title/Judul JOB SAFETY ANALYSIS/
Page 2 of 7
Dokumen:
ANALISA KESELAMATAN KERJA
Chemical : - To seperate the storage of oxygen cylinder and acetylene cylinder at least
- Flammable vapors (storage/ 2 meters.
location of oxygen and - To keep the cylinders in proper storage.
acetylene cylinder to close) - Pisahkan setidaknya 2M jarak antara tabung oxygen dengan tabung
Kimia : asetilen
-Uap mudah terbakar - Untuk menyimpan tabung di tempat yang sesuai
4 Marking Activity Motion : - Use tool aids for reaching the unreachable marking area. Supervisor
Aktifitas Penandaan - Straining / bending during - Gunakan alat bantu untuk menjangkau area penandaan yang tidak
marking. terjangkau.
Gerakan :
- Posisi tegang / bungkuk saat
penandaan.
Sound : - Use hearing protection (earplug) while do the marking with hammer.
- Noise of pounding from Gunakan pelindung pendengaran (earplug) saat melakukan penandaan
hammer while marking. menggunakan palu.
Bising :
-Kebisingan akibat ketukan
palu saat penandaan.
PT. VIKING ENGINEERING
Prepared by/Disiapkan oleh: Approved by/Disetujui Issue 1/Terbitan 1 Date Issued/Tgl terbitan : Document No/No Dokumen:
oleh:
HSE Manager/Manajer K3 Director/Direktur Rev/Revisi 01 Feb 2016 Form VB/CL 02
Pages/Hal:
Document Title/Judul JOB SAFETY ANALYSIS/
Page 4 of 7
Dokumen:
ANALISA KESELAMATAN KERJA
5 Cutting Activities: Temperature : - Ensure working area free from any flammable material. Supervisor
Structural beam, plate. - Open Flame - Ensure Fire Extinguisher (at least DP 6KG) standby near the hot work
Kegiatan Pemotongan: - Ignition Source activity.
Struktur beam, Plat. - Hot surface - No painting activities near location of cutting activity.
Suhu : - Use welding gloves to hold/ take the cutted material.
- Api Terbuka - Only authorized person allow to do the hot work activities.
- Sumber Nyala Api - Provide one fire watcher at working area
-Permukaan Panas - Pastikan area kerja bebas dari material yang mudah terbakar.
- Pastikan APAR (minimal DP 6KG) berada dekat dengan kegiatan kerja
panas.
- Dilarang melakukan aktifitas pengecatan dekat dengan area pemotongan.
- Gunakan sarung tangan welding untuk memegang/mengambil material
yang sudah dipotong.
-Hanya orang yang berkepentingan dibenarkan untuk melakukan pekerjaan
panas.
-Menyediakan satu orang fire watcher di area bekerja
PT. VIKING ENGINEERING
Prepared by/Disiapkan oleh: Approved by/Disetujui Issue 1/Terbitan 1 Date Issued/Tgl terbitan : Document No/No Dokumen:
oleh:
HSE Manager/Manajer K3 Director/Direktur Rev/Revisi 01 Feb 2016 Form VB/CL 02
Pages/Hal:
Document Title/Judul JOB SAFETY ANALYSIS/
Page 5 of 7
Dokumen:
ANALISA KESELAMATAN KERJA
6 Erection and Gravity : - Ensure no un-authorized persons near the working area. Supervisor
Modification Activities: - Falling object - Maintain good communication for ordering and ensure the communication
Structural beam, Floor - Falling person clear before do the orders.
plate Gravitasi : - Ensure the area safe to stand.
(Include Welding and - Benda Jatuh - To used full body harness anytime working above 1.8M height.
Grinding) - Orang terjatuh
- When use scaffolding, ensure the scaffolding inspected with client HSE
Aktifitas Pemasangan
Reps to got an approval to use.
dan Modikfikasi:
Struktural beam, Plat - Only certified person do the working at height activity.
Lantai, (Termasuk - Ensure the hook was hooked properly.
Pengelasan dan - Check and ensure the hooked point in good condition.
Gerinda) - To secure all the portable tools/ equipment to prevent it from falling.
- Provide one standby watcher to monitor condition of worker who working at
height.
- Barricade working area to prevent un-authorized person entering the
working area.
- Provede rescue plan before start the activity.
- Provide one fire watcher to each welder
- Pastikan orang tidak berkepentingan tidak mendekati area pekerjaan.
- Menjaga komunikasi yang baik saat memberikan perintah dan pastikan
komunikasi jelas sebelum melakukan perintah.
- Pastikan area aman untuk berdiri.
- Gunakan full body harness setiap melakukan pekerjaan diatas ketinggian
lebih dari 1.8M
- Saat menggunakan perancah, pastikan perancah sudah diperiksa
bersama-sama dengan klien HSE Reps untuk disetujui.
- Hanya orang yang bersertifikat dibenarkan melakukan pekerjaan diatas
ketinggian
- Pastikan pengait sudah terkaitt dengan benar
- Periksa dan pastikan titik pengait dalam keadaan yang baik untuk
- digunakan
- Amankan seluruh alat-alat dan peralatan untuk mencegahnya terjatuh
- Gunakan selalu pelindung kepala (safety helmet)
- Menyediakan satu orang fire watcher setiap welder
PT. VIKING ENGINEERING
Prepared by/Disiapkan oleh: Approved by/Disetujui Issue 1/Terbitan 1 Date Issued/Tgl terbitan : Document No/No Dokumen:
oleh:
HSE Manager/Manajer K3 Director/Direktur Rev/Revisi 01 Feb 2016 Form VB/CL 02
Pages/Hal:
Document Title/Judul JOB SAFETY ANALYSIS/
Page 6 of 7
Dokumen:
ANALISA KESELAMATAN KERJA
7 Housekeeping / Gravity: - Clean the equipment and tools before keep. Supervisor
Housekeeping : - Slip, Trip and Falling - Ensure all equipment and tools have been keep in the proper place before
Gravitasi: leave the area.
-Terpeleset, tersandung dan - Re-check the area to ensure no hazard leave the area.
terjatuh - Bersihkan peralatan dan alat-alat sebelum disimpan.
- Pastikan seluruh peralatan dan alat-alat sudah tersimpan pada tempatnya
sebelum meninggalkan area.
-Periksa kembali area untuk memastikan tidak ada bahaya yang
ditinggalkan sebelum meninggalkan area.
Prepared by : Reviewed by :